📄 cntm2.rpt
字号:
D15 RESERVED J2 N.C. N11 VCCIO U20 RESERVED AB7 N.C.
D16 RESERVED J3 RESERVED N12 VCCINT U21 RESERVED AB8 RESERVED
D17 GND J4 RESERVED N13 GND U22 RESERVED AB9 RESERVED
D18 RESERVED J5 RESERVED N14 VCCIO V1 RESERVED AB10 RESERVED
D19 RESERVED J6 RESERVED N15 RESERVED V2 RESERVED AB11 GND
D20 RESERVED J7 RESERVED N16 RESERVED V3 GND AB12 RESERVED
D21 RESERVED J8 VCCINT N17 RESERVED V4 ^MSEL1 AB13 VCCIO
D22 RESERVED J9 GND N18 RESERVED V5 VCCINT AB14 RESERVED
E1 VCCIO J10 VCCINT N19 RESERVED V6 RESERVED AB15 N.C.
E2 RESERVED J11 VCCIO N20 VCCIO V7 RESERVED AB16 GND
E3 RESERVED J12 VCCINT N21 RESERVED V8 RESERVED AB17 N.C.
E4 ^nCE J13 VCCIO N22 RESERVED V9 RESERVED AB18 N.C.
E5 ^DCLK J14 GND P1 RESERVED V10 RESERVED AB19 N.C.
E6 RESERVED J15 VCCINT P2 RESERVED V11 GND AB20 N.C.
E7 RESERVED J16 RESERVED P3 RESERVED V12 RESERVED AB21 RESERVED
E8 RESERVED J17 RESERVED P4 GND V13 RESERVED AB22 RESERVED
E9 RESERVED J18 RESERVED P5 RESERVED V14 RESERVED
N.C. = No Connect. This pin has no internal connection to the device.
VCCINT = Dedicated power pin, which MUST be connected to VCC (2.5 volts).
VCCIO = Dedicated power pin, which MUST be connected to VCC (2.5 volts).
GND = Dedicated ground pin or unused dedicated input, which MUST be connected to GND.
RESERVED = Unused I/O pin, which MUST be left unconnected.
^ = Dedicated configuration pin.
+ = Reserved configuration pin, which is tri-stated during user mode.
* = Reserved configuration pin, which drives out in user mode.
PDn = Power Down pin.
@ = Special-purpose pin.
# = JTAG Boundary-Scan Testing/In-System Programming or Configuration Pin. The JTAG inputs TMS and TDI should be tied to VCC and TCK should be tied to GND when not in use.
& = JTAG pin used for I/O. When used as user I/O, JTAG pins must be kept stable before and during configuration. JTAG pin stability prevents accidental loading of JTAG instructions.
$ = Pin has PCI I/O option enabled. Pin is neither '5.0 V'- nor '3.3 V'-tolerant.
Device-Specific Information: c:\maxplus2\verilog6\cntm2.rpt
cntm2
** RESOURCE USAGE **
Logic Column Row
Array Interconnect Interconnect Clears/ External
Block Logic Cells Driven Driven Clocks Presets Interconnect
B43 4/ 8( 50%) 0/ 8( 0%) 4/ 8( 50%) 1/2 0/2 0/26( 0%)
Embedded Column Row
Array Embedded Interconnect Interconnect Read/ External
Block Cells Driven Driven Clocks Write Interconnect
Total dedicated input pins used: 1/6 ( 16%)
Total I/O pins used: 4/327 ( 1%)
Total logic cells used: 4/4992 ( 0%)
Total embedded cells used: 0/192 ( 0%)
Total EABs used: 0/12 ( 0%)
Average fan-in: 3.25/4 ( 81%)
Total fan-in: 13/19968 ( 0%)
Total input pins required: 1
Total input I/O cell registers required: 0
Total output pins required: 4
Total output I/O cell registers required: 0
Total buried I/O cell registers required: 0
Total bidirectional pins required: 0
Total reserved pins required 0
Total logic cells required: 4
Total flipflops required: 4
Total packed registers required: 0
Total logic cells in carry chains: 0
Total number of carry chains: 0
Total logic cells in cascade chains: 0
Total number of cascade chains: 0
Total single-pin Clock Enables required: 0
Total single-pin Output Enables required: 0
Synthesized logic cells: 0/4992 ( 0%)
Logic Cell and Embedded Cell Counts
Column: 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 EA 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 Total(LC/EC)
A: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0/0
B: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0 0 0 0 0 0 0 0 4/0
C: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0/0
D: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0/0
E: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0/0
F: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0/0
G: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0/0
H: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0/0
I: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0/0
J: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0/0
K: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0/0
L: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0/0
Total: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0 0 0 0 0 0 0 0 4/0
Device-Specific Information: c:\maxplus2\verilog6\cntm2.rpt
cntm2
** INPUTS **
Fan-In Fan-Out
Pin LC EC Row Col Primitive Code INP FBK OUT FBK Name
D12 - - - -- INPUT G ^ 0 0 0 0 clk
Code:
s = Synthesized pin or logic cell
+ = Synchronous flipflop
/ = Slow slew-rate output
! = NOT gate push-back
r = Fitter-inserted logic cell
^ = Increased input delay
* = PCI I/O is enabled
@ = Uses single-pin Clock Enable
& = Uses single-pin Output Enable
G = Global Source. Fan-out destinations counted here do not include destinations
that are driven using global routing resources. Refer to the Auto Global Signals,
Clock Signals, Clear Signals, Synchronous Load Signals, and Synchronous Clear Signals
Sections of this Report File for information on which signals' fan-outs are used as
Clock, Clear, Preset, Output Enable, and synchronous Load signals.
Device-Specific Information: c:\maxplus2\verilog6\cntm2.rpt
cntm2
** OUTPUTS **
Fed By Fed By Fan-In Fan-Out
Pin LC EC Row Col Primitive Code INP FBK OUT FBK Name
G4 - - B -- OUTPUT 0 1 0 0 cq0
F21 - - B -- OUTPUT 0 1 0 0 cq1
G19 - - B -- OUTPUT 0 1 0 0 cq2
H7 - - B -- OUTPUT 0 1 0 0 cq3
Code:
s = Synthesized pin or logic cell
+ = Synchronous flipflop
/ = Slow slew-rate output
! = NOT gate push-back
r = Fitter-inserted logic cell
^ = Increased input delay
* = PCI I/O is enabled
@ = Uses single-pin Clock Enable
& = Uses single-pin Output Enable
Device-Specific Information: c:\maxplus2\verilog6\cntm2.rpt
cntm2
** BURIED LOGIC **
Fan-In Fan-Out
IOC LC EC Row Col Primitive Code INP FBK OUT FBK Name
- 8 - B 43 DFFE + 0 3 1 2 :41
- 2 - B 43 DFFE + 0 3 1 2 :42
- 1 - B 43 DFFE + 0 3 1 2 :43
- 4 - B 43 DFFE + 0 0 1 3 :44
Code:
s = Synthesized pin or logic cell
+ = Synchronous flipflop
/ = Slow slew-rate output
! = NOT gate push-back
r = Fitter-inserted logic cell
^ = Increased input delay
* = PCI I/O is enabled
p = Packed register
Device-Specific Information: c:\maxplus2\verilog6\cntm2.rpt
cntm2
** FASTTRACK INTERCONNECT UTILIZATION **
Row FastTrack Interconnect:
Global Left Half- Right Half-
FastTrack FastTrack FastTrack
Row Interconnect Interconnect Interconnect Input Pins Output Pins Bidir Pins
A: 0/208( 0%) 0/104( 0%) 0/104( 0%) 0/16( 0%) 0/16( 0%) 0/16( 0%)
B: 2/208( 0%) 0/104( 0%) 2/104( 1%) 0/16( 0%) 4/16( 25%) 0/16( 0%)
C: 0/208( 0%) 0/104( 0%) 0/104( 0%) 0/16( 0%) 0/16( 0%) 0/16( 0%)
D: 0/208( 0%) 0/104( 0%) 0/104( 0%) 0/16( 0%) 0/16( 0%) 0/16( 0%)
E: 0/208( 0%) 0/104( 0%) 0/104( 0%) 0/16( 0%) 0/16( 0%) 0/16( 0%)
F: 0/208( 0%) 0/104( 0%) 0/104( 0%) 0/16( 0%) 0/16( 0%) 0/16( 0%)
G: 0/208( 0%) 0/104( 0%) 0/104( 0%) 0/16( 0%) 0/16( 0%) 0/16( 0%)
H: 0/208( 0%) 0/104( 0%) 0/104( 0%) 0/16( 0%) 0/16( 0%) 0/16( 0%)
I: 0/208( 0%) 0/104( 0%) 0/104( 0%) 0/16( 0%) 0/16( 0%) 0/16( 0%)
J: 0/208( 0%) 0/104( 0%) 0/104( 0%) 0/16( 0%) 0/16( 0%) 0/16( 0%)
K: 0/208( 0%) 0/104( 0%) 0/104( 0%) 0/16( 0%) 0/16( 0%) 0/16( 0%)
L: 0/208( 0%) 0/104( 0%) 0/104( 0%) 0/16( 0%) 0/16( 0%) 0/16( 0%)
Column FastTrack Interconnect:
FastTrack
Column Interconnect Input Pins Output Pins Bidir Pins
01: 0/24( 0%) 0/4( 0%) 0/4( 0%) 0/4( 0%)
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -