heater.opt

基于Keil uVision2平台的C51控制温度老化试验箱的源代码。 1、温度传感器采集温度 2、传感器信号传入 ADC电路 3、经AT89C52单片机的处理分析输出控制 4、通过继电器控制

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Target 1), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0
GRPOPT 2,(Head Group 2),1,0,0

OPTFFF 1,1,1,939524096,0,448,448,0,<.\main.c><main.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,227,255,255,255,0,0,0,0,0,0,0,0,146,3,0,0,188,1,0,0 }
OPTFFF 1,2,1,335544320,0,1,1,0,<.\ad.c><ad.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,154,0,0,0,189,0,0,0,48,4,0,0,124,2,0,0 }
OPTFFF 1,3,1,905969664,0,79,79,0,<.\lcd.c><lcd.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,132,0,0,0,162,0,0,0,26,4,0,0,97,2,0,0 }
OPTFFF 1,4,1,0,0,15,15,0,<.\key.c><key.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,44,0,0,0,54,0,0,0,194,3,0,0,245,1,0,0 }
OPTFFF 1,5,1,822083584,0,117,117,0,<.\eep.C><eep.C> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,176,0,0,0,216,0,0,0,70,4,0,0,151,2,0,0 }
OPTFFF 2,6,5,0,0,1,18,0,<.\main.h><main.h> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,110,0,0,0,135,0,0,0,4,4,0,0,70,2,0,0 }
OPTFFF 2,7,5,0,0,1,19,0,<.\ad.h><ad.h> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,88,0,0,0,108,0,0,0,238,3,0,0,43,2,0,0 }
OPTFFF 2,8,5,0,0,1,1,0,<.\key.h><key.h> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,22,0,0,0,27,0,0,0,172,3,0,0,218,1,0,0 }
OPTFFF 2,9,5,0,0,1,22,0,<.\lcd.h><lcd.h> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,66,0,0,0,81,0,0,0,216,3,0,0,16,2,0,0 }
OPTFFF 2,10,5,2,0,1,7,0,<.\eep.H><eep.H> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,0,0,0,0,0,0,0,0,150,3,0,0,191,1,0,0 }

ExtF <.\main.h> 1,18,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,110,0,0,0,135,0,0,0,4,4,0,0,70,2,0,0 }
ExtF <.\ad.h> 1,19,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,88,0,0,0,108,0,0,0,238,3,0,0,43,2,0,0 }
ExtF <.\key.h> 1,1,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,22,0,0,0,27,0,0,0,172,3,0,0,218,1,0,0 }
ExtF <.\lcd.h> 1,22,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,66,0,0,0,81,0,0,0,216,3,0,0,16,2,0,0 }
ExtF <.\eep.H> 1,7,0,{ 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,228,255,255,255,0,0,0,0,0,0,0,0,150,3,0,0,191,1,0,0 }

TARGOPT 1, (Target 1)
 CLK51=24000000
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Data Sheet)<DATASHTS\ATMEL\DOC0313.PDF>
  OPTBL 1,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 2,(Instruction Set Manual)<DATASHTS\ATMEL\DOC0509.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-p52)(S8051.DLL)()(TP51.DLL)(-p52)
  OPTDBG 1021,-1,()()()()()()()()()() (BIN\MON51.DLL)()()()
  OPTDF 0x0
  OPTLE <>
  OPTLC <>
EndOpt