rs232_rec5.fit.qmsg

VHDL语言实现的穿行通讯

{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Extra Info: Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" {  } {  } 1 0 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "" 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "00:00:00 " "Info: Finished register packing: elapsed time is 00:00:00" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "Extra Info: No registers were packed into other blocks" {  } {  } 1 0 "No registers were packed into other blocks" 0 0 "" 0}  } {  } 0 0 "Finished register packing: elapsed time is %1!s!" 0 0 "" 0}
{ "Warning" "WCUT_CUT_UNATTACHED_ASGN" "" "Warning: Ignored locations or region assignments to the following nodes" { { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "clk " "Warning: Node \"clk\" is assigned to location or region, but does not exist in design" {  } { { "e:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "clk" } } } }  } 0 0 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "" 0} { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "pin_test_baud8x_p " "Warning: Node \"pin_test_baud8x_p\" is assigned to location or region, but does not exist in design" {  } { { "e:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "pin_test_baud8x_p" } } } }  } 0 0 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "" 0} { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "rst " "Warning: Node \"rst\" is assigned to location or region, but does not exist in design" {  } { { "e:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "rst" } } } }  } 0 0 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "" 0} { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "rxd " "Warning: Node \"rxd\" is assigned to location or region, but does not exist in design" {  } { { "e:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "rxd" } } } }  } 0 0 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "" 0} { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "test_baud8x_p " "Warning: Node \"test_baud8x_p\" is assigned to location or region, but does not exist in design" {  } { { "e:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "test_baud8x_p" } } } }  } 0 0 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "" 0} { "Warning" "WCUT_CUT_UNATTACHED_ASGN_SUB" "txd " "Warning: Node \"txd\" is assigned to location or region, but does not exist in design" {  } { { "e:/altera/72/quartus/bin/Assignment Editor.qase" "" { Assignment "e:/altera/72/quartus/bin/Assignment Editor.qase" 1 { { 0 "txd" } } } }  } 0 0 "Node \"%1!s!\" is assigned to location or region, but does not exist in design" 0 0 "" 0}  } {  } 0 0 "Ignored locations or region assignments to the following nodes" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "4.854 ns register register " "Info: Estimated most critical path is register to register delay of 4.854 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns rs232_rec2:inst1\|state_rec\[2\] 1 REG LAB_X21_Y5 5 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X21_Y5; Fanout = 5; REG Node = 'rs232_rec2:inst1\|state_rec\[2\]'" {  } { { "e:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { rs232_rec2:inst1|state_rec[2] } "NODE_NAME" } } { "rs232_rec2.vhd" "" { Text "D:/fpga_dev/rs232_rec5/rs232_rec2.vhd" 211 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.511 ns) + CELL(0.370 ns) 0.881 ns rs232_rec2:inst1\|Equal3~41 2 COMB LAB_X21_Y5 6 " "Info: 2: + IC(0.511 ns) + CELL(0.370 ns) = 0.881 ns; Loc. = LAB_X21_Y5; Fanout = 6; COMB Node = 'rs232_rec2:inst1\|Equal3~41'" {  } { { "e:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "0.881 ns" { rs232_rec2:inst1|state_rec[2] rs232_rec2:inst1|Equal3~41 } "NODE_NAME" } } { "e:/altera/72/quartus/libraries/vhdl/synopsys/syn_arit.vhd" "" { Text "e:/altera/72/quartus/libraries/vhdl/synopsys/syn_arit.vhd" 1805 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.876 ns) + CELL(0.651 ns) 2.408 ns rs232_rec2:inst1\|state_rec~1337 3 COMB LAB_X20_Y4 2 " "Info: 3: + IC(0.876 ns) + CELL(0.651 ns) = 2.408 ns; Loc. = LAB_X20_Y4; Fanout = 2; COMB Node = 'rs232_rec2:inst1\|state_rec~1337'" {  } { { "e:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "1.527 ns" { rs232_rec2:inst1|Equal3~41 rs232_rec2:inst1|state_rec~1337 } "NODE_NAME" } } { "rs232_rec2.vhd" "" { Text "D:/fpga_dev/rs232_rec5/rs232_rec2.vhd" 38 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(1.157 ns) + CELL(0.370 ns) 3.935 ns rs232_rec2:inst1\|state_rec~1340 4 COMB LAB_X21_Y5 1 " "Info: 4: + IC(1.157 ns) + CELL(0.370 ns) = 3.935 ns; Loc. = LAB_X21_Y5; Fanout = 1; COMB Node = 'rs232_rec2:inst1\|state_rec~1340'" {  } { { "e:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "1.527 ns" { rs232_rec2:inst1|state_rec~1337 rs232_rec2:inst1|state_rec~1340 } "NODE_NAME" } } { "rs232_rec2.vhd" "" { Text "D:/fpga_dev/rs232_rec5/rs232_rec2.vhd" 38 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.160 ns) + CELL(0.651 ns) 4.746 ns rs232_rec2:inst1\|state_rec~1343 5 COMB LAB_X21_Y5 1 " "Info: 5: + IC(0.160 ns) + CELL(0.651 ns) = 4.746 ns; Loc. = LAB_X21_Y5; Fanout = 1; COMB Node = 'rs232_rec2:inst1\|state_rec~1343'" {  } { { "e:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "0.811 ns" { rs232_rec2:inst1|state_rec~1340 rs232_rec2:inst1|state_rec~1343 } "NODE_NAME" } } { "rs232_rec2.vhd" "" { Text "D:/fpga_dev/rs232_rec5/rs232_rec2.vhd" 38 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.108 ns) 4.854 ns rs232_rec2:inst1\|state_rec\[0\] 6 REG LAB_X21_Y5 11 " "Info: 6: + IC(0.000 ns) + CELL(0.108 ns) = 4.854 ns; Loc. = LAB_X21_Y5; Fanout = 11; REG Node = 'rs232_rec2:inst1\|state_rec\[0\]'" {  } { { "e:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "0.108 ns" { rs232_rec2:inst1|state_rec~1343 rs232_rec2:inst1|state_rec[0] } "NODE_NAME" } } { "rs232_rec2.vhd" "" { Text "D:/fpga_dev/rs232_rec5/rs232_rec2.vhd" 211 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "2.150 ns ( 44.29 % ) " "Info: Total cell delay = 2.150 ns ( 44.29 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0 "" 0} { "Info" "ITDB_TOTAL_IC_DELAY" "2.704 ns ( 55.71 % ) " "Info: Total interconnect delay = 2.704 ns ( 55.71 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0 "" 0}  } { { "e:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "e:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "4.854 ns" { rs232_rec2:inst1|state_rec[2] rs232_rec2:inst1|Equal3~41 rs232_rec2:inst1|state_rec~1337 rs232_rec2:inst1|state_rec~1340 rs232_rec2:inst1|state_rec~1343 rs232_rec2:inst1|state_rec[0] } "NODE_NAME" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Info: Average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X14_Y0 X28_Y14 " "Info: Peak interconnect usage is 0% of the available device resources in the region that extends from location X14_Y0 to location X28_Y14" {  } {  } 0 0 "Peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "" 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0 "" 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0 "" 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0 "" 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0 "" 0}
{ "Warning" "WDAT_NO_LOADING_SPECIFIED_ONE_OR_MORE_PINS" "12 " "Warning: Found 12 output pins without output pin load capacitance assignment" { { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "pin_txd 0 " "Info: Pin \"pin_txd\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "pin_p 0 " "Info: Pin \"pin_p\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "pin_baud 0 " "Info: Pin \"pin_baud\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "pin_baud_rec 0 " "Info: Pin \"pin_baud_rec\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[7\] 0 " "Info: Pin \"data\[7\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[6\] 0 " "Info: Pin \"data\[6\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[5\] 0 " "Info: Pin \"data\[5\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[4\] 0 " "Info: Pin \"data\[4\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[3\] 0 " "Info: Pin \"data\[3\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[2\] 0 " "Info: Pin \"data\[2\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[1\] 0 " "Info: Pin \"data\[1\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0} { "Info" "IDAT_NO_LOADING_SPECIFIED_ON_PIN" "data\[0\] 0 " "Info: Pin \"data\[0\]\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0 "" 0}  } {  } 0 0 "Found %1!d! output pins without output pin load capacitance assignment" 0 0 "" 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0 "" 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "D:/fpga_dev/rs232_rec5/rs232_rec5.fit.smsg " "Info: Generated suppressed messages file D:/fpga_dev/rs232_rec5/rs232_rec5.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0 "" 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 10 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 10 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "173 " "Info: Allocated 173 megabytes of memory during processing" {  } {  } 0 0 "Allocated %1!s! megabytes of memory during processing" 0 0 "" 0} { "Info" "IQEXE_END_BANNER_TIME" "Mon Mar 31 15:42:18 2008 " "Info: Processing ended: Mon Mar 31 15:42:18 2008" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "" 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:13 " "Info: Elapsed time: 00:00:13" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "" 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "" 0}