bps.syr

xilinx环境下开发vhdl语言串行接口设计

Release 6.2i - xst G.28
Copyright (c) 1995-2004 Xilinx, Inc.  All rights reserved.
--> Parameter TMPDIR set to __projnav
CPU : 0.00 / 0.26 s | Elapsed : 0.00 / 0.00 s
 
--> Parameter xsthdpdir set to ./xst
CPU : 0.00 / 0.26 s | Elapsed : 0.00 / 0.00 s
 
--> Reading design: bps.prj

TABLE OF CONTENTS
  1) Synthesis Options Summary
  2) HDL Compilation
  3) HDL Analysis
  4) HDL Synthesis
  5) Advanced HDL Synthesis
     5.1) HDL Synthesis Report
  6) Low Level Synthesis
  7) Final Report
     7.1) Device utilization summary
     7.2) TIMING REPORT


=========================================================================
*                      Synthesis Options Summary                        *
=========================================================================
---- Source Parameters
Input File Name                    : bps.prj
Input Format                       : mixed
Ignore Synthesis Constraint File   : NO
Verilog Include Directory          : 

---- Target Parameters
Output File Name                   : bps
Output Format                      : NGC
Target Device                      : xc2v2000-4-bf957

---- Source Options
Top Module Name                    : bps
Automatic FSM Extraction           : YES
FSM Encoding Algorithm             : Auto
FSM Style                          : lut
RAM Extraction                     : Yes
RAM Style                          : Auto
ROM Extraction                     : Yes
ROM Style                          : Auto
Mux Extraction                     : YES
Mux Style                          : Auto
Decoder Extraction                 : YES
Priority Encoder Extraction        : YES
Shift Register Extraction          : YES
Logical Shifter Extraction         : YES
XOR Collapsing                     : YES
Resource Sharing                   : YES
Multiplier Style                   : auto
Automatic Register Balancing       : No

---- Target Options
Add IO Buffers                     : YES
Global Maximum Fanout              : 500
Add Generic Clock Buffer(BUFG)     : 0
Register Duplication               : YES
Equivalent register Removal        : YES
Slice Packing                      : YES
Pack IO Registers into IOBs        : auto

---- General Options
Optimization Goal                  : Speed
Optimization Effort                : 1
Keep Hierarchy                     : NO
Global Optimization                : AllClockNets
RTL Output                         : Yes
Write Timing Constraints           : NO
Hierarchy Separator                : _
Bus Delimiter                      : <>
Case Specifier                     : maintain
Slice Utilization Ratio            : 100
Slice Utilization Ratio Delta      : 5

---- Other Options
lso                                : bps.lso
Read Cores                         : YES
cross_clock_analysis               : NO
verilog2001                        : YES
Optimize Instantiated Primitives   : NO
tristate2logic                     : No

=========================================================================


=========================================================================
*                          HDL Compilation                              *
=========================================================================
Compiling vhdl file F:/aa/bps.vhdl in Library work.
Entity <bps> (Architecture <main>) compiled.

=========================================================================
*                            HDL Analysis                               *
=========================================================================
Analyzing Entity <bps> (Architecture <main>).
Entity <bps> analyzed. Unit <bps> generated.


=========================================================================
*                           HDL Synthesis                               *
=========================================================================

Synthesizing Unit <bps>.
    Related source file is F:/aa/bps.vhdl.
    Found 1-bit register for signal <clktr>.
    Found 8-bit up counter for signal <count>.
    Found 1-bit register for signal <temp>.
    Found 1 1-bit 2-to-1 multiplexers.
    Summary:
	inferred   1 Counter(s).
	inferred   1 D-type flip-flop(s).
	inferred   1 Multiplexer(s).
Unit <bps> synthesized.


=========================================================================
*                       Advanced HDL Synthesis                          *
=========================================================================

Advanced RAM inference ...
Advanced multiplier inference ...
Dynamic shift register inference ...

=========================================================================
HDL Synthesis Report

Macro Statistics
# Counters                         : 1
 8-bit up counter                  : 1
# Registers                        : 2
 1-bit register                    : 2
# Multiplexers                     : 1
 1-bit 2-to-1 multiplexer          : 1

=========================================================================

=========================================================================
*                         Low Level Synthesis                           *
=========================================================================

Optimizing unit <bps> ...
Loading device for application Xst from file '2v2000.nph' in environment C:/Xilinx.

Mapping all equations...
Building and optimizing final netlist ...
Found area constraint ratio of 100 (+ 5) on block bps, actual ratio is 0.

