📄 zt.tan.rpt
字号:
Classic Timing Analyzer report for ZT
Wed Nov 28 12:29:04 2007
Quartus II Version 7.1 Build 156 04/30/2007 SJ Full Version
---------------------
; Table of Contents ;
---------------------
1. Legal Notice
2. Timing Analyzer Summary
3. Timing Analyzer Settings
4. Clock Settings Summary
5. Clock Setup: 'GONG'
6. tco
7. Timing Analyzer Messages
----------------
; Legal Notice ;
----------------
Copyright (C) 1991-2007 Altera Corporation
Your use of Altera Corporation's design tools, logic functions
and other software and tools, and its AMPP partner logic
functions, and any output files from any of the foregoing
(including device programming or simulation files), and any
associated documentation or information are expressly subject
to the terms and conditions of the Altera Program License
Subscription Agreement, Altera MegaCore Function License
Agreement, or other applicable license agreement, including,
without limitation, that your use is for the sole purpose of
programming logic devices manufactured by Altera and sold by
Altera or its authorized distributors. Please refer to the
applicable agreement for further details.
+-----------------------------------------------------------------------------------------------------------------------------------------------------------------+
; Timing Analyzer Summary ;
+------------------------------+-------+---------------+------------------------------------------------+------+-----------+------------+----------+--------------+
; Type ; Slack ; Required Time ; Actual Time ; From ; To ; From Clock ; To Clock ; Failed Paths ;
+------------------------------+-------+---------------+------------------------------------------------+------+-----------+------------+----------+--------------+
; Worst-case tco ; N/A ; None ; 12.400 ns ; Z[0] ; ZHUANG[0] ; GONG ; -- ; 0 ;
; Clock Setup: 'GONG' ; N/A ; None ; Restricted to 200.00 MHz ( period = 5.000 ns ) ; Z[0] ; Z[1] ; GONG ; GONG ; 0 ;
; Total number of failed paths ; ; ; ; ; ; ; ; 0 ;
+------------------------------+-------+---------------+------------------------------------------------+------+-----------+------------+----------+--------------+
+------------------------------------------------------------------------------------------------------+
; Timing Analyzer Settings ;
+-------------------------------------------------------+--------------------+------+----+-------------+
; Option ; Setting ; From ; To ; Entity Name ;
+-------------------------------------------------------+--------------------+------+----+-------------+
; Device Name ; EP1K100QC208-3 ; ; ; ;
; Timing Models ; Final ; ; ; ;
; Default hold multicycle ; Same as Multicycle ; ; ; ;
; Cut paths between unrelated clock domains ; On ; ; ; ;
; Cut off read during write signal paths ; On ; ; ; ;
; Cut off feedback from I/O pins ; On ; ; ; ;
; Report Combined Fast/Slow Timing ; Off ; ; ; ;
; Ignore Clock Settings ; Off ; ; ; ;
; Analyze latches as synchronous elements ; On ; ; ; ;
; Enable Recovery/Removal analysis ; Off ; ; ; ;
; Enable Clock Latency ; Off ; ; ; ;
; Number of source nodes to report per destination node ; 10 ; ; ; ;
; Number of destination nodes to report ; 10 ; ; ; ;
; Number of paths to report ; 200 ; ; ; ;
; Report Minimum Timing Checks ; Off ; ; ; ;
; Use Fast Timing Models ; Off ; ; ; ;
; Report IO Paths Separately ; Off ; ; ; ;
+-------------------------------------------------------+--------------------+------+----+-------------+
+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
; Clock Settings Summary ;
+-----------------+--------------------+----------+------------------+---------------+--------------+----------+-----------------------+---------------------+--------+--------------+
; Clock Node Name ; Clock Setting Name ; Type ; Fmax Requirement ; Early Latency ; Late Latency ; Based on ; Multiply Base Fmax by ; Divide Base Fmax by ; Offset ; Phase offset ;
+-----------------+--------------------+----------+------------------+---------------+--------------+----------+-----------------------+---------------------+--------+--------------+
; GONG ; ; User Pin ; None ; 0.000 ns ; 0.000 ns ; -- ; N/A ; N/A ; N/A ; ;
+-----------------+--------------------+----------+------------------+---------------+--------------+----------+-----------------------+---------------------+--------+--------------+
+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
; Clock Setup: 'GONG' ;
+-------+------------------------------------------------+------+------+------------+----------+-----------------------------+---------------------------+-------------------------+
; Slack ; Actual fmax (period) ; From ; To ; From Clock ; To Clock ; Required Setup Relationship ; Required Longest P2P Time ; Actual Longest P2P Time ;
+-------+------------------------------------------------+------+------+------------+----------+-----------------------------+---------------------------+-------------------------+
