count_100.fit

多功能秒表的设计

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 12/10/2003 13:12:09      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "count_100"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "clr"                          : INPUT_PIN  = 2      ;
    "co"                           : OUTPUT_PIN = 65     ;
    "gewei0"                       : OUTPUT_PIN = 23     ;
    "gewei1"                       : OUTPUT_PIN = 24     ;
    "gewei2"                       : OUTPUT_PIN = 21     ;
    "gewei3"                       : OUTPUT_PIN = 25     ;
    "shiwei0"                      : OUTPUT_PIN = 67     ;
    "shiwei1"                      : OUTPUT_PIN = 66     ;
    "shiwei2"                      : OUTPUT_PIN = 22     ;
    "shiwei3"                      : OUTPUT_PIN = 64     ;
    "clr~1"                        : LOCATION   = LC1_B16;
    "|COUNT_10:9|:3"               : LOCATION   = LC4_B22;
    "|COUNT_10:9|:9"               : LOCATION   = LC8_B1 ;  -- |COUNT_10:9|coun_103
    "|COUNT_10:9|:10"              : LOCATION   = LC1_B1 ;  -- |COUNT_10:9|coun_102
    "|COUNT_10:9|:11"              : LOCATION   = LC6_B1 ;  -- |COUNT_10:9|coun_101
    "|COUNT_10:9|:12"              : LOCATION   = LC4_B1 ;  -- |COUNT_10:9|coun_100
    "|COUNT_10:9|:53"              : LOCATION   = LC5_B1 ;
    "|COUNT_10:9|:62"              : LOCATION   = LC2_B1 ;
    "|COUNT_10:10|:3"              : LOCATION   = LC5_B22;
    "|COUNT_10:10|:9"              : LOCATION   = LC6_B22;  -- |COUNT_10:10|coun_103
    "|COUNT_10:10|:10"             : LOCATION   = LC2_B22;  -- |COUNT_10:10|coun_102
    "|COUNT_10:10|:11"             : LOCATION   = LC3_B22;  -- |COUNT_10:10|coun_101
    "|COUNT_10:10|:12"             : LOCATION   = LC1_B22;  -- |COUNT_10:10|coun_100
    "|COUNT_10:10|:53"             : LOCATION   = LC7_B22;
    "|COUNT_10:10|:62"             : LOCATION   = LC8_B22;

END;

INTERNAL_INFO "count_100"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC4_B22,->LC8_B1,->LC1_B1,->LC6_B1,->LC4_B1|";
    OD1P2   : LORAX = "1:FB1->LC8_B1,->LC1_B1,->LC6_B1,->LC4_B1,->LC6_B22,->LC2_B22,->LC3_B22,->LC1_B22|2:FH1R1,PA20R1C15->LC1_B16||";
    LC1_B16 : LORAX = "1:MSW0R1C15,G42R1,PA17R1C21->LC4_B22,->LC5_B22|";
    LC8_B1  : LORAX = "1:MSW7R1C0,HHL46R1->OH15R1P25|";
    LC1_B1  : LORAX = "1:MSW0R1C0,HHL22R1->OH8R1P21|";
    LC6_B1  : LORAX = "1:MSW5R1C0,G94R1->OH13R1P24|";
    LC4_B1  : LORAX = "1:MSW3R1C1,HHL13R1->OH11R1P23|";
    LC5_B1  : LORAX = "1:MSW4R1C1,G93R1,PA0R1C21->LC4_B22|";
    LC5_B22 : LORAX = "1:MSW4R1C21,HHR38R1->OH4R1P65|";
    LC6_B22 : LORAX = "1:MSW6R1C20,HHR40R1->OH6R1P64|";
    LC2_B22 : LORAX = "1:MSW1R1C21,G34R1->OH9R1P22|";
    LC3_B22 : LORAX = "1:MSW2R1C21,HHR14R1->OH2R1P66|";
    LC1_B22 : LORAX = "1:MSW0R1C21,HHR19R1->OH0R1P67|";
	LC1_B16 : LORAX2 = "X, X, X, OD1P2";
	LC4_B22 : LORAX2 = "LC1_B16, X, X, LC5_B1";
	LC8_B1  : LORAX2 = "LC6_B1, LC1_B1, LC8_B1, LC4_B1";
	LC1_B1  : LORAX2 = "LC6_B1, LC1_B1, LC8_B1, LC4_B1";
	LC6_B1  : LORAX2 = "X, LC6_B1, LC4_B1, LC8_B1";
	LC4_B1  : LORAX2 = "LC2_B1, LC4_B1, LC5_B1, LC8_B1";
	LC5_B1  : LORAX2 = "LC6_B1, LC1_B1, LC8_B1, LC4_B1";
	LC2_B1  : LORAX2 = "LC1_B1, LC6_B1, LC4_B1, LC8_B1";
	LC5_B22 : LORAX2 = "LC1_B16, X, X, LC7_B22";
	LC6_B22 : LORAX2 = "LC3_B22, LC2_B22, LC6_B22, LC1_B22";
	LC2_B22 : LORAX2 = "LC3_B22, LC2_B22, LC6_B22, LC1_B22";
	LC3_B22 : LORAX2 = "X, LC3_B22, LC1_B22, LC6_B22";
	LC1_B22 : LORAX2 = "LC8_B22, LC1_B22, LC7_B22, LC6_B22";
	LC7_B22 : LORAX2 = "LC3_B22, LC2_B22, LC6_B22, LC1_B22";
	LC8_B22 : LORAX2 = "LC2_B22, LC3_B22, LC1_B22, LC6_B22";
END;