📄 yunsuan33.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.1 06/12/2001
-- Compiled: 10/14/2006 16:47:11
-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "yunsuan33"
BEGIN
DEVICE = "EPF10K10LC84-3";
"ALU-BUS" : INPUT_PIN = 42 ;
"CN" : INPUT_PIN = 9 ;
"DR0" : INPUT_PIN = 70 ;
"DR1" : INPUT_PIN = 16 ;
"DR2" : INPUT_PIN = 73 ;
"DR3" : INPUT_PIN = 69 ;
"LDDR1" : INPUT_PIN = 67 ;
"LDDR2" : INPUT_PIN = 25 ;
"LDRI" : INPUT_PIN = 17 ;
"M" : INPUT_PIN = 3 ;
"MUL" : INPUT_PIN = 2 ;
"N0" : INPUT_PIN = 54 ;
"N1" : INPUT_PIN = 61 ;
"N2" : INPUT_PIN = 78 ;
"N3" : INPUT_PIN = 53 ;
"N4" : INPUT_PIN = 79 ;
"N5" : INPUT_PIN = 80 ;
"N6" : INPUT_PIN = 27 ;
"N7" : INPUT_PIN = 60 ;
"RI-BUS" : INPUT_PIN = 19 ;
"SELRI" : INPUT_PIN = 71 ;
"SIGNAL" : INPUT_PIN = 21 ;
"SW-BUS" : INPUT_PIN = 1 ;
"S0" : INPUT_PIN = 38 ;
"S1" : INPUT_PIN = 43 ;
"S2" : INPUT_PIN = 44 ;
"S3" : INPUT_PIN = 84 ;
"T2" : INPUT_PIN = 50 ;
"BUS0" : OUTPUT_PIN = 62 ;
"BUS1" : OUTPUT_PIN = 66 ;
"BUS2" : OUTPUT_PIN = 58 ;
"BUS3" : OUTPUT_PIN = 59 ;
"BUS4" : OUTPUT_PIN = 29 ;
"BUS5" : OUTPUT_PIN = 28 ;
"BUS6" : OUTPUT_PIN = 30 ;
"BUS7" : OUTPUT_PIN = 64 ;
"|MULTI:7|one_bit_adder:U_0_0|:7" : LOCATION = LC4_C14;
"|MULTI:7|one_bit_adder:U_0_0|:12" : LOCATION = LC3_C3 ;
"|MULTI:7|one_bit_adder:U_0_1|:8" : LOCATION = LC1_C3 ;
"|MULTI:7|one_bit_adder:U_0_1|:12" : LOCATION = LC4_C3 ;
"|MULTI:7|one_bit_adder:U_0_1|:15" : LOCATION = LC6_C3 ;
"|MULTI:7|one_bit_adder:U_0_2|:8" : LOCATION = LC7_C3 ;
"|MULTI:7|one_bit_adder:U_0_2|:13" : LOCATION = LC4_C12;
"|MULTI:7|one_bit_adder:U_0_2|:15" : LOCATION = LC2_C12;
"|MULTI:7|one_bit_adder:U_0_3|:13" : LOCATION = LC7_C1 ;
"|MULTI:7|one_bit_adder:U_0_4|:8" : LOCATION = LC2_C1 ;
"|MULTI:7|one_bit_adder:U_0_4|:13" : LOCATION = LC4_C1 ;
"|MULTI:7|one_bit_adder:U_0_4|:14" : LOCATION = LC6_C1 ;
"|MULTI:7|one_bit_adder:U_1_0|:12" : LOCATION = LC8_C3 ;
"|MULTI:7|one_bit_adder:U_1_1|:8" : LOCATION = LC2_C3 ;
"|MULTI:7|one_bit_adder:U_1_1|:15" : LOCATION = LC5_C3 ;
"|MULTI:7|one_bit_adder:U_1_2|:8" : LOCATION = LC8_C1 ;
"|MULTI:7|one_bit_adder:U_1_2|:15" : LOCATION = LC1_C1 ;
"|MULTI:7|one_bit_adder:U_1_3|:8" : LOCATION = LC8_C10;
"|MULTI:7|one_bit_adder:U_1_3|:15" : LOCATION = LC4_C10;
"|MULTI:7|one_bit_adder:U_2_0|:12" : LOCATION = LC5_C2 ;
"|MULTI:7|one_bit_adder:U_2_1|:8" : LOCATION = LC7_C2 ;
"|MULTI:7|one_bit_adder:U_2_1|:15" : LOCATION = LC1_C2 ;
"|MULTI:7|one_bit_adder:U_2_2|:8" : LOCATION = LC6_C2 ;
"|MULTI:7|one_bit_adder:U_2_2|:15" : LOCATION = LC5_C10;
"|MULTI:7|one_bit_adder:U_3_0|:12" : LOCATION = LC8_C2 ;
"|MULTI:7|one_bit_adder:U_3_1|:8" : LOCATION = LC2_C2 ;
"|MULTI:7|one_bit_adder:U_3_1|:15" : LOCATION = LC3_C2 ;
"|MULTI:7|one_bit_adder:U_4_1|~8~1" : LOCATION = LC3_C12;
"|MULTI:7|one_bit_adder:U_4_1|~8~2" : LOCATION = LC1_C10;
"|MULTI:7|one_bit_adder:U_4_1|~8~3" : LOCATION = LC3_C10;
"|MULTI:7|one_bit_adder:U_4_1|~8~4" : LOCATION = LC6_C10;
"|MULTI:7|one_bit_adder:U_4_1|~8~5" : LOCATION = LC1_C11;
"|MULTI:7|:1401" : LOCATION = LC8_C12;
"|MULTI:7|:1716" : LOCATION = LC7_C9 ;
"|MULTI:7|:1830" : LOCATION = LC4_C16;
"|risel:1|2sel1:17|:101" : LOCATION = LC2_A15; -- |risel:1|2sel1:17|Y1
"|risel:1|2sel1:17|:102" : LOCATION = LC1_A15; -- |risel:1|2sel1:17|Y2
"|risel:1|:8" : LOCATION = LC4_A14; -- |risel:1|R1LD
"|risel:1|:9" : LOCATION = LC3_A14; -- |risel:1|R2LD
"|risel:1|:10" : LOCATION = LC2_A14; -- |risel:1|R3LD
"|risel:1|:11" : LOCATION = LC1_A14; -- |risel:1|R4LD
"|risel:1|:19" : LOCATION = LC7_A14;
"|risel:1|:20" : LOCATION = LC6_A14;
"|risel:1|:21" : LOCATION = LC5_A14;
"|risel:1|:22" : LOCATION = LC8_A14;
":18" : LOCATION = LC4_B10;
":19" : LOCATION = LC1_B8 ;
"|74181:20|:43" : LOCATION = LC2_C5 ;
"|74181:20|:44" : LOCATION = LC1_C4 ;
"|74181:20|:45" : LOCATION = LC3_C6 ;
"|74181:20|:46" : LOCATION = LC5_C5 ;
"|74181:20|:47" : LOCATION = LC3_C4 ;
"|74181:20|:48" : LOCATION = LC2_C6 ;
"|74181:20|~51~1" : LOCATION = LC1_B12;
"|74181:20|~52~1" : LOCATION = LC3_B12;
"|74181:20|:64" : LOCATION = LC6_C5 ;
"|74181:20|~73~1" : LOCATION = LC7_C5 ;
"|74181:20|:74" : LOCATION = LC1_C6 ;
"|74181:20|~74~1" : LOCATION = LC6_C4 ;
"|74181:20|:77" : LOCATION = LC2_B12;
"|74181:20|:79" : LOCATION = LC5_C4 ;
"|74181:20|:82" : LOCATION = LC5_C6 ;
"|74181:21|:43" : LOCATION = LC6_C12;
