segmain.vhd.bak

Verilog 经典实例

module seg78led(clk,reset_n,address,write_n,writedata,read_n,readdata,seg_data,seg_com);
input clk;
input reset_n;
//input chipselect;
input write_n;
input read_n;
input [2:0]address;
input [7:0]writedata;
output [7:0]readdata;
output [7:0]seg_data;
output [7:0]seg_com;

reg [7:0]outdata;
reg [7:0]datain[7:0];
reg [7:0]seg_com;
reg [7:0]seg_data;
reg [7:0]bcd_led;
reg [36:0]count;

assign readdata=outdata;
always @(posedge clk)
begin
	if(!reset_n)
	begin
		datain[0]<=8'b00000000;
		datain[1]<=8'b00000000;
		datain[2]<=8'b00000000;
		datain[3]<=8'b00000000;
		datain[4]<=8'b00000000;
		datain[5]<=8'b00000000;
		datain[6]<=8'b00000000;
		datain[7]<=8'b00000000;
	end
	else if(!read_n)
		begin
			outdata<=datain[address];
		end
		else if(!write_n)
		begin
			datain[address]<=writedata;
		end
end

always @(posedge clk)
begin
	count=count+1;
end

always @(count[14:12])
begin
	case(count[14:12])
		3'b000:
		    begin
		     bcd_led = datain[0];
		     seg_com  = 8'b1111_1110;
		    end
		3'b001:
		    begin
		     bcd_led=datain[1];
		     seg_com=8'b1111_1101;
		    end
		3'b010:
		    begin
		     bcd_led=datain[2];
		     seg_com=8'b1111_1011;
		    end
		3'b011:
		    begin
		     bcd_led=datain[3];
		     seg_com=8'b1111_0111;
		    end
		3'b100:
		    begin
		     bcd_led=datain[4];
		     seg_com=8'b1110_1111;
		    end
		3'b101:
		    begin
		     bcd_led=datain[5];
		     seg_com=8'b1101_1111;
		    end
		3'b110:
		    begin
		     bcd_led=datain[6];
		     seg_com=8'b1011_1111;
		    end
		3'b111:
		    begin
		     bcd_led=datain[7];
		     seg_com=8'b0111_1111;
		    end
	endcase

end

always @(seg_com)
begin
	case(bcd_led[3:0])
		4'h0:seg_data=8'hc0;
		4'h1:seg_data=8'hf9;
		4'h2:seg_data=8'ha4;
		4'h3:seg_data=8'hb0;
		4'h4:seg_data=8'h99;
		4'h5:seg_data=8'h92;
		4'h6:seg_data=8'h82;
		4'h7:seg_data=8'hf8;
		4'h8:seg_data=8'h80;
		4'h9:seg_data=8'h90;
		4'ha:seg_data=8'h88;
		4'hb:seg_data=8'h83;
		4'hc:seg_data=8'hc6;
		4'hd:seg_data=8'ha1;
		4'he:seg_data=8'h86;
		4'hf:seg_data=8'h8e;
	endcase
end

endmodule