soundsample.fit.eqn

语音采集,直接在QUARTUSII中打开调试.

F1_ram_block1a0_PORT_A_data_in_reg = DFFE(F1_ram_block1a0_PORT_A_data_in, F1_ram_block1a0_clock_0, , , F1_ram_block1a0_clock_enable_0);
F1_ram_block1a0_PORT_A_address = BUS(C1_CQI[0], C1_CQI[1], C1_CQI[2], C1_CQI[3], C1_CQI[4], C1_CQI[5], C1_CQI[6], C1_CQI[7], C1_CQI[8], C1_CQI[9], C1_CQI[10], C1_CQI[11]);
F1_ram_block1a0_PORT_A_address_reg = DFFE(F1_ram_block1a0_PORT_A_address, F1_ram_block1a0_clock_0, , , F1_ram_block1a0_clock_enable_0);
F1_ram_block1a0_PORT_A_write_enable = G1_w_anode221w[2];
F1_ram_block1a0_PORT_A_write_enable_reg = DFFE(F1_ram_block1a0_PORT_A_write_enable, F1_ram_block1a0_clock_0, , , F1_ram_block1a0_clock_enable_0);
F1_ram_block1a0_clock_0 = GLOBAL(C1L1);
F1_ram_block1a0_clock_enable_0 = G1L3;
F1_ram_block1a0_PORT_A_data_out = MEMORY(F1_ram_block1a0_PORT_A_data_in_reg, , F1_ram_block1a0_PORT_A_address_reg, , F1_ram_block1a0_PORT_A_write_enable_reg, , , , F1_ram_block1a0_clock_0, , F1_ram_block1a0_clock_enable_0, , , );
F1_ram_block1a0 = F1_ram_block1a0_PORT_A_data_out[0];


--H1L1 is soundram:inst|altsyncram:altsyncram_component|altsyncram_i041:auto_generated|mux_2bb:mux2|result_node[0]~366 at LC_X35_Y10_N2
--operation mode is normal

H1L1 = F1_address_reg_a[0] & (F1_ram_block1a8 # F1_address_reg_a[1]) # !F1_address_reg_a[0] & (!F1_address_reg_a[1] & F1_ram_block1a0);


--F1_ram_block1a24 is soundram:inst|altsyncram:altsyncram_component|altsyncram_i041:auto_generated|ram_block1a24 at M4K_X33_Y17
--RAM Block Operation Mode: Single Port
--Port A Depth: 4096, Port A Width: 1
--Port A Logical Depth: 16384, Port A Logical Width: 8
--Port A Input: Registered, Port A Output: Un-registered
F1_ram_block1a24_PORT_A_data_in = D1_datain[0];
F1_ram_block1a24_PORT_A_data_in_reg = DFFE(F1_ram_block1a24_PORT_A_data_in, F1_ram_block1a24_clock_0, , , F1_ram_block1a24_clock_enable_0);
F1_ram_block1a24_PORT_A_address = BUS(C1_CQI[0], C1_CQI[1], C1_CQI[2], C1_CQI[3], C1_CQI[4], C1_CQI[5], C1_CQI[6], C1_CQI[7], C1_CQI[8], C1_CQI[9], C1_CQI[10], C1_CQI[11]);
F1_ram_block1a24_PORT_A_address_reg = DFFE(F1_ram_block1a24_PORT_A_address, F1_ram_block1a24_clock_0, , , F1_ram_block1a24_clock_enable_0);
F1_ram_block1a24_PORT_A_write_enable = G1_w_anode250w[2];
F1_ram_block1a24_PORT_A_write_enable_reg = DFFE(F1_ram_block1a24_PORT_A_write_enable, F1_ram_block1a24_clock_0, , , F1_ram_block1a24_clock_enable_0);
F1_ram_block1a24_clock_0 = GLOBAL(C1L1);
F1_ram_block1a24_clock_enable_0 = G1L12;
F1_ram_block1a24_PORT_A_data_out = MEMORY(F1_ram_block1a24_PORT_A_data_in_reg, , F1_ram_block1a24_PORT_A_address_reg, , F1_ram_block1a24_PORT_A_write_enable_reg, , , , F1_ram_block1a24_clock_0, , F1_ram_block1a24_clock_enable_0, , , );
F1_ram_block1a24 = F1_ram_block1a24_PORT_A_data_out[0];


--H1L2 is soundram:inst|altsyncram:altsyncram_component|altsyncram_i041:auto_generated|mux_2bb:mux2|result_node[0]~367 at LC_X35_Y10_N4
--operation mode is normal

H1L2 = H1L1 & (F1_ram_block1a24 # !F1_address_reg_a[1]) # !H1L1 & F1_ram_block1a16 & F1_address_reg_a[1];


--D1_present_state.swait is ad0809:inst2|present_state.swait at LC_X8_Y13_N5
--operation mode is normal

D1_present_state.swait_lut_out = D1_present_state.write # D1_present_state.swait & INT;
D1_present_state.swait = DFFEAS(D1_present_state.swait_lut_out, GLOBAL(CLK), GLOBAL(CLR), , , , , , );


--D1_present_state.idle is ad0809:inst2|present_state.idle at LC_X8_Y13_N6
--operation mode is normal

D1_present_state.idle_lut_out = !D1_present_state.slock;
D1_present_state.idle = DFFEAS(D1_present_state.idle_lut_out, GLOBAL(CLK), GLOBAL(CLR), , , , , , );


--C1_CQI[12] is COUNTER:inst1|CQI[12] at LC_X15_Y13_N5
--operation mode is arithmetic

C1_CQI[12]_carry_eqn = C1L35;
C1_CQI[12]_lut_out = C1_CQI[12] $ !C1_CQI[12]_carry_eqn;
C1_CQI[12] = DFFEAS(C1_CQI[12]_lut_out, GLOBAL(C1L1), GLOBAL(CLR), , , , , , );

--C1L37 is COUNTER:inst1|CQI[12]~113 at LC_X15_Y13_N5
--operation mode is arithmetic

C1L37_cout_0 = C1_CQI[12] & !C1L35;
C1L37 = CARRY(C1L37_cout_0);

--C1L38 is COUNTER:inst1|CQI[12]~113COUT1_178 at LC_X15_Y13_N5
--operation mode is arithmetic

C1L38_cout_1 = C1_CQI[12] & !C1L35;
C1L38 = CARRY(C1L38_cout_1);


--C1_CQI[13] is COUNTER:inst1|CQI[13] at LC_X15_Y13_N6
--operation mode is normal

C1_CQI[13]_carry_eqn = (!C1L35 & C1L37) # (C1L35 & C1L38);
C1_CQI[13]_lut_out = C1_CQI[13]_carry_eqn $ C1_CQI[13];
C1_CQI[13] = DFFEAS(C1_CQI[13]_lut_out, GLOBAL(C1L1), GLOBAL(CLR), , , , , , );


--G1_w_anode234w[2] is soundram:inst|altsyncram:altsyncram_component|altsyncram_i041:auto_generated|decode_iga:decode3|w_anode234w[2] at LC_X15_Y13_N8
--operation mode is normal

G1_w_anode234w[2] = WREN & C1_CQI[12] & (!C1_CQI[13]);


--C1L1 is COUNTER:inst1|CLKOUT~7 at LC_X15_Y13_N7
--operation mode is normal

C1L1 = WREN & (D1_present_state.slock) # !WREN & CLK;


--G1L6 is soundram:inst|altsyncram:altsyncram_component|altsyncram_i041:auto_generated|decode_iga:decode3|w_anode234w[2]~9 at LC_X15_Y13_N9
--operation mode is normal

G1L6 = C1_CQI[12] & (!C1_CQI[13]);


--D1_datain[7] is ad0809:inst2|datain[7] at LC_X18_Y18_N2
--operation mode is normal
--sload is tied to vcc, which is functionally the same as treating the sdata port as the data input.

D1_datain[7]_lut_out = GND;
D1_datain[7] = DFFEAS(D1_datain[7]_lut_out, GLOBAL(D1_present_state.slock), VCC, , , D[7], , , VCC);


--C1_CQI[0] is COUNTER:inst1|CQI[0] at LC_X15_Y14_N3
--operation mode is arithmetic

C1_CQI[0]_lut_out = !C1_CQI[0];
C1_CQI[0] = DFFEAS(C1_CQI[0]_lut_out, GLOBAL(C1L1), GLOBAL(CLR), , , , , , );

--C1L4 is COUNTER:inst1|CQI[0]~121 at LC_X15_Y14_N3
--operation mode is arithmetic

C1L4_cout_0 = C1_CQI[0];
C1L4 = CARRY(C1L4_cout_0);

--C1L5 is COUNTER:inst1|CQI[0]~121COUT1_169 at LC_X15_Y14_N3
--operation mode is arithmetic

C1L5_cout_1 = C1_CQI[0];
C1L5 = CARRY(C1L5_cout_1);


--C1_CQI[1] is COUNTER:inst1|CQI[1] at LC_X15_Y14_N4
--operation mode is arithmetic

C1_CQI[1]_lut_out = C1_CQI[1] $ C1L4;
C1_CQI[1] = DFFEAS(C1_CQI[1]_lut_out, GLOBAL(C1L1), GLOBAL(CLR), , , , , , );

--C1L7 is COUNTER:inst1|CQI[1]~125 at LC_X15_Y14_N4
--operation mode is arithmetic

C1L7 = CARRY(!C1L5 # !C1_CQI[1]);


--C1_CQI[2] is COUNTER:inst1|CQI[2] at LC_X15_Y14_N5
--operation mode is arithmetic

C1_CQI[2]_carry_eqn = C1L7;
C1_CQI[2]_lut_out = C1_CQI[2] $ !C1_CQI[2]_carry_eqn;
C1_CQI[2] = DFFEAS(C1_CQI[2]_lut_out, GLOBAL(C1L1), GLOBAL(CLR), , , , , , );

--C1L9 is COUNTER:inst1|CQI[2]~129 at LC_X15_Y14_N5
--operation mode is arithmetic

C1L9_cout_0 = C1_CQI[2] & !C1L7;
C1L9 = CARRY(C1L9_cout_0);

--C1L10 is COUNTER:inst1|CQI[2]~129COUT1_170 at LC_X15_Y14_N5
--operation mode is arithmetic

C1L10_cout_1 = C1_CQI[2] & !C1L7;
C1L10 = CARRY(C1L10_cout_1);


--C1_CQI[3] is COUNTER:inst1|CQI[3] at LC_X15_Y14_N6
--operation mode is arithmetic

C1_CQI[3]_carry_eqn = (!C1L7 & C1L9) # (C1L7 & C1L10);
C1_CQI[3]_lut_out = C1_CQI[3] $ (C1_CQI[3]_carry_eqn);
C1_CQI[3] = DFFEAS(C1_CQI[3]_lut_out, GLOBAL(C1L1), GLOBAL(CLR), , , , , , );

--C1L12 is COUNTER:inst1|CQI[3]~133 at LC_X15_Y14_N6
--operation mode is arithmetic

C1L12_cout_0 = !C1L9 # !C1_CQI[3];
C1L12 = CARRY(C1L12_cout_0);

--C1L13 is COUNTER:inst1|CQI[3]~133COUT1_171 at LC_X15_Y14_N6
--operation mode is arithmetic

C1L13_cout_1 = !C1L10 # !C1_CQI[3];
C1L13 = CARRY(C1L13_cout_1);


--C1_CQI[4] is COUNTER:inst1|CQI[4] at LC_X15_Y14_N7
--operation mode is arithmetic

C1_CQI[4]_carry_eqn = (!C1L7 & C1L12) # (C1L7 & C1L13);
C1_CQI[4]_lut_out = C1_CQI[4] $ (!C1_CQI[4]_carry_eqn);
C1_CQI[4] = DFFEAS(C1_CQI[4]_lut_out, GLOBAL(C1L1), GLOBAL(CLR), , , , , , );

--C1L15 is COUNTER:inst1|CQI[4]~137 at LC_X15_Y14_N7
--operation mode is arithmetic

C1L15_cout_0 = C1_CQI[4] & (!C1L12);
C1L15 = CARRY(C1L15_cout_0);

--C1L16 is COUNTER:inst1|CQI[4]~137COUT1_172 at LC_X15_Y14_N7
--operation mode is arithmetic

C1L16_cout_1 = C1_CQI[4] & (!C1L13);
C1L16 = CARRY(C1L16_cout_1);


--C1_CQI[5] is COUNTER:inst1|CQI[5] at LC_X15_Y14_N8
--operation mode is arithmetic

C1_CQI[5]_carry_eqn = (!C1L7 & C1L15) # (C1L7 & C1L16);
C1_CQI[5]_lut_out = C1_CQI[5] $ C1_CQI[5]_carry_eqn;
C1_CQI[5] = DFFEAS(C1_CQI[5]_lut_out, GLOBAL(C1L1), GLOBAL(CLR), , , , , , );

--C1L18 is COUNTER:inst1|CQI[5]~141 at LC_X15_Y14_N8
--operation mode is arithmetic

C1L18_cout_0 = !C1L15 # !C1_CQI[5];
C1L18 = CARRY(C1L18_cout_0);

--C1L19 is COUNTER:inst1|CQI[5]~141COUT1_173 at LC_X15_Y14_N8
--operation mode is arithmetic

C1L19_cout_1 = !C1L16 # !C1_CQI[5];
C1L19 = CARRY(C1L19_cout_1);