sinout.map.rpt

基于MATLAB/DSP Ｂuild可控信号发生器

    Info: Found design unit 20: SUsgn-SUsgn_SYNTH
    Info: Found design unit 21: SShiftTap-a
    Info: Found design unit 22: MultAdd-MultAdd_synth
    Info: Found design unit 23: AltMultConst-AltMultConst_synth
    Info: Found design unit 24: AltiSMac-AltiSMac_synth
    Info: Found design unit 25: signaltapunit-a
    Info: Found design unit 26: AltiSMacUsg-AltiSMacUsg_synth
    Info: Found design unit 27: CplxMult-CplxMult_synth
    Info: Found design unit 28: Par2Ser-Par2Ser_SYNTH
    Info: Found design unit 29: Ser2Par-Ser2Par_SYNTH
    Info: Found design unit 30: divider-syn
    Info: Found design unit 31: ButterFly-ButterFly_synth
    Info: Found design unit 32: sLpmAddSub-SYN
    Info: Found design unit 33: sLpmCount-SYN
    Info: Found design unit 34: sIntegratorAltr-SYN
    Info: Found design unit 35: sDifferentiatorAltr-SYN
    Info: Found design unit 36: sFir4TapCoefSerialAltr-SYN
    Info: Found design unit 37: sFir4TapCoefParAltr-syn
    Info: Found design unit 38: sFir2TapCoefParAltr-syn
    Info: Found design unit 39: sdecoderaltr-syn
    Info: Found design unit 40: sCFifoAltr-SYN
    Info: Found design unit 41: DFFEALTR-SYN
    Info: Found design unit 42: TFFEALTR-SYN
    Info: Found design unit 43: BarrelShiftAltr-SYNTH
    Info: Found design unit 44: BarrelShiftAltrUsg-SYNTH
    Info: Found design unit 45: sLFSRAltr-SYNTH
    Info: Found design unit 46: sMultiBitAddSub-synth
    Info: Found design unit 47: sMultAltr-synth
    Info: Found design unit 48: sBitWiseBusOpaltr-synth
    Info: Found entity 1: AROUND
    Info: Found entity 2: sRounderAltr
    Info: Found entity 3: ASAT
    Info: Found entity 4: ASATPIPE
    Info: Found entity 5: seq
    Info: Found entity 6: SBF
    Info: Found entity 7: SRED
    Info: Found entity 8: Upsample
    Info: Found entity 9: SDownSampleAltr
    Info: Found entity 10: SDelay
    Info: Found entity 11: SBitLogical
    Info: Found entity 12: SBusLogical
    Info: Found entity 13: AltiMult
    Info: Found entity 14: SAdderSub
    Info: Found entity 15: IncDec
    Info: Found entity 16: comparator
    Info: Found entity 17: sync_dpram_single_clock
    Info: Found entity 18: SDpram
    Info: Found entity 19: SLRom
    Info: Found entity 20: SUsgn
    Info: Found entity 21: SShiftTap
    Info: Found entity 22: MultAdd
    Info: Found entity 23: AltMultConst
    Info: Found entity 24: AltiSMac
    Info: Found entity 25: signaltapunit
    Info: Found entity 26: AltiSMacUsg
    Info: Found entity 27: CplxMult
    Info: Found entity 28: Par2Ser
    Info: Found entity 29: Ser2Par
    Info: Found entity 30: divider
    Info: Found entity 31: ButterFly
    Info: Found entity 32: sLpmAddSub
    Info: Found entity 33: sLpmCount
    Info: Found entity 34: sIntegratorAltr
    Info: Found entity 35: sDifferentiatorAltr
    Info: Found entity 36: sFir4TapCoefSerialAltr
    Info: Found entity 37: sFir4TapCoefParAltr
    Info: Found entity 38: sFir2TapCoefParAltr
    Info: Found entity 39: sdecoderaltr
    Info: Found entity 40: sCFifoAltr
    Info: Found entity 41: DFFEALTR
    Info: Found entity 42: TFFEALTR
    Info: Found entity 43: BarrelShiftAltr
    Info: Found entity 44: BarrelShiftAltrUsg
    Info: Found entity 45: sLFSRAltr
    Info: Found entity 46: sMultiBitAddSub
    Info: Found entity 47: sMultAltr
    Info: Found entity 48: sBitWiseBusOpaltr
Warning: Can't analyze file -- file D:/simulink/Sinout.vhd is missing
Warning: Using design file Sinout.vhd, which is not specified as a design file for the current project, but contains definitions for 2 design units and 1 entities in project
    Info: Found design unit 1: Sinout-aDspBuilder
    Info: Found entity 1: Sinout
Info: Elaborating entity "Sinout" for the top level hierarchy
Info (10544): VHDL Assertion Statement information at Sinout.vhd(53): assertion "" DSP Builder - Quartus II development tool and MATLAB/Simulink Interface - Version 2.1.3 - Build 31"" is always false
Info: Elaborating entity "SBF" for hierarchy "SBF:SinOuti"
Info: Elaborating entity "SDelay" for hierarchy "SDelay:Delayi"
Info: Elaborating entity "IncDec" for hierarchy "IncDec:IncCounti"
Info: Elaborating entity "AltiMult" for hierarchy "AltiMult:Product1i"
Warning: Reduced register "SDelay:Delayi|result[8]" with stuck data_in port to stuck value GND
Info: Found 1 design units, including 1 entities, in source file c:/altera/quartus60/libraries/megafunctions/lpm_mult.tdf
    Info: Found entity 1: lpm_mult
Info: Elaborated megafunction instantiation "AltiMult:Product1i|lpm_mult:Mult0"
Info: Found 1 design units, including 1 entities, in source file c:/altera/quartus60/libraries/megafunctions/multcore.tdf
    Info: Found entity 1: multcore
Info: Elaborated megafunction instantiation "AltiMult:Product1i|lpm_mult:Mult0|multcore:mult_core", which is child of megafunction instantiation "AltiMult:Product1i|lpm_mult:Mult0"
Info: Instantiated megafunction "AltiMult:Product1i|lpm_mult:Mult0" with the following parameter:
    Info: Parameter "LPM_WIDTHA" = "8"
    Info: Parameter "LPM_WIDTHB" = "1"
    Info: Parameter "LPM_WIDTHP" = "9"
    Info: Parameter "LPM_WIDTHR" = "9"
    Info: Parameter "LPM_WIDTHS" = "1"
    Info: Parameter "LPM_REPRESENTATION" = "SIGNED"
    Info: Parameter "INPUT_A_IS_CONSTANT" = "NO"
    Info: Parameter "INPUT_B_IS_CONSTANT" = "NO"
    Info: Parameter "MAXIMIZE_SPEED" = "5"
    Info: Parameter "DEDICATED_MULTIPLIER_CIRCUITRY" = "AUTO"
Info: Found 1 design units, including 1 entities, in source file c:/altera/quartus60/libraries/megafunctions/lpm_add_sub.tdf
    Info: Found entity 1: lpm_add_sub
Info: Elaborated megafunction instantiation "AltiMult:Product1i|lpm_mult:Mult0|multcore:mult_core|lpm_add_sub:adder", which is child of megafunction instantiation "AltiMult:Product1i|lpm_mult:Mult0"
Info: Instantiated megafunction "AltiMult:Product1i|lpm_mult:Mult0" with the following parameter:
    Info: Parameter "LPM_WIDTHA" = "8"
    Info: Parameter "LPM_WIDTHB" = "1"
    Info: Parameter "LPM_WIDTHP" = "9"
    Info: Parameter "LPM_WIDTHR" = "9"
    Info: Parameter "LPM_WIDTHS" = "1"
    Info: Parameter "LPM_REPRESENTATION" = "SIGNED"
    Info: Parameter "INPUT_A_IS_CONSTANT" = "NO"
    Info: Parameter "INPUT_B_IS_CONSTANT" = "NO"
    Info: Parameter "MAXIMIZE_SPEED" = "5"
    Info: Parameter "DEDICATED_MULTIPLIER_CIRCUITRY" = "AUTO"
Info: Found 1 design units, including 1 entities, in source file c:/altera/quartus60/libraries/megafunctions/addcore.tdf
    Info: Found entity 1: addcore
Info: Elaborated megafunction instantiation "AltiMult:Product1i|lpm_mult:Mult0|multcore:mult_core|lpm_add_sub:adder|addcore:adder", which is child of megafunction instantiation "AltiMult:Product1i|lpm_mult:Mult0"
Info: Instantiated megafunction "AltiMult:Product1i|lpm_mult:Mult0" with the following parameter:
    Info: Parameter "LPM_WIDTHA" = "8"
    Info: Parameter "LPM_WIDTHB" = "1"
    Info: Parameter "LPM_WIDTHP" = "9"
    Info: Parameter "LPM_WIDTHR" = "9"
    Info: Parameter "LPM_WIDTHS" = "1"
    Info: Parameter "LPM_REPRESENTATION" = "SIGNED"
    Info: Parameter "INPUT_A_IS_CONSTANT" = "NO"
    Info: Parameter "INPUT_B_IS_CONSTANT" = "NO"
    Info: Parameter "MAXIMIZE_SPEED" = "5"
    Info: Parameter "DEDICATED_MULTIPLIER_CIRCUITRY" = "AUTO"
Info: Found 1 design units, including 1 entities, in source file c:/altera/quartus60/libraries/megafunctions/a_csnbuffer.tdf
    Info: Found entity 1: a_csnbuffer
Info: Elaborated megafunction instantiation "AltiMult:Product1i|lpm_mult:Mult0|multcore:mult_core|lpm_add_sub:adder|addcore:adder|a_csnbuffer:oflow_node", which is child of megafunction instantiation "AltiMult:Product1i|lpm_mult:Mult0"
Info: Instantiated megafunction "AltiMult:Product1i|lpm_mult:Mult0" with the following parameter:
    Info: Parameter "LPM_WIDTHA" = "8"
    Info: Parameter "LPM_WIDTHB" = "1"
    Info: Parameter "LPM_WIDTHP" = "9"
    Info: Parameter "LPM_WIDTHR" = "9"
    Info: Parameter "LPM_WIDTHS" = "1"
    Info: Parameter "LPM_REPRESENTATION" = "SIGNED"
    Info: Parameter "INPUT_A_IS_CONSTANT" = "NO"
    Info: Parameter "INPUT_B_IS_CONSTANT" = "NO"
    Info: Parameter "MAXIMIZE_SPEED" = "5"
    Info: Parameter "DEDICATED_MULTIPLIER_CIRCUITRY" = "AUTO"
Info: Elaborated megafunction instantiation "AltiMult:Product1i|lpm_mult:Mult0|multcore:mult_core|lpm_add_sub:adder|addcore:adder|a_csnbuffer:result_node", which is child of megafunction instantiation "AltiMult:Product1i|lpm_mult:Mult0"
Info: Instantiated megafunction "AltiMult:Product1i|lpm_mult:Mult0" with the following parameter:
    Info: Parameter "LPM_WIDTHA" = "8"
    Info: Parameter "LPM_WIDTHB" = "1"
    Info: Parameter "LPM_WIDTHP" = "9"
    Info: Parameter "LPM_WIDTHR" = "9"
    Info: Parameter "LPM_WIDTHS" = "1"
    Info: Parameter "LPM_REPRESENTATION" = "SIGNED"
    Info: Parameter "INPUT_A_IS_CONSTANT" = "NO"
    Info: Parameter "INPUT_B_IS_CONSTANT" = "NO"
    Info: Parameter "MAXIMIZE_SPEED" = "5"
    Info: Parameter "DEDICATED_MULTIPLIER_CIRCUITRY" = "AUTO"
Info: Found 1 design units, including 1 entities, in source file c:/altera/quartus60/libraries/megafunctions/altshift.tdf
    Info: Found entity 1: altshift
Info: Elaborated megafunction instantiation "AltiMult:Product1i|lpm_mult:Mult0|multcore:mult_core|lpm_add_sub:adder|altshift:result_ext_latency_ffs", which is child of megafunction instantiation "AltiMult:Product1i|lpm_mult:Mult0"
Info: Instantiated megafunction "AltiMult:Product1i|lpm_mult:Mult0" with the following parameter:
    Info: Parameter "LPM_WIDTHA" = "8"
    Info: Parameter "LPM_WIDTHB" = "1"
    Info: Parameter "LPM_WIDTHP" = "9"
    Info: Parameter "LPM_WIDTHR" = "9"
    Info: Parameter "LPM_WIDTHS" = "1"
    Info: Parameter "LPM_REPRESENTATION" = "SIGNED"
    Info: Parameter "INPUT_A_IS_CONSTANT" = "NO"
    Info: Parameter "INPUT_B_IS_CONSTANT" = "NO"
    Info: Parameter "MAXIMIZE_SPEED" = "5"
    Info: Parameter "DEDICATED_MULTIPLIER_CIRCUITRY" = "AUTO"
Info: Elaborated megafunction instantiation "AltiMult:Product1i|lpm_mult:Mult0|multcore:mult_core|lpm_add_sub:adder|altshift:carry_ext_latency_ffs", which is child of megafunction instantiation "AltiMult:Product1i|lpm_mult:Mult0"
Info: Instantiated megafunction "AltiMult:Product1i|lpm_mult:Mult0" with the following parameter:
    Info: Parameter "LPM_WIDTHA" = "8"
    Info: Parameter "LPM_WIDTHB" = "1"
    Info: Parameter "LPM_WIDTHP" = "9"
    Info: Parameter "LPM_WIDTHR" = "9"
    Info: Parameter "LPM_WIDTHS" = "1"
    Info: Parameter "LPM_REPRESENTATION" = "SIGNED"
    Info: Parameter "INPUT_A_IS_CONSTANT" = "NO"
    Info: Parameter "INPUT_B_IS_CONSTANT" = "NO"
    Info: Parameter "MAXIMIZE_SPEED" = "5"
    Info: Parameter "DEDICATED_MULTIPLIER_CIRCUITRY" = "AUTO"
Info: Implemented 65 device resources after synthesis - the final resource count might be different
    Info: Implemented 3 input pins
    Info: Implemented 8 output pins
    Info: Implemented 54 logic cells
Info: Quartus II Analysis & Synthesis was successful. 0 errors, 3 warnings
    Info: Processing ended: Mon Mar 31 10:01:21 2008
    Info: Elapsed time: 00:00:04