test1.ant

来自「xilinx环境下开发vhdl语言串行接口设计」· ANT 代码 · 共 101 行

-- E:\AA
-- VHDL Annotation Test Bench created by
-- HDL Bencher 6.1i
-- Fri Oct 31 13:43:39 2008

LIBRARY IEEE;
USE IEEE.STD_LOGIC_1164.ALL;
USE IEEE.STD_LOGIC_ARITH.ALL;
USE IEEE.STD_LOGIC_UNSIGNED.ALL;
USE IEEE.STD_LOGIC_TEXTIO.ALL;
USE STD.TEXTIO.ALL;

ENTITY test1 IS
END test1;

ARCHITECTURE testbench_arch OF test1 IS
-- If you get a compiler error on the following line,
-- from the menu do Options->Configuration select VHDL 87
FILE RESULTS: TEXT OPEN WRITE_MODE IS "e:\aa\test1.ano";
	COMPONENT bps
		PORT (
			clk : In  std_logic;
			enclk : In  std_logic;
			clktr : Out  std_logic
		);
	END COMPONENT;

	SIGNAL clk : std_logic;
	SIGNAL enclk : std_logic;
	SIGNAL clktr : std_logic;

BEGIN
	UUT : bps
	PORT MAP (
		clk => clk,
		enclk => enclk,
		clktr => clktr
	);

	PROCESS -- clock process for clk,
		VARIABLE TX_TIME : INTEGER :=0;

		PROCEDURE ANNOTATE_clktr(
			TX_TIME : INTEGER
		) IS
			VARIABLE TX_STR : String(1 to 4096);
			VARIABLE TX_LOC : LINE;
		BEGIN
			STD.TEXTIO.write(TX_LOC,string'("Annotate["));
			STD.TEXTIO.write(TX_LOC, TX_TIME);
			STD.TEXTIO.write(TX_LOC,string'(",clktr,"));
			IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, clktr);
			STD.TEXTIO.write(TX_LOC, string'("]"));
			TX_STR(TX_LOC.all'range) := TX_LOC.all;
			STD.TEXTIO.writeline(results, TX_LOC);
			STD.TEXTIO.Deallocate(TX_LOC);
		END;

	BEGIN
		CLOCK_LOOP : LOOP
		clk <= transport '0';
		WAIT FOR 10 ns;
		TX_TIME := TX_TIME + 10;
		clk <= transport '1';
		WAIT FOR 10 ns;
		TX_TIME := TX_TIME + 10;
		ANNOTATE_clktr(TX_TIME);
		WAIT FOR 40 ns;
		TX_TIME := TX_TIME + 40;
		clk <= transport '0';
		WAIT FOR 40 ns;
		TX_TIME := TX_TIME + 40;
		END LOOP CLOCK_LOOP;
	END PROCESS;

	PROCESS   -- Process for clk
		VARIABLE TX_OUT : LINE;

		BEGIN
		-- --------------------
		enclk <= transport '0';
		-- --------------------
		WAIT FOR 100 ns; -- Time=100 ns
		enclk <= transport '1';
		-- --------------------
		WAIT FOR 2000 ns; -- Time=2100 ns
		-- --------------------

		STD.TEXTIO.write(TX_OUT, string'("Total[]"));
		STD.TEXTIO.writeline(results, TX_OUT);
		ASSERT (FALSE) REPORT
			"Success! Simulation for annotation completed"
			SEVERITY FAILURE;
	END PROCESS;
END testbench_arch;

CONFIGURATION bps_cfg OF test1 IS
	FOR testbench_arch
	END FOR;
END bps_cfg;