ztja.fit

在maxplusII上用VHDL语言编程实现的数字基带信号的同步提取

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 09/07/2007 16:15:36      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "ztja"
BEGIN

    DEVICE = "EP1K30QC208-3";

    "en"                           : INPUT_PIN  = 79     ;
    "keyin0"                       : INPUT_PIN  = 14     ;
    "keyin1"                       : INPUT_PIN  = 141    ;
    "keyin2"                       : INPUT_PIN  = 12     ;
    "keyin3"                       : INPUT_PIN  = 96     ;
    "keyin4"                       : INPUT_PIN  = 168    ;
    "keyin5"                       : INPUT_PIN  = 179    ;
    "keyin6"                       : INPUT_PIN  = 139    ;
    "keyin7"                       : INPUT_PIN  = 143    ;
    "keyin8"                       : INPUT_PIN  = 13     ;
    "keyin9"                       : INPUT_PIN  = 142    ;
    "keyin10"                      : INPUT_PIN  = 182    ;
    "keyin11"                      : INPUT_PIN  = 90     ;
    "keyin12"                      : INPUT_PIN  = 167    ;
    "keyin13"                      : INPUT_PIN  = 163    ;
    "keyin14"                      : INPUT_PIN  = 161    ;
    "keyin15"                      : INPUT_PIN  = 80     ;
    "keyin16"                      : INPUT_PIN  = 162    ;
    "keyin17"                      : INPUT_PIN  = 15     ;
    "keyin18"                      : INPUT_PIN  = 180    ;
    "keyin19"                      : INPUT_PIN  = 93     ;
    "keyin20"                      : INPUT_PIN  = 144    ;
    "keyin21"                      : INPUT_PIN  = 164    ;
    "keyin22"                      : INPUT_PIN  = 174    ;
    "keyin23"                      : INPUT_PIN  = 102    ;
    "keyin24"                      : INPUT_PIN  = 86     ;
    "keyin25"                      : INPUT_PIN  = 88     ;
    "keyin26"                      : INPUT_PIN  = 183    ;
    "keyin27"                      : INPUT_PIN  = 103    ;
    "keyin28"                      : INPUT_PIN  = 140    ;
    "keyin29"                      : INPUT_PIN  = 97     ;
    "keyin30"                      : INPUT_PIN  = 160    ;
    "keyin31"                      : INPUT_PIN  = 184    ;
    "keyvalue0"                    : INPUT_PIN  = 19     ;
    "keyvalue1"                    : INPUT_PIN  = 17     ;
    "keyvalue2"                    : INPUT_PIN  = 18     ;
    "keyvalue3"                    : INPUT_PIN  = 132    ;
    "reset"                        : INPUT_PIN  = 78     ;
    "clr"                          : OUTPUT_PIN = 134    ;
    "keyout1"                      : OUTPUT_PIN = 133    ;
    "keyout2"                      : OUTPUT_PIN = 24     ;
    "keyout3"                      : OUTPUT_PIN = 135    ;
    "keyout4"                      : OUTPUT_PIN = 131    ;
    "z"                            : OUTPUT_PIN = 136    ;
    "m_state~1"                    : LOCATION   = LC1_C15;
    "m_state~1~2"                  : LOCATION   = LC3_C15;
    "m_state~2"                    : LOCATION   = LC7_C3 ;
    "m_state~3"                    : LOCATION   = LC2_C3 ;
    "m_state~4"                    : LOCATION   = LC8_C13;
    "m_state~5"                    : LOCATION   = LC5_C3 ;
    ":44"                          : LOCATION   = LC4_C3 ;
    ":46"                          : LOCATION   = LC4_B15;  -- b31
    ":47"                          : LOCATION   = LC5_B7 ;  -- b30
    ":48"                          : LOCATION   = LC5_B15;  -- b29
    ":49"                          : LOCATION   = LC1_B15;  -- b28
    ":50"                          : LOCATION   = LC3_B1 ;  -- b27
