prev_cmp_freq2_2.qmsg

奇数分频:2.2倍分频,其他任意奇数倍的分频可扩展得到.

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0 "" 0 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Analysis & Synthesis Quartus II " "Info: Running Quartus II Analysis & Synthesis" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 8.0 Build 215 05/29/2008 SJ Full Version " "Info: Version 8.0 Build 215 05/29/2008 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0 "" 0 0} { "Info" "IQEXE_START_BANNER_TIME" "Sun Dec 21 15:12:56 2008 " "Info: Processing started: Sun Dec 21 15:12:56 2008" {  } {  } 0 0 "Processing started: %1!s!" 0 0 "" 0 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0 "" 0 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_map --read_settings_files=on --write_settings_files=off freq2_2 -c freq2_2 " "Info: Command: quartus_map --read_settings_files=on --write_settings_files=off freq2_2 -c freq2_2" {  } {  } 0 0 "Command: %1!s!" 0 0 "" 0 0}
{ "Warning" "WSGN_SEARCH_FILE" "freq2_2.v 1 1 " "Warning: Using design file freq2_2.v, which is not specified as a design file for the current project, but contains definitions for 1 design units and 1 entities in project" { { "Info" "ISGN_ENTITY_NAME" "1 freq2_2 " "Info: Found entity 1: freq2_2" {  } { { "freq2_2.v" "" { Text "D:/EDA/altera/80/quartus/Z_my_project_08/freq2_2/freq2_2.v" 1 -1 0 } }  } 0 0 "Found entity %1!d!: %2!s!" 0 0 "" 0 0}  } {  } 0 0 "Using design file %1!s!, which is not specified as a design file for the current project, but contains definitions for %2!llu! design units and %3!llu! entities in project" 0 0 "" 0 0}
{ "Info" "ISGN_START_ELABORATION_TOP" "freq2_2 " "Info: Elaborating entity \"freq2_2\" for the top level hierarchy" {  } {  } 0 0 "Elaborating entity \"%1!s!\" for the top level hierarchy" 0 0 "" 0 0}
{ "Info" "ICUT_CUT_TM_SUMMARY" "16 " "Info: Implemented 16 device resources after synthesis - the final resource count might be different" { { "Info" "ICUT_CUT_TM_IPINS" "1 " "Info: Implemented 1 input pins" {  } {  } 0 0 "Implemented %1!d! input pins" 0 0 "" 0 0} { "Info" "ICUT_CUT_TM_OPINS" "1 " "Info: Implemented 1 output pins" {  } {  } 0 0 "Implemented %1!d! output pins" 0 0 "" 0 0} { "Info" "ICUT_CUT_TM_LCELLS" "14 " "Info: Implemented 14 logic cells" {  } {  } 0 0 "Implemented %1!d! logic cells" 0 0 "" 0 0}  } {  } 0 0 "Implemented %1!d! device resources after synthesis - the final resource count might be different" 0 0 "" 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Analysis & Synthesis 0 s 1  Quartus II " "Info: Quartus II Analysis & Synthesis was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "160 " "Info: Peak virtual memory: 160 megabytes" {  } {  } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "" 0 0} { "Info" "IQEXE_END_BANNER_TIME" "Sun Dec 21 15:13:02 2008 " "Info: Processing ended: Sun Dec 21 15:13:02 2008" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:06 " "Info: Elapsed time: 00:00:06" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "" 0 0} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:03 " "Info: Total CPU time (on all processors): 00:00:03" {  } {  } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "" 0 0}
{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0 "" 0 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 8.0 Build 215 05/29/2008 SJ Full Version " "Info: Version 8.0 Build 215 05/29/2008 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0 "" 0 0} { "Info" "IQEXE_START_BANNER_TIME" "Sun Dec 21 15:13:07 2008 " "Info: Processing started: Sun Dec 21 15:13:07 2008" {  } {  } 0 0 "Processing started: %1!s!" 0 0 "" 0 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0 "" 0 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off freq2_2 -c freq2_2 " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off freq2_2 -c freq2_2" {  } {  } 0 0 "Command: %1!s!" 0 0 "" 0 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "freq2_2 EP2C35F672C6 " "Info: Selected device EP2C35F672C6 for design \"freq2_2\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0 "" 0 0}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Info: Low junction temperature is 0 degrees C" {  } {  } 0 0 "%1!s! is %2!s!" 0 0 "" 0 0}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "Info: High junction temperature is 85 degrees C" {  } {  } 0 0 "%1!s! is %2!s!" 0 0 "" 0 0}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 0 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "" 0 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C50F672C6 " "Info: Device EP2C50F672C6 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C70F672C6 " "Info: Device EP2C70F672C6 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "" 0 0}
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "3 " "Info: Fitter converted 3 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ASDO~ E3 " "Info: Pin ~ASDO~ is reserved at location E3" {  } { { "d:/eda/altera/80/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/altera/80/quartus/bin/pin_planner.ppl" { ~ASDO~ } } } { "d:/eda/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~ASDO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~nCSO~ D3 " "Info: Pin ~nCSO~ is reserved at location D3" {  } { { "d:/eda/altera/80/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/altera/80/quartus/bin/pin_planner.ppl" { ~nCSO~ } } } { "d:/eda/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~nCSO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~LVDS150p/nCEO~ AE24 " "Info: Pin ~LVDS150p/nCEO~ is reserved at location AE24" {  } { { "d:/eda/altera/80/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/altera/80/quartus/bin/pin_planner.ppl" { ~LVDS150p/nCEO~ } } } { "d:/eda/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~LVDS150p/nCEO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0 0}  } {  } 0 0 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "" 0 0}
{ "Warning" "WFIOMGR_PINS_MISSING_LOCATION_INFO" "2 2 " "Warning: No exact pin location assignment(s) for 2 pins of 2 total pins" { { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "freq2_2 " "Info: Pin freq2_2 not assigned to an exact location on the device" {  } { { "d:/eda/altera/80/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/altera/80/quartus/bin/pin_planner.ppl" { freq2_2 } } } { "freq2_2.v" "" { Text "D:/EDA/altera/80/quartus/Z_my_project_08/freq2_2/freq2_2.v" 8 -1 0 } } { "d:/eda/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { freq2_2 } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "clk " "Info: Pin clk not assigned to an exact location on the device" {  } { { "d:/eda/altera/80/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/eda/altera/80/quartus/bin/pin_planner.ppl" { clk } } } { "freq2_2.v" "" { Text "D:/EDA/altera/80/quartus/Z_my_project_08/freq2_2/freq2_2.v" 7 -1 0 } } { "d:/eda/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/eda/altera/80/quartus/bin/TimingClosureFloorplan.fld" "" "" { clk } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0 0}  } {  } 0 0 "No exact pin location assignment(s) for %1!d! pins of %2!d! total pins" 0 0 "" 0 0}