=========================================================================
*                            Final Report                               *
=========================================================================
Final Results
RTL Top Level Output File Name     : bps.ngr
Top Level Output File Name         : bps
Output Format                      : NGC
Optimization Goal                  : Speed
Keep Hierarchy                     : NO

Design Statistics
# IOs                              : 3

Macro Statistics :
# Registers                        : 1
#      1-bit register              : 1
# Counters                         : 1
#      8-bit up counter            : 1
# Multiplexers                     : 1
#      2-to-1 multiplexer          : 1

Cell Usage :
# BELS                             : 27
#      GND                         : 1
#      LUT1                        : 2
#      LUT2                        : 3
#      LUT2_D                      : 1
#      LUT3_L                      : 1
#      LUT4                        : 2
#      MUXCY                       : 8
#      VCC                         : 1
#      XORCY                       : 8
# FlipFlops/Latches                : 10
#      FDCE                        : 1
#      FDCPE                       : 9
# IO Buffers                       : 3
#      IBUF                        : 2
#      OBUF                        : 1
=========================================================================

Device utilization summary:
---------------------------

Selected Device : 2v2000bf957-4 

 Number of Slices:                       9  out of  10752     0%  
 Number of Slice Flip Flops:            10  out of  21504     0%  
 Number of 4 input LUTs:                 9  out of  21504     0%  
 Number of bonded IOBs:                  3  out of    624     0%  


=========================================================================
TIMING REPORT

NOTE: THESE TIMING NUMBERS ARE ONLY A SYNTHESIS ESTIMATE.
      FOR ACCURATE TIMING INFORMATION PLEASE REFER TO THE TRACE REPORT
      GENERATED AFTER PLACE-and-ROUTE.

Clock Information:
------------------
-----------------------------------+------------------------+-------+
Clock Signal                       | Clock buffer(FF name)  | Load  |
-----------------------------------+------------------------+-------+
clk                                | IBUF                   | 10    |
-----------------------------------+------------------------+-------+

Timing Summary:
---------------
Speed Grade: -4

   Minimum period: 5.162ns (Maximum Frequency: 193.723MHz)
   Minimum input arrival time before clock: 2.381ns
   Maximum output required time after clock: 5.446ns
   Maximum combinational path delay: No path found

Timing Detail:
--------------
All values displayed in nanoseconds (ns)

-------------------------------------------------------------------------
Timing constraint: Default period analysis for Clock 'clk'
Delay:               5.162ns (Levels of Logic = 11)
  Source:            count_0 (FF)
  Destination:       count_7 (FF)
  Source Clock:      clk rising
  Destination Clock: clk rising

  Data Path: count_0 to count_7
                                Gate     Net
    Cell:in->out      fanout   Delay   Delay  Logical Name (Net Name)
    ----------------------------------------  ------------
     FDCPE:C->Q            2   0.568   0.701  count_0 (count_0)
     LUT4:I0->O            2   0.439   0.701  _n000111 (CHOICE33)
     LUT2_D:I0->LO         1   0.439   0.000  _n000125 (N688)
     MUXCY:S->O            1   0.298   0.000  count_inst_cy_0 (count_inst_cy_0)
     MUXCY:CI->O           1   0.053   0.000  count_inst_cy_1 (count_inst_cy_1)
     MUXCY:CI->O           1   0.053   0.000  count_inst_cy_2 (count_inst_cy_2)
     MUXCY:CI->O           1   0.053   0.000  count_inst_cy_3 (count_inst_cy_3)
     MUXCY:CI->O           1   0.053   0.000  count_inst_cy_4 (count_inst_cy_4)
     MUXCY:CI->O           1   0.053   0.000  count_inst_cy_5 (count_inst_cy_5)
     MUXCY:CI->O           1   0.053   0.000  count_inst_cy_6 (count_inst_cy_6)
     MUXCY:CI->O           0   0.053   0.000  count_inst_cy_7 (count_inst_cy_7)
     XORCY:CI->O           1   1.274   0.000  count_inst_sum_7 (count_inst_sum_7)
     FDCPE:D                   0.370          count_7
    ----------------------------------------
    Total                      5.162ns (3.759ns logic, 1.403ns route)
                                       (72.8% logic, 27.2% route)

-------------------------------------------------------------------------
Timing constraint: Default OFFSET IN BEFORE for Clock 'clk'
Offset:              2.381ns (Levels of Logic = 2)
  Source:            enclk (PAD)
  Destination:       clktr (FF)
  Destination Clock: clk rising

  Data Path: enclk to clktr
                                Gate     Net
    Cell:in->out      fanout   Delay   Delay  Logical Name (Net Name)
    ----------------------------------------  ------------
     IBUF:I->O             4   0.825   0.747  enclk_IBUF (enclk_IBUF)
     LUT2:I0->O            1   0.439   0.000  Mmux__n0003_Result1 (_n0003)
     FDCPE:D                   0.370          clktr
    ----------------------------------------
    Total                      2.381ns (1.634ns logic, 0.747ns route)
                                       (68.6% logic, 31.4% route)

-------------------------------------------------------------------------
Timing constraint: Default OFFSET OUT AFTER for Clock 'clk'
Offset:              5.446ns (Levels of Logic = 1)
  Source:            clktr (FF)
  Destination:       clktr (PAD)
  Source Clock:      clk rising

  Data Path: clktr to clktr
                                Gate     Net
    Cell:in->out      fanout   Delay   Delay  Logical Name (Net Name)
    ----------------------------------------  ------------
     FDCPE:C->Q            1   0.568   0.517  clktr (clktr_OBUF)
     OBUF:I->O                 4.361          clktr_OBUF (clktr)
    ----------------------------------------
    Total                      5.446ns (4.929ns logic, 0.517ns route)
                                       (90.5% logic, 9.5% route)

=========================================================================
CPU : 3.47 / 4.00 s | Elapsed : 3.00 / 4.00 s
 
--> 

Total memory usage is 90296 kilobytes