📄 _impact.log

📁 一个在Xilinx spartan3实现的时钟
💻 LOG
字号:
iMPACT Version: G.23
iMPACT log file Started on 2007/08/01 21:04:52
// *** BATCH CMD : setPreference -pref UserLevel:NOVICE
// *** BATCH CMD : setPreference -pref MessageLevel:DETAILED
// *** BATCH CMD : setPreference -pref ConcurrentMode:FALSE
// *** BATCH CMD : setPreference -pref UseHighz:FALSE
// *** BATCH CMD : setPreference -pref ConfigOnFailure:STOP
// *** BATCH CMD : setPreference -pref StartupCLock:AUTO_CORRECTION
// *** BATCH CMD : setPreference -pref AutoSignature:FALSE
// *** BATCH CMD : setPreference -pref KeepSVF:FALSE
// *** BATCH CMD : setPreference -pref svfUseTime:FALSE
// *** BATCH CMD : setPreference -pref UserLevel:NOVICE
// *** BATCH CMD : setPreference -pref MessageLevel:DETAILED
// *** BATCH CMD : setPreference -pref ConcurrentMode:FALSE
// *** BATCH CMD : setPreference -pref UseHighz:FALSE
// *** BATCH CMD : setPreference -pref ConfigOnFailure:STOP
// *** BATCH CMD : setPreference -pref StartupCLock:AUTO_CORRECTION
// *** BATCH CMD : setPreference -pref AutoSignature:FALSE
// *** BATCH CMD : setPreference -pref KeepSVF:FALSE
// *** BATCH CMD : setPreference -pref svfUseTime:FALSE
GUI --- Boundary-Scan Mode selected
// *** BATCH CMD : setMode -bs
GUI --- Auto connect to cable...
// *** BATCH CMD : setCable -port auto
AutoDetecting cable. Please wait.
CB_PROGRESS_START - Starting Operation.
Connecting to cable (USB Port).
Cable connection failed.
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
 Driver windrvr.sys version = 5.0.5.1. LPT base address = 0378h.
Cable connection established.
CB_PROGRESS_END - End Operation.
Elapsed time =      1 sec.
// *** BATCH CMD : Identify
PROGRESS_START - Starting Operation.
Identifying chain contents ....'1': : Manufacturer's ID =Xilinx xc3s400, Version : 0
INFO:iMPACT:1777 - 
Reading D:/Xilinx/spartan3/data/xc3s400.bsd...
Reading D:/Xilinx/spartan3/data/xc3s400.bsd...
INFO:iMPACT:501 - '1': Added Device xc3s400 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
PROGRESS_END - End Operation.
Elapsed time =      1 sec.
// *** BATCH CMD : setAttribute -position 1 -attr configFileName -value "E:\hardware_projects\ise_projects\eternityclock\clocktop.bit"
'1': Loading file 'E:\hardware_projects\ise_projects\eternityclock\clocktop.bit' ...
done.
WARNING:iMPACT:1049 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s400 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
// *** BATCH CMD : Program -p 1 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming  device...done.
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =      7 sec.
WARNING:iMPACT - File E:\hardware_projects\ise_projects\eternityclock\clocktop.bit has been changed on disk. Currently there is a copy of the older version in use, iMPACT will reload the file in this instance.
// *** BATCH CMD : setAttribute -position 1 -attr configFileName -value "E:\hardware_projects\ise_projects\eternityclock\clocktop.bit"
'1': Loading file 'E:\hardware_projects\ise_projects\eternityclock\clocktop.bit' ...
done.
WARNING:iMPACT:1049 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s400 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
// *** BATCH CMD : Program -p 1 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming  device...done.
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programming terminated, Done did not go high.
PROGRESS_END - End Operation.
Elapsed time =      8 sec.
// *** BATCH CMD : Program -p 1 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming  device...done.
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =      8 sec.
WARNING:iMPACT - File E:\hardware_projects\ise_projects\eternityclock\clocktop.bit has been changed on disk. Currently there is a copy of the older version in use, iMPACT will reload the file in this instance.
// *** BATCH CMD : setAttribute -position 1 -attr configFileName -value "E:\hardware_projects\ise_projects\eternityclock\clocktop.bit"
'1': Loading file 'E:\hardware_projects\ise_projects\eternityclock\clocktop.bit' ...
done.
WARNING:iMPACT:1049 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s400 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
// *** BATCH CMD : Program -p 1 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming  device...done.
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =      8 sec.
WARNING:iMPACT - File E:\hardware_projects\ise_projects\eternityclock\clocktop.bit has been changed on disk. Currently there is a copy of the older version in use, iMPACT will reload the file in this instance.
// *** BATCH CMD : setAttribute -position 1 -attr configFileName -value "E:\hardware_projects\ise_projects\eternityclock\clocktop.bit"
'1': Loading file 'E:\hardware_projects\ise_projects\eternityclock\clocktop.bit' ...
done.
WARNING:iMPACT:1049 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s400 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
// *** BATCH CMD : Program -p 1 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming  device...done.
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =      8 sec.
// *** BATCH CMD : Program -p 1 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming  device...done.
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programming terminated, Done did not go high.
PROGRESS_END - End Operation.
Elapsed time =      7 sec.
// *** BATCH CMD : Program -p 1 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming  device...done.
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programming terminated, Done did not go high.
PROGRESS_END - End Operation.
Elapsed time =      8 sec.
WARNING:iMPACT - File E:\hardware_projects\ise_projects\eternityclock\clocktop.bit has been changed on disk. Currently there is a copy of the older version in use, iMPACT will reload the file in this instance.
// *** BATCH CMD : setAttribute -position 1 -attr configFileName -value "E:\hardware_projects\ise_projects\eternityclock\clocktop.bit"
'1': Loading file 'E:\hardware_projects\ise_projects\eternityclock\clocktop.bit' ...
done.
WARNING:iMPACT:1049 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s400 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
// *** BATCH CMD : Program -p 1 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming  device...done.
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programming terminated, Done did not go high.
PROGRESS_END - End Operation.
Elapsed time =      8 sec.
// *** BATCH CMD : Program -p 1 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming  device...done.
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =      8 sec.
WARNING:iMPACT - File E:\hardware_projects\ise_projects\eternityclock\clocktop.bit has been changed on disk. Currently there is a copy of the older version in use, iMPACT will reload the file in this instance.
// *** BATCH CMD : setAttribute -position 1 -attr configFileName -value "E:\hardware_projects\ise_projects\eternityclock\clocktop.bit"
'1': Loading file 'E:\hardware_projects\ise_projects\eternityclock\clocktop.bit' ...
done.
WARNING:iMPACT:1049 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s400 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
// *** BATCH CMD : Program -p 1 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming  device...done.
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =      8 sec.
WARNING:iMPACT - File E:\hardware_projects\ise_projects\eternityclock\clocktop.bit has been changed on disk. Currently there is a copy of the older version in use, iMPACT will reload the file in this instance.
// *** BATCH CMD : setAttribute -position 1 -attr configFileName -value "E:\hardware_projects\ise_projects\eternityclock\clocktop.bit"
'1': Loading file 'E:\hardware_projects\ise_projects\eternityclock\clocktop.bit' ...
done.
WARNING:iMPACT:1049 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s400 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
// *** BATCH CMD : Program -p 1 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming  device...done.
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =      8 sec.
WARNING:iMPACT - File E:\hardware_projects\ise_projects\eternityclock\clocktop.bit has been changed on disk. Currently there is a copy of the older version in use, iMPACT will reload the file in this instance.
// *** BATCH CMD : setAttribute -position 1 -attr configFileName -value "E:\hardware_projects\ise_projects\eternityclock\clocktop.bit"
'1': Loading file 'E:\hardware_projects\ise_projects\eternityclock\clocktop.bit' ...
done.
WARNING:iMPACT:1049 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s400 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
// *** BATCH CMD : Program -p 1 
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming  device...done.
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =      7 sec.
*****   Closing iMPACT program.   *****
⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -