📄 testlatch.tan.rpt
字号:
+------------------------------+-----------+----------------------------------+----------------------------------+--------------------------------------------+------------------------+------------+----------+--------------+
+-------------------------------------------------------------------------------------------------------+
; Timing Analyzer Settings ;
+-------------------------------------------------------+--------------------+------+-----+-------------+
; Option ; Setting ; From ; To ; Entity Name ;
+-------------------------------------------------------+--------------------+------+-----+-------------+
; Device Name ; EPM3064ATC44-10 ; ; ; ;
; Timing Models ; Final ; ; ; ;
; Number of source nodes to report per destination node ; 10 ; ; ; ;
; Number of destination nodes to report ; 10 ; ; ; ;
; Number of paths to report ; 200 ; ; ; ;
; Report Minumum Timing Checks ; Off ; ; ; ;
; Use Fast Timing Models ; Off ; ; ; ;
; Report IO Paths Separately ; Off ; ; ; ;
; Clock Analysis Only ; Off ; ; ; ;
; Default hold multicycle ; Same as Multicycle ; ; ; ;
; Cut paths between unrelated clock domains ; On ; ; ; ;
; Cut off read during write signal paths ; On ; ; ; ;
; Cut off clear and preset signal paths ; On ; ; ; ;
; Cut off feedback from I/O pins ; On ; ; ; ;
; fmax Requirement ; 25.0 MHz ; ; ; ;
; Ignore Clock Settings ; Off ; ; ; ;
; Analyze latches as synchronous elements ; Off ; ; ; ;
; Do Min/Max analysis using Rise/Fall delays ; Off ; ; ; ;
; Enable Recovery/Removal analysis ; Off ; ; ; ;
; Use Clock Latency for PLL offset ; Off ; ; ; ;
; Clock Settings ; mainclk ; ; CLK ; ;
+-------------------------------------------------------+--------------------+------+-----+-------------+
+--------------------------------------------------------------------------------------------------------------------------------------+
; Clock Settings Summary ;
+-----------------+--------------------+----------+------------------+----------+-----------------------+---------------------+--------+
; Clock Node Name ; Clock Setting Name ; Type ; Fmax Requirement ; Based on ; Multiply Base Fmax by ; Divide Base Fmax by ; Offset ;
+-----------------+--------------------+----------+------------------+----------+-----------------------+---------------------+--------+
; CLK ; mainclk ; User Pin ; 25.0 MHz ; NONE ; N/A ; N/A ; N/A ;
+-----------------+--------------------+----------+------------------+----------+-----------------------+---------------------+--------+
+-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
; Clock Setup: 'CLK' ;
+-----------------------------------------+-----------------------------------------------------+---------------------------------------------+---------------------------------------------+------------+----------+-----------------------------+---------------------------+-------------------------+
; Slack ; Actual fmax (period) ; From ; To ; From Clock ; To Clock ; Required Setup Relationship ; Required Longest P2P Time ; Actual Longest P2P Time ;
+-----------------------------------------+-----------------------------------------------------+---------------------------------------------+---------------------------------------------+------------+----------+-----------------------------+---------------------------+-------------------------+
; 28.900 ns ; 90.09 MHz ( period = 11.100 ns ) ; JTAGcore:inst4|SM~125 ; JTAGcore:inst4|SM~127 ; CLK ; CLK ; 40.000 ns ; 35.500 ns ; 6.600 ns ;
; 28.900 ns ; 90.09 MHz ( period = 11.100 ns ) ; JTAGcore:inst4|SM~127 ; JTAGcore:inst4|SM~127 ; CLK ; CLK ; 40.000 ns ; 35.500 ns ; 6.600 ns ;
; 28.900 ns ; 90.09 MHz ( period = 11.100 ns ) ; JTAGcore:inst4|SM~126 ; JTAGcore:inst4|SM~125 ; CLK ; CLK ; 40.000 ns ; 35.500 ns ; 6.600 ns ;
; 28.900 ns ; 90.09 MHz ( period = 11.100 ns ) ; JTAGcore:inst4|SM~125 ; JTAGcore:inst4|SM~125 ; CLK ; CLK ; 40.000 ns ; 35.500 ns ; 6.600 ns ;
; 28.900 ns ; 90.09 MHz ( period = 11.100 ns ) ; JTAGcore:inst4|SM~127 ; JTAGcore:inst4|SM~125 ; CLK ; CLK ; 40.000 ns ; 35.500 ns ; 6.600 ns ;
; 28.900 ns ; 90.09 MHz ( period = 11.100 ns ) ; JTAGcore:inst4|shiftout:shifter|rdy ; JTAGcore:inst4|SM~125 ; CLK ; CLK ; 40.000 ns ; 35.500 ns ; 6.600 ns ;
; 28.900 ns ; 90.09 MHz ( period = 11.100 ns ) ; JTAGcore:inst4|SM~126 ; JTAGcore:inst4|SM~126 ; CLK ; CLK ; 40.000 ns ; 35.500 ns ; 6.600 ns ;
; 28.900 ns ; 90.09 MHz ( period = 11.100 ns ) ; JTAGcore:inst4|SM~125 ; JTAGcore:inst4|SM~126 ; CLK ; CLK ; 40.000 ns ; 35.500 ns ; 6.600 ns ;
; 28.900 ns ; 90.09 MHz ( period = 11.100 ns ) ; JTAGcore:inst4|SM~127 ; JTAGcore:inst4|SM~126 ; CLK ; CLK ; 40.000 ns ; 35.500 ns ; 6.600 ns ;
; 28.900 ns ; 90.09 MHz ( period = 11.100 ns ) ; JTAGcore:inst4|shiftout:shifter|rdy ; JTAGcore:inst4|SM~126 ; CLK ; CLK ; 40.000 ns ; 35.500 ns ; 6.600 ns ;
; 28.900 ns ; 90.09 MHz ( period = 11.100 ns ) ; JTAGcore:inst4|SM~126 ; JTAGcore:inst4|RD ; CLK ; CLK ; 40.000 ns ; 35.500 ns ; 6.600 ns ;
; 28.900 ns ; 90.09 MHz ( period = 11.100 ns ) ; JTAGcore:inst4|SM~125 ; JTAGcore:inst4|RD ; CLK ; CLK ; 40.000 ns ; 35.500 ns ; 6.600 ns ;
; 28.900 ns ; 90.09 MHz ( period = 11.100 ns ) ; JTAGcore:inst4|SM~127 ; JTAGcore:inst4|RD ; CLK ; CLK ; 40.000 ns ; 35.500 ns ; 6.600 ns ;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -