📄 main.pin
字号:
-- Copyright (C) 1991-2004 Altera Corporation
-- Any megafunction design, and related netlist (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only
-- to program PLD devices (but not masked PLD devices) from Altera. Any
-- other use of such megafunction design, netlist, support information,
-- device programming or simulation file, or any other related documentation
-- or information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to the
-- intellectual property, including patents, copyrights, trademarks, trade
-- secrets, or maskworks, embodied in any such megafunction design, netlist,
-- support information, device programming or simulation file, or any other
-- related documentation or information provided by Altera or a megafunction
-- partner, remains with Altera, the megafunction partner, or their respective
-- licensors. No other licenses, including any licenses needed under any third
-- party's intellectual property, are provided herein.
--
-- This is a Quartus II output file. It is for reporting purposes only, and is
-- not intended for use as a Quartus II input file. This file cannot be used
-- to make Quartus II pin assignments - for instructions on how to make pin
-- assignments, please see Quartus II help.
------------------------------------------------------------------------------
------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCC_INT : Dedicated power pin, which MUST be connected to VCC (2.5V).
-- VCC_IO : Dedicated power pin, which MUST be connected to VCC (Refer to
-- the table below for voltage).
-- GND : Dedicated ground pin, which MUST be connected to GND.
-- GND+ : Unused input. This pin should be connected to GND. It may also
-- be connected to a valid signal on the board (low, high, or
-- toggling) if that signal is required for a different revision
-- of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
------------------------------------------------------------------------------
Quartus II Version 4.2 Build 157 12/07/2004 SJ Full Version
CHIP "main" ASSIGNED TO AN: EP1K10TC100-1
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
CONF_DONE : 1 : bidir : : : :
nCEO : 2 : output : : : :
TDO : 3 : output : : : :
VCC_IO : 4 : power : : 3.3V : :
Acceleration[12] : 5 : input : LVTTL/LVCMOS : : : N
Acceleration[4] : 6 : input : LVTTL/LVCMOS : : : N
Acceleration[7] : 7 : input : LVTTL/LVCMOS : : : N
Acceleration[1] : 8 : input : LVTTL/LVCMOS : : : N
Acceleration[10] : 9 : input : LVTTL/LVCMOS : : : N
Acceleration[3] : 10 : input : LVTTL/LVCMOS : : : N
GND_INT : 11 : gnd : : : :
VCC_INT : 12 : power : : 2.5V : :
Step_Sum[14] : 13 : input : LVTTL/LVCMOS : : : N
Step_Sum[20] : 14 : input : LVTTL/LVCMOS : : : N
Step_Sum[22] : 15 : input : LVTTL/LVCMOS : : : N
Step_Sum[4] : 16 : input : LVTTL/LVCMOS : : : N
VCC_IO : 17 : power : : 3.3V : :
GND_INT : 18 : gnd : : : :
Initial_Speed[15] : 19 : input : LVTTL/LVCMOS : : : N
Acceleration[15] : 20 : input : LVTTL/LVCMOS : : : N
Initial_Speed[4] : 21 : input : LVTTL/LVCMOS : : : N
Initial_Speed[10] : 22 : input : LVTTL/LVCMOS : : : N
Initial_Speed[9] : 23 : input : LVTTL/LVCMOS : : : N
TMS : 24 : input : : : :
nSTATUS : 25 : bidir : : : :
Step_Sum[1] : 26 : input : LVTTL/LVCMOS : : : N
Step_Sum[0] : 27 : input : LVTTL/LVCMOS : : : N
Step_Sum[23] : 28 : input : LVTTL/LVCMOS : : : N
Step_Sum[11] : 29 : input : LVTTL/LVCMOS : : : N
Step_Sum[6] : 30 : input : LVTTL/LVCMOS : : : N
Acceleration[13] : 31 : input : LVTTL/LVCMOS : : : N
Step_Sum[5] : 32 : input : LVTTL/LVCMOS : : : N
Step_Sum[16] : 33 : input : LVTTL/LVCMOS : : : N
Step_Sum[10] : 34 : input : LVTTL/LVCMOS : : : N
VCC_INT : 35 : power : : 2.5V : :
GND_INT : 36 : gnd : : : :
VCC_CKLK : 37 : power : : 2.5V : :
Acceleration[16] : 38 : input : LVTTL/LVCMOS : : : N
Clock_8MHz : 39 : input : LVTTL/LVCMOS : : : N
Acceleration[6] : 40 : input : LVTTL/LVCMOS : : : N
GND_CKLK : 41 : gnd : : : :
GND_INT : 42 : gnd : : : :
GND* : 43 : : : : :
VCC_IO : 44 : power : : 3.3V : :
Initial_Speed[11] : 45 : input : LVTTL/LVCMOS : : : N
Pulse_Wave : 46 : output : LVTTL/LVCMOS : : : N
Initial_Speed[8] : 47 : input : LVTTL/LVCMOS : : : N
GND* : 48 : : : : :
Initial_Speed[7] : 49 : input : LVTTL/LVCMOS : : : N
Initial_Speed[12] : 50 : input : LVTTL/LVCMOS : : : N
nCONFIG : 51 : input : : : :
VCC_INT : 52 : power : : 2.5V : :
MSEL1 : 53 : input : : : :
MSEL0 : 54 : input : : : :
Initial_Speed[2] : 55 : input : LVTTL/LVCMOS : : : N
Initial_Speed[6] : 56 : input : LVTTL/LVCMOS : : : N
Initial_Speed[1] : 57 : input : LVTTL/LVCMOS : : : N
Initial_Speed[14] : 58 : input : LVTTL/LVCMOS : : : N
GND_INT : 59 : gnd : : : :
VCC_INT : 60 : power : : 2.5V : :
Step_Sum[3] : 61 : input : LVTTL/LVCMOS : : : N
Step_Sum[13] : 62 : input : LVTTL/LVCMOS : : : N
Step_Sum[21] : 63 : input : LVTTL/LVCMOS : : : N
Step_Sum[18] : 64 : input : LVTTL/LVCMOS : : : N
Step_Sum[15] : 65 : input : LVTTL/LVCMOS : : : N
GND_INT : 66 : gnd : : : :
VCC_IO : 67 : power : : 3.3V : :
Acceleration[9] : 68 : input : LVTTL/LVCMOS : : : N
Acceleration[8] : 69 : input : LVTTL/LVCMOS : : : N
Acceleration[11] : 70 : input : LVTTL/LVCMOS : : : N
Acceleration[0] : 71 : input : LVTTL/LVCMOS : : : N
VCC_INT : 72 : power : : 2.5V : :
TDI : 73 : input : : : :
nCE : 74 : input : : : :
DCLK : 75 : bidir : : : :
DATA0 : 76 : input : : : :
Step_Sum[9] : 77 : input : LVTTL/LVCMOS : : : N
GND* : 78 : : : : :
Step_Sum[12] : 79 : input : LVTTL/LVCMOS : : : N
Step_Sum[19] : 80 : input : LVTTL/LVCMOS : : : N
Initial_Speed[0] : 81 : input : LVTTL/LVCMOS : : : N
Initial_Speed[3] : 82 : input : LVTTL/LVCMOS : : : N
VCC_IO : 83 : power : : 3.3V : :
Initial_Speed[5] : 84 : input : LVTTL/LVCMOS : : : N
Initial_Speed[13] : 85 : input : LVTTL/LVCMOS : : : N
GND* : 86 : : : : :
GND* : 87 : : : : :
GND_INT : 88 : gnd : : : :
Reset : 89 : input : LVTTL/LVCMOS : : : N
Acceleration[5] : 90 : input : LVTTL/LVCMOS : : : N
GND+ : 91 : : : : :
VCC_INT : 92 : power : : 2.5V : :
Acceleration[14] : 93 : input : LVTTL/LVCMOS : : : N
Acceleration[2] : 94 : input : LVTTL/LVCMOS : : : N
GND_INT : 95 : gnd : : : :
Step_Sum[2] : 96 : input : LVTTL/LVCMOS : : : N
Step_Sum[17] : 97 : input : LVTTL/LVCMOS : : : N
Step_Sum[7] : 98 : input : LVTTL/LVCMOS : : : N
Step_Sum[8] : 99 : input : LVTTL/LVCMOS : : : N
TCK : 100 : input : : : :
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -