jsq_d.fit

VHDL计数器功能从００００到ffff记数

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 10/22/2007 18:53:14      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "jsq_d"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "clk1"                         : INPUT_PIN  = 43     ;
    "rst"                          : INPUT_PIN  = 2      ;
    "nq0"                          : OUTPUT_PIN = 23     ;
    "nq1"                          : OUTPUT_PIN = 6      ;
    "nq2"                          : OUTPUT_PIN = 30     ;
    "nq3"                          : OUTPUT_PIN = 39     ;
    "q0"                           : OUTPUT_PIN = 22     ;
    "q1"                           : OUTPUT_PIN = 8      ;
    "q2"                           : OUTPUT_PIN = 27     ;
    "q3"                           : OUTPUT_PIN = 61     ;
    "sm0"                          : OUTPUT_PIN = 64     ;
    "sm1"                          : OUTPUT_PIN = 73     ;
    "sm2"                          : OUTPUT_PIN = 24     ;
    "sm3"                          : OUTPUT_PIN = 58     ;
    "sm_10"                        : OUTPUT_PIN = 65     ;
    "sm_11"                        : OUTPUT_PIN = 71     ;
    "sm_12"                        : OUTPUT_PIN = 28     ;
    "sm_13"                        : OUTPUT_PIN = 83     ;
    "sm_20"                        : OUTPUT_PIN = 66     ;
    "sm_21"                        : OUTPUT_PIN = 72     ;
    "sm_22"                        : OUTPUT_PIN = 29     ;
    "sm_23"                        : OUTPUT_PIN = 60     ;
    "sm_30"                        : OUTPUT_PIN = 67     ;
    "sm_31"                        : OUTPUT_PIN = 69     ;
    "sm_32"                        : OUTPUT_PIN = 7      ;
    "sm_33"                        : OUTPUT_PIN = 47     ;
    "|dffl:u1|:6"                  : LOCATION   = LC2_B4 ;  -- |dffl:u1|q1
    "|dffl:u1|:7"                  : LOCATION   = LC3_B4 ;  -- |dffl:u1|nq1
    "|dffl:u2|:6"                  : LOCATION   = LC6_B4 ;  -- |dffl:u2|q1
    "|dffl:u2|:7"                  : LOCATION   = LC1_B4 ;  -- |dffl:u2|nq1
    "|dffl:u3|:6"                  : LOCATION   = LC1_C12;  -- |dffl:u3|q1
    "|dffl:u3|:7"                  : LOCATION   = LC6_C12;  -- |dffl:u3|nq1
    "|dffl:u4|:6"                  : LOCATION   = LC3_C12;  -- |dffl:u4|q1
    "|dffl:u4|:7"                  : LOCATION   = LC2_C12;  -- |dffl:u4|nq1
    ":12"                          : LOCATION   = LC6_C14;
    ":14"                          : LOCATION   = LC6_C4 ;
    ":16"                          : LOCATION   = LC1_A20;
    ":18"                          : LOCATION   = LC7_B13;
    ":20"                          : LOCATION   = LC5_C14;
    ":22"                          : LOCATION   = LC2_C4 ;
    ":24"                          : LOCATION   = LC3_A20;
    ":26"                          : LOCATION   = LC5_B13;
    ":28"                          : LOCATION   = LC4_C14;
    ":30"                          : LOCATION   = LC5_C4 ;
    ":32"                          : LOCATION   = LC2_A20;
    ":34"                          : LOCATION   = LC3_B13;
    ":36"                          : LOCATION   = LC1_C14;
    ":38"                          : LOCATION   = LC3_C4 ;
    ":40"                          : LOCATION   = LC7_A20;
    ":42"                          : LOCATION   = LC1_B13;
    ":48"                          : LOCATION   = LC2_C14;  -- aa3
    ":49"                          : LOCATION   = LC1_C4 ;  -- aa2
    ":50"                          : LOCATION   = LC4_A20;  -- aa1
    ":51"                          : LOCATION   = LC2_B13;  -- aa0

END;

