decoder_dynamic.pin
来自「利用一块芯片完成除时钟源、按键、扬声器和显示器(数码管)之外的所有数字电路功能。」· PIN 代码 · 共 100 行
PIN
100 行
-- Copyright (C) 1988-1999 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
N.C. = No Connect, This pin has no internal connection to the device.
VCCINT = Dedicated power pin, which MUST be connected to VCC (5.0 volts).
VCCIO = Dedicated power pin, which MUST be connected to VCC (5.0 volts).
GND = Dedicated ground pin or unused dedicated input, which MUST be connected to GND.
RESERVED = Unused I/O pin, which MUST be left unconnected.
----------------------------------------------------------------------------
CHIP "decoder_dynamic" ASSIGNED TO AN EPM7064LC68-7
GND : 1
GND : 2
VCCINT : 3
s10 : 4
s11 : 5
GND : 6
s12 : 7
s13 : 8
x00 : 9
x01 : 10
VCCIO : 11
x02 : 12
x03 : 13
x10 : 14
x11 : 15
GND : 16
x12 : 17
x13 : 18
h11 : 19
h02 : 20
VCCIO : 21
h03 : 22
h00 : 23
m13 : 24
h10 : 25
GND : 26
m02 : 27
s00 : 28
s01 : 29
s02 : 30
VCCIO : 31
s03 : 32
m12 : 33
GND : 34
VCCINT : 35
h12 : 36
h01 : 37
GND : 38
RESERVED : 39
h13 : 40
m00 : 41
m01 : 42
VCCIO : 43
RESERVED : 44
RESERVED : 45
m10 : 46
m03 : 47
GND : 48
RESERVED : 49
m11 : 50
sel4 : 51
sel7 : 52
VCCIO : 53
sel5 : 54
q0 : 55
q1 : 56
q2 : 57
GND : 58
sel6 : 59
q3 : 60
sel0 : 61
sel1 : 62
VCCIO : 63
sel2 : 64
sel3 : 65
GND : 66
clk : 67
GND : 68
⌨️ 快捷键说明
复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?