spi_master.fit.qmsg

AN485_CH-MAX II CPLD 中的串行外设接口主机（verilog SPI）

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0 "" 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 7.2 Build 151 09/26/2007 SJ Full Version " "Info: Version 7.2 Build 151 09/26/2007 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0 "" 0} { "Info" "IQEXE_START_BANNER_TIME" "Thu Nov 22 16:41:56 2007 " "Info: Processing started: Thu Nov 22 16:41:56 2007" {  } {  } 0 0 "Processing started: %1!s!" 0 0 "" 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0 "" 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off SPI_Master -c SPI_Master " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off SPI_Master -c SPI_Master" {  } {  } 0 0 "Command: %1!s!" 0 0 "" 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "SPI_Master EPM240GT100C3 " "Info: Selected device EPM240GT100C3 for design \"SPI_Master\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0 "" 0}
{ "Warning" "WCUT_CUT_DEFAULT_OPERATING_CONDITION" "high junction temperature 85 " "Warning: The high junction temperature operating condition is not set. Assuming a default value of '85'." {  } {  } 0 0 "The %1!s! operating condition is not set. Assuming a default value of '%2!s!'." 0 0 "" 0}
{ "Warning" "WCUT_CUT_DEFAULT_OPERATING_CONDITION" "low junction temperature 0 " "Warning: The low junction temperature operating condition is not set. Assuming a default value of '0'." {  } {  } 0 0 "The %1!s! operating condition is not set. Assuming a default value of '%2!s!'." 0 0 "" 0}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 0 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EPM570GT100C3 " "Info: Device EPM570GT100C3 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "" 0}
{ "Warning" "WFIOMGR_PINS_MISSING_LOCATION_INFO" "25 25 " "Warning: No exact pin location assignment(s) for 25 pins of 25 total pins" { { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "mosi " "Info: Pin mosi not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { mosi } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 15 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { mosi } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { mosi } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "sclk " "Info: Pin sclk not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { sclk } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 16 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { sclk } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { sclk } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "ss\[0\] " "Info: Pin ss\[0\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { ss[0] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 17 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { ss[0] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { ss[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "ss\[1\] " "Info: Pin ss\[1\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { ss[1] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 17 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { ss[1] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { ss[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "ss\[2\] " "Info: Pin ss\[2\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { ss[2] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 17 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { ss[2] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { ss[2] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "ss\[3\] " "Info: Pin ss\[3\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { ss[3] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 17 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { ss[3] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { ss[3] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "ss\[4\] " "Info: Pin ss\[4\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { ss[4] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 17 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { ss[4] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { ss[4] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "ss\[5\] " "Info: Pin ss\[5\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { ss[5] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 17 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { ss[5] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { ss[5] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "ss\[6\] " "Info: Pin ss\[6\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { ss[6] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 17 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { ss[6] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { ss[6] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "ss\[7\] " "Info: Pin ss\[7\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { ss[7] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 17 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { ss[7] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { ss[7] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "data_bus\[0\] " "Info: Pin data_bus\[0\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { data_bus[0] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 8 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { data_bus[0] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { data_bus[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "data_bus\[1\] " "Info: Pin data_bus\[1\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { data_bus[1] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 8 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { data_bus[1] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { data_bus[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "data_bus\[2\] " "Info: Pin data_bus\[2\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { data_bus[2] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 8 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { data_bus[2] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { data_bus[2] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "data_bus\[3\] " "Info: Pin data_bus\[3\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { data_bus[3] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 8 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { data_bus[3] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { data_bus[3] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "data_bus\[4\] " "Info: Pin data_bus\[4\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { data_bus[4] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 8 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { data_bus[4] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { data_bus[4] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "data_bus\[5\] " "Info: Pin data_bus\[5\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { data_bus[5] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 8 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { data_bus[5] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { data_bus[5] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "data_bus\[6\] " "Info: Pin data_bus\[6\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { data_bus[6] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 8 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { data_bus[6] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { data_bus[6] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "data_bus\[7\] " "Info: Pin data_bus\[7\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { data_bus[7] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 8 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { data_bus[7] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { data_bus[7] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "pro_clk " "Info: Pin pro_clk not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { pro_clk } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 9 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { pro_clk } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { pro_clk } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "CS " "Info: Pin CS not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { CS } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 12 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { CS } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { CS } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "WR " "Info: Pin WR not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { WR } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 13 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { WR } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { WR } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "addr\[1\] " "Info: Pin addr\[1\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { addr[1] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 11 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { addr[1] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { addr[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "addr\[0\] " "Info: Pin addr\[0\] not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { addr[0] } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 11 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { addr[0] } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { addr[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "RD " "Info: Pin RD not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { RD } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 13 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { RD } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { RD } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "miso " "Info: Pin miso not assigned to an exact location on the device" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { miso } } } { "SPI_Master.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN485/quartus/SPI_Master.v" 10 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { miso } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { miso } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0}  } {  } 0 0 "No exact pin location assignment(s) for %1!d! pins of %2!d! total pins" 0 0 "" 0}
{ "Info" "ITDC_FITTER_TIMING_ENGINE" "Classic " "Info: Fitter is using the Classic Timing Analyzer" {  } {  } 0 0 "Fitter is using the %1!s! Timing Analyzer" 0 0 "" 0}
{ "Info" "ITAN_TDC_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" { { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "fmax 1000 MHz " "Info: Assuming a global fmax requirement of 1000 MHz" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0 "" 0} { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "tsu 2.0 ns " "Info: Assuming a global tsu requirement of 2.0 ns" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0 "" 0} { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "tco 1.0 ns " "Info: Assuming a global tco requirement of 1.0 ns" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0 "" 0} { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "tpd 1.0 ns " "Info: Assuming a global tpd requirement of 1.0 ns" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0 "" 0}  } {  } 0 0 "Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" 0 0 "" 0}