counter60.fit

用VHDL语言写的实时时钟 用数码管显示 基于的控制芯片是EP1C6Q24C08

-- MAX+plus II Compiler Fit File      
-- Version 10.12 09/21/2001           
-- Compiled: 12/08/2003 13:14:57      

-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "counter60"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "clr"                          : INPUT_PIN  = 2      ;
    "high0"                        : OUTPUT_PIN = 16     ;
    "high1"                        : OUTPUT_PIN = 19     ;
    "high2"                        : OUTPUT_PIN = 18     ;
    "high3"                        : OUTPUT_PIN = 64     ;
    "low0"                         : OUTPUT_PIN = 17     ;
    "low1"                         : OUTPUT_PIN = 72     ;
    "low2"                         : OUTPUT_PIN = 70     ;
    "low3"                         : OUTPUT_PIN = 73     ;
    "|LPM_ADD_SUB:431|addcore:adder|:55" : LOCATION   = LC6_A5 ;
    ":11"                          : LOCATION   = LC1_A2 ;  -- l3
    ":12"                          : LOCATION   = LC5_A2 ;  -- l2
    ":13"                          : LOCATION   = LC3_A9 ;  -- l1
    ":14"                          : LOCATION   = LC2_A2 ;  -- l0
    ":15"                          : LOCATION   = LC5_A5 ;  -- h2
    ":16"                          : LOCATION   = LC7_A5 ;  -- h1
    ":17"                          : LOCATION   = LC1_A5 ;  -- h0
    ":87"                          : LOCATION   = LC3_A5 ;
    ":165"                         : LOCATION   = LC7_A2 ;
    ":187"                         : LOCATION   = LC6_A2 ;
    ":278"                         : LOCATION   = LC8_A2 ;
    ":287"                         : LOCATION   = LC4_A2 ;
    ":296"                         : LOCATION   = LC1_A9 ;
    ":460"                         : LOCATION   = LC8_A5 ;
    ":478"                         : LOCATION   = LC2_A5 ;
    "~564~1"                       : LOCATION   = LC2_A10;
    "~607~1"                       : LOCATION   = LC3_A2 ;
    "~609~1"                       : LOCATION   = LC4_A5 ;

END;

INTERNAL_INFO "counter60"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC1_A2,->LC5_A2,->LC3_A9,->LC2_A2,->LC5_A5,->LC7_A5,->LC1_A5|";
    OD1P2   : LORAX = "1:FB1->LC1_A2,->LC5_A2,->LC3_A9,->LC2_A2,->LC5_A5,->LC7_A5,->LC1_A5|";
    LC1_A2  : LORAX = "1:MSW0R0C1,G44R0->OH0R0P73,2:PA6R0C8->LC1_A9||";
    LC5_A2  : LORAX = "1:MSW4R0C1,G93R0->OH4R0P70|";
    LC3_A9  : LORAX = "1:MSW2R0C9|2:G32R0->OH2R0P72|,2:HHL14R0,PA1R0C1->LC7_A2,->LC6_A2,->LC8_A2,->LC4_A2||";
    LC2_A2  : LORAX = "1:MSW2R0C0,G17R0->OH10R0P17|2:PA17R0C8->LC1_A9||";
    LC5_A5  : LORAX = "1:MSW4R0C4,HHL44R0->OH12R0P18|";
    LC7_A5  : LORAX = "1:MSW6R0C5,HHL24R0->OH14R0P19|";
    LC1_A5  : LORAX = "1:MSW0R0C4,HHL18R0->OH8R0P16|";
    LC3_A5  : LORAX = "1:MSW2R0C4,HHL0R0|2:PA21R0C1->LC1_A2,->LC5_A2,->LC2_A2|,2:PA1R0C8->LC3_A9||";
    LC7_A2  : LORAX = "1:MSW6R0C1,HHL32R0|2:PA3R0C4->LC8_A5,->LC2_A5|,2:PA15R0C9->LC2_A10||";
    LC6_A2  : LORAX = "1:MSW5R0C1,HHL28R0|2:PA7R0C4->LC5_A5,->LC1_A5,->LC8_A5,->LC2_A5|,2:PA7R0C9->LC2_A10||";
    LC2_A10 : LORAX = "1:MSW2R0C8,HHL1R0,PA0R0C4->LC7_A5|";
    LC4_A5  : LORAX = "1:MSW3R0C5,HHL10R0|2:PA12R0C1->LC1_A2,->LC5_A2,->LC2_A2|,2:PA12R0C8->LC3_A9||";
	LC6_A5  : LORAX2 = "X, X, LC7_A5, LC1_A5";
	LC1_A2  : LORAX2 = "X, LC8_A2, LC3_A5, LC4_A5";
	LC5_A2  : LORAX2 = "X, LC4_A2, LC3_A5, LC4_A5";
	LC3_A9  : LORAX2 = "X, LC1_A9, LC3_A5, LC4_A5";
	LC2_A2  : LORAX2 = "X, LC3_A5, LC4_A5, LC3_A2";
	LC5_A5  : LORAX2 = "LC4_A5, LC3_A5, LC6_A2, LC8_A5";
	LC7_A5  : LORAX2 = "LC4_A5, LC7_A5, LC1_A5, LC2_A10";
	LC1_A5  : LORAX2 = "LC4_A5, LC3_A5, LC6_A2, LC2_A5";
	LC3_A5  : LORAX2 = "X, LC5_A5, LC7_A5, LC1_A5";
	LC7_A2  : LORAX2 = "LC5_A2, LC3_A9, LC2_A2, LC1_A2";
	LC6_A2  : LORAX2 = "LC5_A2, LC3_A9, LC2_A2, LC1_A2";
	LC8_A2  : LORAX2 = "LC5_A2, LC3_A9, LC2_A2, LC1_A2";
	LC4_A2  : LORAX2 = "LC5_A2, LC3_A9, LC1_A2, LC2_A2";
	LC1_A9  : LORAX2 = "X, LC3_A9, LC1_A2, LC2_A2";
	LC8_A5  : LORAX2 = "LC5_A5, LC6_A5, LC6_A2, LC7_A2";
	LC2_A5  : LORAX2 = "X, LC1_A5, LC6_A2, LC7_A2";
	LC2_A10 : LORAX2 = "X, X, LC6_A2, LC7_A2";
	LC3_A2  : LORAX2 = "LC6_A2, LC2_A2, LC1_A2, LC7_A2";
	LC4_A5  : LORAX2 = "X, LC5_A5, LC7_A5, LC1_A5";
END;