INTERNAL_INFO "jsq_d"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC2_B4,->LC3_B4|";
    OD5P43  : LORAX = "1:FB5->LC6_C14,->LC6_C4,->LC1_A20,->LC7_B13,->LC5_C14,->LC2_C4,->LC3_A20,->LC5_B13,->LC4_C14,->LC5_C4,->LC2_A20,->LC3_B13,->LC1_C14,->LC3_C4,->LC7_A20,->LC1_B13,->LC2_C14,->LC1_C4,->LC4_A20,->LC2_B13|";
    LC2_B4  : LORAX = "1:MSW1R1C3,G35R1->OH9R1P22|2:PA3R1C12->LC2_B13||";
    LC3_B4  : LORAX = "1:MSW3R1C2,G23R1->OH11R1P23|";
    LC6_B4  : LORAX = "1:MSW6R1C2,V18C2->OV1C2P8,2:G87R0,PA11R0C19->LC4_A20||";
    LC1_B4  : LORAX = "1:MSW0R1C3,V2C3->OV0C3P6,2:HHL19R2,PA17R2C11->LC1_C12,->LC6_C12||";
    LC1_C12 : LORAX = "1:MSW0R2C11,HHL20R2->OH8R2P27|2:PA16R2C3->LC1_C4||";
    LC6_C12 : LORAX = "1:MSW6R2C10,HHL31R2->OH14R2P30|";
    LC3_C12 : LORAX = "1:MSW2R2C11,G18R2->OH2R2P61|2:PA16R2C13->LC2_C14||";
    LC2_C12 : LORAX = "1:MSW2R2C10,V8C10->OV3C10P39|";
    OD1P2   : LORAX = "1:FB1->LC2_B4,->LC3_B4,->LC6_B4,->LC1_B4,->LC1_C12,->LC6_C12,->LC3_C12,->LC2_C12|";
    LC6_C14 : LORAX = "1:MSW6R2C12,HHR29R2->OH6R2P58|";
    LC6_C4  : LORAX = "1:MSW5R2C3,V16C3,HHL33R1->OH13R1P24|";
    LC1_A20 : LORAX = "1:MSW0R0C19,HHR23R0->OH0R0P73|";
    LC7_B13 : LORAX = "1:MSW6R1C13,G53R1->OH6R1P64|";
    LC5_C14 : LORAX = "1:MSW5R2C12,V16C12->OV1C12P83|";
    LC2_C4  : LORAX = "1:MSW2R2C2,HHL1R2->OH10R2P28|";
    LC3_A20 : LORAX = "1:MSW3R0C18,HHR9R0->OH3R0P71|";
    LC5_B13 : LORAX = "1:MSW4R1C12,HHR41R1->OH4R1P65|";
    LC4_C14 : LORAX = "1:MSW3R2C13,HHR13R2->OH3R2P60|";
    LC5_C4  : LORAX = "1:MSW4R2C3,HHL38R2->OH12R2P29|";
    LC2_A20 : LORAX = "1:MSW2R0C18,G12R0->OH2R0P72|";
    LC3_B13 : LORAX = "1:MSW2R1C12,HHR3R1->OH2R1P66|";
    LC1_C14 : LORAX = "1:MSW0R2C13,V1C13->OV2C13P47|";
    LC3_C4  : LORAX = "1:MSW3R2C2,V11C2->OV0C2P7|";
    LC7_A20 : LORAX = "1:MSW7R0C18,HHR46R0->OH7R0P69|";
    LC1_B13 : LORAX = "1:MSW0R1C12,HHR22R1->OH0R1P67|";
	LC2_B4  : LORAX2 = "X, X, X, LC3_B4";
	LC3_B4  : LORAX2 = "X, X, X, LC3_B4";
	LC6_B4  : LORAX2 = "X, X, X, LC1_B4";
	LC1_B4  : LORAX2 = "X, X, X, LC1_B4";
	LC1_C12 : LORAX2 = "X, X, X, LC6_C12";
	LC6_C12 : LORAX2 = "X, X, X, LC6_C12";
	LC3_C12 : LORAX2 = "X, X, X, LC2_C12";
	LC2_C12 : LORAX2 = "X, X, X, LC2_C12";
	LC6_C14 : LORAX2 = "X, X, X, LC2_C14";
	LC6_C4  : LORAX2 = "X, X, X, LC1_C4";
	LC1_A20 : LORAX2 = "X, X, X, LC4_A20";
	LC7_B13 : LORAX2 = "X, X, X, LC2_B13";
	LC5_C14 : LORAX2 = "X, X, X, LC2_C14";
	LC2_C4  : LORAX2 = "X, X, X, LC1_C4";
	LC3_A20 : LORAX2 = "X, X, X, LC4_A20";
	LC5_B13 : LORAX2 = "X, X, X, LC2_B13";
	LC4_C14 : LORAX2 = "X, X, X, LC2_C14";
	LC5_C4  : LORAX2 = "X, X, X, LC1_C4";
	LC2_A20 : LORAX2 = "X, X, X, LC4_A20";
	LC3_B13 : LORAX2 = "X, X, X, LC2_B13";
	LC1_C14 : LORAX2 = "X, X, X, LC2_C14";
	LC3_C4  : LORAX2 = "X, X, X, LC1_C4";
	LC7_A20 : LORAX2 = "X, X, X, LC4_A20";
	LC1_B13 : LORAX2 = "X, X, X, LC2_B13";
	LC2_C14 : LORAX2 = "X, X, X, LC3_C12";
	LC1_C4  : LORAX2 = "X, X, X, LC1_C12";
	LC4_A20 : LORAX2 = "X, X, X, LC6_B4";
	LC2_B13 : LORAX2 = "X, X, X, LC2_B4";
END;