"|74181:21|:44" : LOCATION = LC5_C12;
"|74181:21|:45" : LOCATION = LC7_C12;
"|74181:21|:46" : LOCATION = LC3_C9 ;
"|74181:21|:47" : LOCATION = LC4_C7 ;
"|74181:21|:48" : LOCATION = LC6_C9 ;
"|74181:21|:51" : LOCATION = LC3_C5 ;
"|74181:21|:52" : LOCATION = LC4_C5 ;
"|74181:21|:75" : LOCATION = LC8_C7 ;
"|74181:21|:77" : LOCATION = LC8_C5 ;
"|74181:21|~78~1" : LOCATION = LC6_C7 ; -- |74181:21|CN4~1
"|74181:21|~78~2" : LOCATION = LC7_C7 ; -- |74181:21|CN4~2
"|74181:21|~78~3" : LOCATION = LC1_C7 ; -- |74181:21|CN4~3
"|74181:21|:80" : LOCATION = LC3_C7 ;
"|74181:21|:81" : LOCATION = LC2_C7 ;
"|74244:28|~1~1~1" : LOCATION = LC3_C18;
"|74244:28|~6~1" : LOCATION = LC5_C14;
"|74244:28|~11~1~1" : LOCATION = LC6_C16;
"|74244:28|~26~1" : LOCATION = LC2_B14;
"|74244:28|~27~1~1" : LOCATION = LC2_C11;
"|74244:30|~1~1~1" : LOCATION = LC1_C18;
"|74244:30|~1~1~1~2" : LOCATION = LC4_C23;
"|74244:30|~1~1~1~3" : LOCATION = LC2_C18;
"|74244:30|~1~1~1~4" : LOCATION = LC4_C18;
"|74244:30|~6~1~1" : LOCATION = LC2_C14;
"|74244:30|~6~1~1~2" : LOCATION = LC1_C14;
"|74244:30|~6~1~1~3" : LOCATION = LC4_C17;
"|74244:30|~6~1~1~4" : LOCATION = LC3_C14;
"|74244:30|~10~1~1" : LOCATION = LC6_C22;
"|74244:30|~10~1~1~2" : LOCATION = LC1_C21;
"|74244:30|~10~1~1~3" : LOCATION = LC8_C17;
"|74244:30|~10~1~1~4" : LOCATION = LC2_C22;
"|74244:30|~11~1~1" : LOCATION = LC5_C16;
"|74244:30|~11~1~1~2" : LOCATION = LC1_C16;
"|74244:30|~11~1~1~3" : LOCATION = LC2_C16;
"|74244:30|~11~1~1~4" : LOCATION = LC3_C16;
"|74244:30|~26~1~1" : LOCATION = LC7_B14;
"|74244:30|~26~1~1~2" : LOCATION = LC1_B14;
"|74244:30|~26~1~1~3" : LOCATION = LC2_C17;
"|74244:30|~26~1~1~4" : LOCATION = LC1_B18;
"|74244:30|~27~1~1" : LOCATION = LC7_C21;
"|74244:30|~27~1~1~2" : LOCATION = LC2_C21;
"|74244:30|~27~1~1~3" : LOCATION = LC3_C21;
"|74244:30|~27~1~1~4" : LOCATION = LC4_C21;
"|74244:30|~31~1~1" : LOCATION = LC2_C4 ;
"|74244:30|~31~1~1~2" : LOCATION = LC2_C20;
"|74244:30|~31~1~1~3" : LOCATION = LC4_C19;
"|74244:30|~31~1~1~4" : LOCATION = LC4_C4 ;
"|74244:30|~36~1~1" : LOCATION = LC5_C15;
"|74244:30|~36~1~1~2" : LOCATION = LC8_C20;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -