watch.fit

2个按键的跑表

-- MAX+plus II Compiler Fit File      
-- Version 10.23 07/09/2003           
-- Compiled: 12/12/2008 19:52:41      

-- Copyright (C) 1988-2003 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "watch"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 2      ;
    "reset"                        : INPUT_PIN  = 7      ;
    "start"                        : INPUT_PIN  = 8      ;
    "mic_00"                       : OUTPUT_PIN = 27     ;
    "mic_01"                       : OUTPUT_PIN = 28     ;
    "mic_02"                       : OUTPUT_PIN = 29     ;
    "mic_03"                       : OUTPUT_PIN = 30     ;
    "mic_10"                       : OUTPUT_PIN = 35     ;
    "mic_11"                       : OUTPUT_PIN = 36     ;
    "mic_12"                       : OUTPUT_PIN = 37     ;
    "mic_13"                       : OUTPUT_PIN = 38     ;
    "min_00"                       : OUTPUT_PIN = 54     ;
    "min_01"                       : OUTPUT_PIN = 58     ;
    "min_02"                       : OUTPUT_PIN = 59     ;
    "min_03"                       : OUTPUT_PIN = 60     ;
    "min_10"                       : OUTPUT_PIN = 61     ;
    "min_11"                       : OUTPUT_PIN = 62     ;
    "min_12"                       : OUTPUT_PIN = 64     ;
    "min_13"                       : OUTPUT_PIN = 65     ;
    "sec_00"                       : OUTPUT_PIN = 39     ;
    "sec_01"                       : OUTPUT_PIN = 47     ;
    "sec_02"                       : OUTPUT_PIN = 48     ;
    "sec_03"                       : OUTPUT_PIN = 49     ;
    "sec_10"                       : OUTPUT_PIN = 50     ;
    "sec_11"                       : OUTPUT_PIN = 51     ;
    "sec_12"                       : OUTPUT_PIN = 52     ;
    "sec_13"                       : OUTPUT_PIN = 53     ;
    "|LPM_ADD_SUB:295|addcore:adder|:59" : LOCATION   = LC8_C15;
    "|LPM_ADD_SUB:295|addcore:adder|:68" : LOCATION   = LC2_C15;
    "|LPM_ADD_SUB:354|addcore:adder|:55" : LOCATION   = LC7_C7 ;
    "|LPM_ADD_SUB:413|addcore:adder|:69" : LOCATION   = LC7_C13;
    "|LPM_ADD_SUB:472|addcore:adder|:55" : LOCATION   = LC3_C19;
    "|LPM_ADD_SUB:531|addcore:adder|:55" : LOCATION   = LC2_C21;
    "|LPM_ADD_SUB:590|addcore:adder|:55" : LOCATION   = LC2_C24;
    "start~1"                      : LOCATION   = LC3_C24;
    "start~2"                      : LOCATION   = LC4_C24;
    "start~3"                      : LOCATION   = LC5_C22;
    "start~4"                      : LOCATION   = LC3_C21;
    "start~5"                      : LOCATION   = LC7_C21;
    "start~6"                      : LOCATION   = LC4_C17;
    "start~7"                      : LOCATION   = LC4_C19;
    "start~8"                      : LOCATION   = LC5_C19;
    "start~9"                      : LOCATION   = LC5_C13;
    "start~10"                     : LOCATION   = LC6_C13;
    "start~11"                     : LOCATION   = LC4_C13;
    ":28"                          : LOCATION   = LC7_C15;  -- mic_003
    ":29"                          : LOCATION   = LC5_C15;  -- mic_002
    ":30"                          : LOCATION   = LC3_C15;  -- mic_001
    ":31"                          : LOCATION   = LC1_C15;  -- mic_000
    ":32"                          : LOCATION   = LC1_C10;  -- mic_113
    ":33"                          : LOCATION   = LC4_C10;  -- mic_112
    ":34"                          : LOCATION   = LC4_C7 ;  -- mic_111
    ":35"                          : LOCATION   = LC5_C5 ;  -- mic_110
    ":36"                          : LOCATION   = LC4_C15;  -- sec_003
    ":37"                          : LOCATION   = LC3_C16;  -- sec_002
    ":38"                          : LOCATION   = LC8_C13;  -- sec_001
    ":39"                          : LOCATION   = LC4_C12;  -- sec_000
    ":40"                          : LOCATION   = LC2_C19;  -- sec_113
    ":41"                          : LOCATION   = LC8_C19;  -- sec_112
    ":42"                          : LOCATION   = LC6_C17;  -- sec_111
    ":43"                          : LOCATION   = LC1_C17;  -- sec_110
    ":44"                          : LOCATION   = LC4_C21;  -- min_003
    ":45"                          : LOCATION   = LC5_C21;  -- min_002
    ":46"                          : LOCATION   = LC7_C22;  -- min_001
    ":47"                          : LOCATION   = LC6_C22;  -- min_000
    ":48"                          : LOCATION   = LC8_C24;  -- min_113
    ":49"                          : LOCATION   = LC6_C24;  -- min_112
    ":50"                          : LOCATION   = LC1_C22;  -- min_111
    ":51"                          : LOCATION   = LC3_C22;  -- min_110
    ":308"                         : LOCATION   = LC6_C15;
    ":367"                         : LOCATION   = LC1_C7 ;
    ":426"                         : LOCATION   = LC2_C13;
    ":485"                         : LOCATION   = LC1_C19;
    ":544"                         : LOCATION   = LC1_C21;
    "~603~1"                       : LOCATION   = LC2_C22;
    "~704~1"                       : LOCATION   = LC1_C24;
    "~770~1"                       : LOCATION   = LC6_C21;
    "~864~1"                       : LOCATION   = LC3_C17;
    ":985"                         : LOCATION   = LC3_C13;
    ":1136"                        : LOCATION   = LC2_C7 ;
    "~1136~1"                      : LOCATION   = LC5_C7 ;
    ":1142"                        : LOCATION   = LC3_C7 ;
    ":1148"                        : LOCATION   = LC6_C7 ;
    "~1345~1"                      : LOCATION   = LC1_C13;
    "~1351~1"                      : LOCATION   = LC8_C10;
    "~1357~1"                      : LOCATION   = LC6_C19;
    "~1369~1"                      : LOCATION   = LC5_C17;
    "~1375~1"                      : LOCATION   = LC8_C17;
    "~1381~1"                      : LOCATION   = LC8_C21;
    "~1393~1"                      : LOCATION   = LC8_C22;
    "~1399~1"                      : LOCATION   = LC2_C17;
    "~1405~1"                      : LOCATION   = LC7_C24;
    "~1417~1"                      : LOCATION   = LC4_C22;