10.03.00_example_10-2.sv

system verilog design book examples

/**********************************************************************
 * Cell rewriting and forwarding configuration
 *
 * To simulate this example with stimulus, invoke simulation on
 * 10.00.00_example_top.sv.  This top-level file includes all of the
 * example files in chapter 10.
 *
 * Author: Lee Moore, Stuart Sutherland
 *
 * (c) Copyright 2003, Sutherland HDL, Inc. *** ALL RIGHTS RESERVED ***
 * www.sutherland-hdl.com
 *
 * This example is based on an example from Janick Bergeron's
 * Verification Guild[1].  The original example is a non-synthesizable
 * behavioral model written in Verilog-1995 of a quad Asynchronous
 * Transfer Mode (ATM) user-to-network interface and forwarding node.
 * This example modifies the original code to be synthesizable, using
 * SystemVerilog constructs.  Also, the model has been made to be
 * configurable, so that it can be easily scaled from a 4x4 quad switch
 * to a 16x16 switch, or any other desired configuration.  The example,
 * including a nominal test bench, is partitioned into 8 files,
 * numbered 10.xx.xx_example_10-1.sv through 10-8.sv (where xx
 * represents section and subsection numbers in the book "SystemVerilog
 * for Design" (first edition).  The file 10.00.00_example_top.sv
 * includes all of the other files.  Simulation only needs to be
 * invoked on this one file.  Conditional compilation switches (`ifdef)
 * is used to compile the examples for simulation or for synthesis.
 *
 * [1] The Verification Guild is an independent e-mail newsletter and
 * moderated discussion forum on hardware verification.  Information on
 * the original Verification Guild example can be found at
 * www.janick.bergeron.com/guild/project.html.
 *
 * Used with permission in the book, "SystemVerilog for Design"
 *  By Stuart Sutherland, Simon Davidmann, and Peter Flake.
 *  Book copyright: 2003, Kluwer Academic Publishers, Norwell, MA, USA
 *  www.wkap.il, ISBN: 0-4020-7530-8
 *
 * Revision History:
 *   1.00 15 Dec 2003 -- original code, as included in book
 *   1.01 10 Jul 2004 -- cleaned up comments, added expected results
 *                       to output messages
 *   1.10 21 Jul 2004 -- corrected errata as printed in the book
 *                       "SystemVerilog for Design" (first edition) and
 *                       to bring the example into conformance with the
 *                       final Accellera SystemVerilog 3.1a standard
 *                       (for a description of changes, see the file
 *                       "errata_SV-Design-book_26-Jul-2004.txt")
 *
 * Caveat: Expected results displayed for this code example are based
 * on an interpretation of the SystemVerilog 3.1 standard by the code
 * author or authors.  At the time of writing, official SystemVerilog
 * validation suites were not available to validate the example.
 *
 * RIGHT TO USE: This code example, or any portion thereof, may be
 * used and distributed without restriction, provided that this entire
 * comment block is included with the example.
 *
 * DISCLAIMER: THIS CODE EXAMPLE IS PROVIDED "AS IS" WITHOUT WARRANTY
 * OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED
 * TO WARRANTIES OF MERCHANTABILITY, FITNESS OR CORRECTNESS. IN NO
 * EVENT SHALL THE AUTHOR OR AUTHORS BE LIABLE FOR ANY DAMAGES,
 * INCLUDING INCIDENTAL OR CONSEQUENTIAL DAMAGES, ARISING OUT OF THE
 * USE OF THIS CODE.
 *********************************************************************/

`include "10.00.00_definitions.sv"  // include external definitions

interface CPU;
  logic        BusMode;
  logic [11:0] Addr;
  logic        Sel;
  CellCfgType  DataIn;
  CellCfgType  DataOut;
  logic        Rd_DS;
  logic        Wr_RW;
  logic        Rdy_Dtack;

  modport Peripheral (
    input  BusMode, Addr, Sel, DataIn, Rd_DS, Wr_RW,
    output DataOut, Rdy_Dtack
  );

  `ifndef SYNTHESIS // synthesis ignores this code
    CPUMethod Method ();  // interface with testing methods
  `endif
endinterface

interface LookupTable;
  parameter int  Asize  = 8;
  parameter int  Arange = 1<<Asize;
  parameter type dType  = bit;

  dType Mem [0:Arange-1];

  // Function to perform write
  function void write (input [Asize-1:0] addr,
                       input dType data );
    Mem[addr] = data;
  endfunction

  // Function to perform read
  function dType read (input bit [Asize-1:0] addr);
    return (Mem[addr]);
  endfunction
endinterface