    ":51"                          : LOCATION   = LC2_B15;  -- b26
    ":52"                          : LOCATION   = LC8_B15;  -- b25
    ":53"                          : LOCATION   = LC7_B15;  -- b24
    ":54"                          : LOCATION   = LC4_B7 ;  -- b23
    ":55"                          : LOCATION   = LC3_B7 ;  -- b22
    ":56"                          : LOCATION   = LC8_B13;  -- b21
    ":57"                          : LOCATION   = LC7_B13;  -- b20
    ":58"                          : LOCATION   = LC8_B7 ;  -- b19
    ":59"                          : LOCATION   = LC6_B7 ;  -- b18
    ":60"                          : LOCATION   = LC4_B1 ;  -- b17
    ":61"                          : LOCATION   = LC1_B8 ;  -- b16
    ":62"                          : LOCATION   = LC8_B11;  -- b15
    ":63"                          : LOCATION   = LC5_B8 ;  -- b14
    ":64"                          : LOCATION   = LC7_B8 ;  -- b13
    ":65"                          : LOCATION   = LC6_B8 ;  -- b12
    ":66"                          : LOCATION   = LC6_B13;  -- b11
    ":67"                          : LOCATION   = LC4_B11;  -- b10
    ":68"                          : LOCATION   = LC3_B14;  -- b9
    ":69"                          : LOCATION   = LC2_B14;  -- b8
    ":70"                          : LOCATION   = LC4_B8 ;  -- b7
    ":71"                          : LOCATION   = LC2_B11;  -- b6
    ":72"                          : LOCATION   = LC7_B11;  -- b5
    ":73"                          : LOCATION   = LC6_B11;  -- b4
    ":74"                          : LOCATION   = LC5_B13;  -- b3
    ":75"                          : LOCATION   = LC2_B13;  -- b2
    ":76"                          : LOCATION   = LC2_B1 ;  -- b1
    ":77"                          : LOCATION   = LC5_B11;  -- b0
    ":365"                         : LOCATION   = LC6_C15;
    ":510"                         : LOCATION   = LC1_B14;
    "~510~1"                       : LOCATION   = LC4_B14;
    "~510~2"                       : LOCATION   = LC2_B8 ;
    "~510~3"                       : LOCATION   = LC8_B8 ;
    "~510~4"                       : LOCATION   = LC3_B8 ;
    "~510~5"                       : LOCATION   = LC5_B14;
    "~510~6"                       : LOCATION   = LC1_B11;
    "~510~7"                       : LOCATION   = LC3_B11;
    "~510~8"                       : LOCATION   = LC1_B13;
    "~510~9"                       : LOCATION   = LC4_B13;
    "~510~10"                      : LOCATION   = LC6_B14;
    "~510~11"                      : LOCATION   = LC2_B7 ;
    "~510~12"                      : LOCATION   = LC1_B7 ;
    "~510~13"                      : LOCATION   = LC3_B15;
    "~510~14"                      : LOCATION   = LC7_B1 ;
    "~510~15"                      : LOCATION   = LC7_B14;
    "~510~16"                      : LOCATION   = LC3_B13;
    "~510~17"                      : LOCATION   = LC7_B7 ;
    "~510~18"                      : LOCATION   = LC1_B1 ;
    "~510~19"                      : LOCATION   = LC6_B15;
    "~510~20"                      : LOCATION   = LC8_B14;
    ":627"                         : LOCATION   = LC2_C15;
    ":749"                         : LOCATION   = LC5_C15;
    "~1293~1"                      : LOCATION   = LC1_C3 ;
    "~1310~1"                      : LOCATION   = LC3_C3 ;
    "~1321~1"                      : LOCATION   = LC8_C15;
    "~1323~1"                      : LOCATION   = LC7_C15;
    "~1330~1"                      : LOCATION   = LC4_C15;
    "~1330~2"                      : LOCATION   = LC6_C3 ;
    "~1330~3"                      : LOCATION   = LC8_C3 ;

END;