; N/A ; Restricted to 200.00 MHz ( period = 5.000 ns ) ; Z[0] ; Z[2] ; GONG ; GONG ; None ; None ; 1.500 ns ;
; N/A ; Restricted to 200.00 MHz ( period = 5.000 ns ) ; Z[0] ; Z[1] ; GONG ; GONG ; None ; None ; 1.500 ns ;
; N/A ; Restricted to 200.00 MHz ( period = 5.000 ns ) ; Z[0] ; Z[0] ; GONG ; GONG ; None ; None ; 1.400 ns ;
; N/A ; Restricted to 200.00 MHz ( period = 5.000 ns ) ; Z[1] ; Z[2] ; GONG ; GONG ; None ; None ; 1.400 ns ;
; N/A ; Restricted to 200.00 MHz ( period = 5.000 ns ) ; Z[1] ; Z[1] ; GONG ; GONG ; None ; None ; 1.400 ns ;
; N/A ; Restricted to 200.00 MHz ( period = 5.000 ns ) ; Z[2] ; Z[0] ; GONG ; GONG ; None ; None ; 1.200 ns ;
; N/A ; Restricted to 200.00 MHz ( period = 5.000 ns ) ; Z[2] ; Z[2] ; GONG ; GONG ; None ; None ; 1.200 ns ;
; N/A ; Restricted to 200.00 MHz ( period = 5.000 ns ) ; Z[2] ; Z[1] ; GONG ; GONG ; None ; None ; 1.200 ns ;
+-------+------------------------------------------------+------+------+------------+----------+-----------------------------+---------------------------+-------------------------+
+-------------------------------------------------------------------+
; tco ;
+-------+--------------+------------+------+-----------+------------+
; Slack ; Required tco ; Actual tco ; From ; To ; From Clock ;
+-------+--------------+------------+------+-----------+------------+
; N/A ; None ; 12.400 ns ; Z[2] ; ZHUANG[2] ; GONG ;
; N/A ; None ; 12.400 ns ; Z[1] ; ZHUANG[1] ; GONG ;
; N/A ; None ; 12.400 ns ; Z[0] ; ZHUANG[0] ; GONG ;
+-------+--------------+------------+------+-----------+------------+
+--------------------------+
; Timing Analyzer Messages ;
+--------------------------+
Info: *******************************************************************
Info: Running Quartus II Classic Timing Analyzer
Info: Version 7.1 Build 156 04/30/2007 SJ Full Version
Info: Processing started: Wed Nov 28 12:29:04 2007
Info: Command: quartus_tan --read_settings_files=off --write_settings_files=off ZT -c ZT
Info: Started post-fitting delay annotation
Info: Delay annotation completed successfully
Warning: Found pins functioning as undefined clocks and/or memory enables
Info: Assuming node "GONG" is an undefined clock
Info: Clock "GONG" Internal fmax is restricted to 200.0 MHz between source register "Z[0]" and destination register "Z[2]"
Info: fmax restricted to Clock High delay (2.5 ns) plus Clock Low delay (2.5 ns) : restricted to 5.0 ns. Expand message to see actual delay path.
Info: + Longest register to register delay is 1.500 ns
Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LC1_A37; Fanout = 4; REG Node = 'Z[0]'
Info: 2: + IC(0.200 ns) + CELL(1.300 ns) = 1.500 ns; Loc. = LC3_A37; Fanout = 4; REG Node = 'Z[2]'
Info: Total cell delay = 1.300 ns ( 86.67 % )
Info: Total interconnect delay = 0.200 ns ( 13.33 % )
Info: - Smallest clock skew is 0.000 ns
Info: + Shortest clock path from clock "GONG" to destination register is 1.900 ns
Info: 1: + IC(0.000 ns) + CELL(0.500 ns) = 0.500 ns; Loc. = PIN_79; Fanout = 3; CLK Node = 'GONG'
Info: 2: + IC(1.400 ns) + CELL(0.000 ns) = 1.900 ns; Loc. = LC3_A37; Fanout = 4; REG Node = 'Z[2]'
Info: Total cell delay = 0.500 ns ( 26.32 % )
Info: Total interconnect delay = 1.400 ns ( 73.68 % )
Info: - Longest clock path from clock "GONG" to source register is 1.900 ns
Info: 1: + IC(0.000 ns) + CELL(0.500 ns) = 0.500 ns; Loc. = PIN_79; Fanout = 3; CLK Node = 'GONG'
Info: 2: + IC(1.400 ns) + CELL(0.000 ns) = 1.900 ns; Loc. = LC1_A37; Fanout = 4; REG Node = 'Z[0]'
Info: Total cell delay = 0.500 ns ( 26.32 % )
Info: Total interconnect delay = 1.400 ns ( 73.68 % )
Info: + Micro clock to output delay of source is 1.100 ns
Info: + Micro setup delay of destination is 0.700 ns
Info: tco from clock "GONG" to destination pin "ZHUANG[2]" through register "Z[2]" is 12.400 ns
Info: + Longest clock path from clock "GONG" to source register is 1.900 ns
Info: 1: + IC(0.000 ns) + CELL(0.500 ns) = 0.500 ns; Loc. = PIN_79; Fanout = 3; CLK Node = 'GONG'
Info: 2: + IC(1.400 ns) + CELL(0.000 ns) = 1.900 ns; Loc. = LC3_A37; Fanout = 4; REG Node = 'Z[2]'
Info: Total cell delay = 0.500 ns ( 26.32 % )
Info: Total interconnect delay = 1.400 ns ( 73.68 % )
Info: + Micro clock to output delay of source is 1.100 ns
Info: + Longest register to pin delay is 9.400 ns
Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LC3_A37; Fanout = 4; REG Node = 'Z[2]'
Info: 2: + IC(0.800 ns) + CELL(8.600 ns) = 9.400 ns; Loc. = PIN_10; Fanout = 0; PIN Node = 'ZHUANG[2]'
Info: Total cell delay = 8.600 ns ( 91.49 % )
Info: Total interconnect delay = 0.800 ns ( 8.51 % )
Info: Quartus II Classic Timing Analyzer was successful. 0 errors, 1 warning
Info: Allocated 114 megabytes of memory during processing
Info: Processing ended: Wed Nov 28 12:29:05 2007
Info: Elapsed time: 00:00:01
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -