📄 rw_sd_mach.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 01/24/2008 21:35:49
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "rw_sd_mach"
BEGIN
DEVICE = "EPF10K10TC144-3";
"ch_addr0" : INPUT_PIN = 126 ;
"ch_addr1" : INPUT_PIN = 125 ;
"ch_addr2" : INPUT_PIN = 29 ;
"ch_addr3" : INPUT_PIN = 114 ;
"ch_addr4" : INPUT_PIN = 33 ;
"ch_addr5" : INPUT_PIN = 120 ;
"ch_addr6" : INPUT_PIN = 28 ;
"ch_addr7" : INPUT_PIN = 67 ;
"ch_addr8" : INPUT_PIN = 49 ;
"ch_addr9" : INPUT_PIN = 13 ;
"ch_addr10" : INPUT_PIN = 11 ;
"ch_addr11" : INPUT_PIN = 96 ;
"ch_addr12" : INPUT_PIN = 47 ;
"ch_addr13" : INPUT_PIN = 41 ;
"ch_addr14" : INPUT_PIN = 19 ;
"ch_addr15" : INPUT_PIN = 111 ;
"ch_addr16" : INPUT_PIN = 91 ;
"ch_addr17" : INPUT_PIN = 22 ;
"ch_addr18" : INPUT_PIN = 21 ;
"ch_addr19" : INPUT_PIN = 137 ;
"ch_addr20" : INPUT_PIN = 89 ;
"ch_num0" : INPUT_PIN = 109 ;
"ch_num1" : INPUT_PIN = 82 ;
"ch_num2" : INPUT_PIN = 26 ;
"ch_num3" : INPUT_PIN = 30 ;
"ch_num4" : INPUT_PIN = 27 ;
"ch_num5" : INPUT_PIN = 112 ;
"ch_num6" : INPUT_PIN = 32 ;
"ch_num7" : INPUT_PIN = 31 ;
"ch_req" : INPUT_PIN = 140 ;
"ch_rw" : INPUT_PIN = 56 ;
"clk" : INPUT_PIN = 55 ;
"data_cycle" : INPUT_PIN = 54 ;
"sdram_setup" : INPUT_PIN = 143 ;
"state_cntr0" : INPUT_PIN = 124 ;
"add0" : OUTPUT_PIN = 17 ;
"add1" : OUTPUT_PIN = 88 ;
"add2" : OUTPUT_PIN = 87 ;
"add3" : OUTPUT_PIN = 8 ;
"add4" : OUTPUT_PIN = 80 ;
"add5" : OUTPUT_PIN = 83 ;
"add6" : OUTPUT_PIN = 78 ;
"add7" : OUTPUT_PIN = 121 ;
"add8" : OUTPUT_PIN = 64 ;
"add9" : OUTPUT_PIN = 70 ;
"add10" : OUTPUT_PIN = 117 ;
"add11" : OUTPUT_PIN = 79 ;
"add12" : OUTPUT_PIN = 12 ;
"add13" : OUTPUT_PIN = 135 ;
"add14" : OUTPUT_PIN = 7 ;
"add15" : OUTPUT_PIN = 10 ;
"add16" : OUTPUT_PIN = 14 ;
"add17" : OUTPUT_PIN = 136 ;
"add18" : OUTPUT_PIN = 86 ;
"add19" : OUTPUT_PIN = 90 ;
"add20" : OUTPUT_PIN = 92 ;
"add21" : OUTPUT_PIN = 18 ;
"add22" : OUTPUT_PIN = 23 ;
"add23" : OUTPUT_PIN = 46 ;
"add24" : OUTPUT_PIN = 20 ;
"ch_ack" : OUTPUT_PIN = 81 ;
"data_req" : OUTPUT_PIN = 9 ;
"dp_addr0" : OUTPUT_PIN = 59 ;
"dp_addr1" : OUTPUT_PIN = 122 ;
"dp_addr2" : OUTPUT_PIN = 99 ;
"dp_addr3" : OUTPUT_PIN = 63 ;
"dp_addr4" : OUTPUT_PIN = 98 ;
"dp_addr5" : OUTPUT_PIN = 97 ;
"dp_addr6" : OUTPUT_PIN = 101 ;
"dp_addr7" : OUTPUT_PIN = 95 ;
"dp_rden" : OUTPUT_PIN = 73 ;
"dp_wren" : OUTPUT_PIN = 100 ;
"rs_ready" : OUTPUT_PIN = 68 ;
"wr_l" : OUTPUT_PIN = 102 ;
"|lpm_add_sub:410|addcore:adder|:121" : LOCATION = LC3_C11;
"|lpm_add_sub:410|addcore:adder|:125" : LOCATION = LC5_C11;
"|lpm_add_sub:410|addcore:adder|:129" : LOCATION = LC1_C11;
"|lpm_add_sub:410|addcore:adder|:133" : LOCATION = LC4_C1 ;
"|lpm_add_sub:410|addcore:adder|:137" : LOCATION = LC7_C1 ;
"|lpm_add_sub:410|addcore:adder|:141" : LOCATION = LC1_C1 ;
"|lpm_add_sub:411|addcore:adder|:121" : LOCATION = LC7_A12;
"|lpm_add_sub:411|addcore:adder|:129" : LOCATION = LC1_A12;
"|lpm_add_sub:411|addcore:adder|:137" : LOCATION = LC7_A1 ;
"|lpm_add_sub:412|addcore:adder|:155" : LOCATION = LC2_C9 ;
"|lpm_add_sub:412|addcore:adder|:159" : LOCATION = LC5_C9 ;
"|lpm_add_sub:412|addcore:adder|:163" : LOCATION = LC6_C9 ;
"|lpm_add_sub:412|addcore:adder|:167" : LOCATION = LC4_C9 ;
"|lpm_add_sub:412|addcore:adder|:171" : LOCATION = LC1_C6 ;
"|lpm_add_sub:412|addcore:adder|:175" : LOCATION = LC6_C6 ;
"|lpm_add_sub:412|addcore:adder|:179" : LOCATION = LC3_C6 ;
"|lpm_add_sub:412|addcore:adder|:183" : LOCATION = LC3_A17;
"|lpm_add_sub:412|addcore:adder|:187" : LOCATION = LC5_A17;
"|lpm_add_sub:412|addcore:adder|:191" : LOCATION = LC4_A17;
"|lpm_add_sub:412|addcore:adder|:195" : LOCATION = LC6_A19;
"|lpm_add_sub:412|addcore:adder|:199" : LOCATION = LC7_A19;
"|lpm_add_sub:412|addcore:adder|:203" : LOCATION = LC3_A19;
"|lpm_add_sub:412|addcore:adder|:207" : LOCATION = LC2_B10;
"|lpm_add_sub:412|addcore:adder|:211" : LOCATION = LC4_B10;
"|lpm_add_sub:412|addcore:adder|:215" : LOCATION = LC5_B10;
"|lpm_add_sub:412|addcore:adder|:219" : LOCATION = LC5_B17;
"|lpm_add_sub:412|addcore:adder|:223" : LOCATION = LC6_B17;
"|lpm_add_sub:412|addcore:adder|:227" : LOCATION = LC8_B17;
"wr_l~1" : LOCATION = LC1_A7 ;
":91" : LOCATION = LC4_C3 ; -- op_en
":96" : LOCATION = LC7_C3 ;
":100" : LOCATION = LC6_C3 ; -- op_active
":102" : LOCATION = LC1_C8 ;
":176" : LOCATION = LC1_C3 ; -- op_num7
":177" : LOCATION = LC5_C1 ; -- op_num6
":178" : LOCATION = LC6_C1 ; -- op_num5
":179" : LOCATION = LC3_C1 ; -- op_num4
":180" : LOCATION = LC6_C11; -- op_num3
":181" : LOCATION = LC4_C11; -- op_num2
":182" : LOCATION = LC2_C3 ; -- op_num1
":183" : LOCATION = LC8_C3 ; -- op_num0
":189" : LOCATION = LC1_C2 ;
":194" : LOCATION = LC2_C1 ;
":199" : LOCATION = LC8_C1 ;
":204" : LOCATION = LC2_C11;
":209" : LOCATION = LC8_C11;
":214" : LOCATION = LC7_C11;
"~222~1" : LOCATION = LC5_C3 ;
":228" : LOCATION = LC3_C3 ; -- op_over
":231" : LOCATION = LC5_A1 ;
":236" : LOCATION = LC2_C8 ;
":265" : LOCATION = LC4_A1 ; -- rs_ready_delay4
":266" : LOCATION = LC1_A1 ; -- rs_ready_delay3
":267" : LOCATION = LC2_A17; -- rs_ready_delay2
":268" : LOCATION = LC7_A17; -- rs_ready_delay1
":269" : LOCATION = LC1_A19; -- rs_ready_delay0
":270" : LOCATION = LC3_A1 ;
":272" : LOCATION = LC6_A1 ;
":298" : LOCATION = LC8_A1 ;
":299" : LOCATION = LC2_A1 ;
":300" : LOCATION = LC6_A12;
":301" : LOCATION = LC8_A12;
":302" : LOCATION = LC3_A12;
":303" : LOCATION = LC4_A12;
":304" : LOCATION = LC2_A12;
":305" : LOCATION = LC5_A12;
":306" : LOCATION = LC3_A21;
":384" : LOCATION = LC4_B17;
":385" : LOCATION = LC3_B17;
":386" : LOCATION = LC7_B17;
":387" : LOCATION = LC2_B17;
":388" : LOCATION = LC1_B10;
":389" : LOCATION = LC3_B10;
":390" : LOCATION = LC8_B10;
":391" : LOCATION = LC5_A19;
":392" : LOCATION = LC8_A19;
":393" : LOCATION = LC4_A19;
":394" : LOCATION = LC1_A17;
":395" : LOCATION = LC8_A17;
":396" : LOCATION = LC6_A17;
":397" : LOCATION = LC5_C6 ;
":398" : LOCATION = LC8_C6 ;
":399" : LOCATION = LC2_C6 ;
":400" : LOCATION = LC3_C9 ;
":401" : LOCATION = LC8_C9 ;
":402" : LOCATION = LC7_C9 ;
":403" : LOCATION = LC1_C9 ;
":404" : LOCATION = LC4_C6 ;
":405" : LOCATION = LC2_A19;
":406" : LOCATION = LC7_B10;
":407" : LOCATION = LC6_B10;
":408" : LOCATION = LC1_B17;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -