mem_interface_top.vhd

ISE MIG1.6 生成的DDR SDRAM控制器代码（含TESHBENCH）

-------------------------------------------------------------------------------
-- Copyright (c) 2005 Xilinx, Inc.
-- This design is confidential and proprietary of Xilinx, All Rights Reserved.
-------------------------------------------------------------------------------
--   ____  ____
--  /   /\/   /
-- /___/  \  / Vendor: Xilinx
-- \   \   \/ Version: 1.6
--  \   \ Application : MIG
--  /   / Filename: mem_interface_top.vhd
-- /___/   /\ Date Last Modified:  Wed Jun 1 2005
-- \   \  /  \Date Created: Mon May 2 2005
--  \___\/\___\
-- Device: Virtex-4
-- Design Name: DDR1_SDRAM
-- Description: It is the top most module which interfaces with the system and the 
--		memory.
-------------------------------------------------------------------------------

library ieee;
use ieee.std_logic_1164.all;
library UNISIM;
use UNISIM.vcomponents.all;
use work.mem_interface_top_parameters_0.all;

entity mem_interface_top is
	port(	 cntrl0_DDR_DQ : inout  std_logic_vector(15  downto 0);
cntrl0_DDR_A : out  std_logic_vector(12  downto 0);
cntrl0_DDR_BA : out  std_logic_vector(1  downto 0);
cntrl0_DDR_CKE : out std_logic;
cntrl0_DDR_CS_N : out std_logic;
cntrl0_DDR_RAS_N : out std_logic;
cntrl0_DDR_CAS_N : out std_logic;
cntrl0_DDR_WE_N : out std_logic;
cntrl0_DDR_DM : out  std_logic_vector(1  downto 0);
SYS_CLK_P : in std_logic;
SYS_CLK_N : in std_logic;
CLK200_P : in std_logic;
CLK200_N : in std_logic;
SYS_RESET_IN : in std_logic;
cntrl0_CLK_TB : out std_logic;
cntrl0_RESET_TB : out std_logic;
cntrl0_WDF_ALMOST_FULL : out std_logic;
cntrl0_AF_ALMOST_FULL : out std_logic;
cntrl0_READ_DATA_VALID : out std_logic;
cntrl0_APP_WDF_WREN : in std_logic;
cntrl0_APP_AF_WREN : in std_logic;
cntrl0_BURST_LENGTH : out  std_logic_vector(2  downto 0);
cntrl0_APP_AF_ADDR : in  std_logic_vector(35  downto 0);
cntrl0_APP_WDF_DATA : in  std_logic_vector(31  downto 0);
cntrl0_READ_DATA_FIFO_OUT : out  std_logic_vector(31  downto 0);
cntrl0_APP_MASK_DATA : in  std_logic_vector(3  downto 0);
cntrl0_DDR_DQS : inout  std_logic_vector(1  downto 0);
cntrl0_DDR_CK : out  std_logic_vector(0  downto 0);
cntrl0_DDR_CK_N : out  std_logic_vector(0  downto 0) 

		 );         		
end mem_interface_top;

architecture arch of mem_interface_top is

	      COMPONENT mem_interface_top_top_0  port (DDR_DQ : inout  std_logic_vector(15  downto 0);
DDR_A : out  std_logic_vector(12  downto 0);
DDR_BA : out  std_logic_vector(1  downto 0);
DDR_CKE : out std_logic;
DDR_CS_N : out std_logic;
DDR_RAS_N : out std_logic;
DDR_CAS_N : out std_logic;
DDR_WE_N : out std_logic;
DDR_DM : out  std_logic_vector(1  downto 0);
CLK_TB : out std_logic;
RESET_TB : out std_logic;
WDF_ALMOST_FULL : out std_logic;
AF_ALMOST_FULL : out std_logic;
READ_DATA_VALID : out std_logic;
APP_WDF_WREN : in std_logic;
APP_AF_WREN : in std_logic;
BURST_LENGTH : out  std_logic_vector(2  downto 0);
APP_AF_ADDR : in  std_logic_vector(35  downto 0);
APP_WDF_DATA : in  std_logic_vector(31  downto 0);
READ_DATA_FIFO_OUT : out  std_logic_vector(31  downto 0);
APP_MASK_DATA : in  std_logic_vector(3  downto 0);
DDR_DQS : inout  std_logic_vector(1  downto 0);
DDR_CK : out  std_logic_vector(0  downto 0);
DDR_CK_N : out  std_logic_vector(0  downto 0);

	 clk_0                 : in std_logic;
     clk_90                : in std_logic;
     clk_50                : in std_logic;
	 ref_clk			   : in std_logic;
     sys_rst               : in std_logic;
     sys_rst90             : in std_logic;
     sys_rst_ref_clk_1	   : in std_logic; 
     idelay_ctrl_rdy       : in std_logic
);
END COMPONENT;


component mem_interface_top_infrastructure
	port(	     
	     
	      CLK               : out std_logic;
	      CLK90            	: out std_logic;
	      CLK200           	: out std_logic;
	      CLK50             : out std_logic;
	      REFRESH_CLK      	: out std_logic; 
	      sys_rst          	: out std_logic;
	      sys_rst90         : out std_logic;
	      sys_rst_ref_clk_1 : out std_logic;
	       SYS_CLK_P : in std_logic;
SYS_CLK_N : in std_logic;
CLK200_P : in std_logic;
CLK200_N : in std_logic;
SYS_RESET_IN : in std_logic
	    );
end component;

component mem_interface_top_idelay_ctrl
	port( CLK200	: in std_logic;    
	      RESET	: in std_logic;     
	      RDY_STATUS : out std_logic
	    );
end component;



signal clk_0      : std_logic;                              
signal clk_90     : std_logic;                            
signal clk_200    : std_logic;        
signal clk_50     : std_logic;                   
signal ref_clk    : std_logic;                      
signal sys_rst    : std_logic;
signal sys_rst90  : std_logic;
signal sys_rst_ref_clk_1 : std_logic;
signal idelay_ctrl_rdy : std_logic; 
begin


	  top_00 :    mem_interface_top_top_0 port map (DDR_DQ	=> cntrl0_DDR_DQ,
DDR_A	=> cntrl0_DDR_A,
DDR_BA	=> cntrl0_DDR_BA,
DDR_CKE => cntrl0_DDR_CKE,
DDR_CS_N => cntrl0_DDR_CS_N,
DDR_RAS_N => cntrl0_DDR_RAS_N,
DDR_CAS_N => cntrl0_DDR_CAS_N,
DDR_WE_N => cntrl0_DDR_WE_N,
DDR_DM	=> cntrl0_DDR_DM,
CLK_TB => cntrl0_CLK_TB,
RESET_TB => cntrl0_RESET_TB,
WDF_ALMOST_FULL => cntrl0_WDF_ALMOST_FULL,
AF_ALMOST_FULL => cntrl0_AF_ALMOST_FULL,
READ_DATA_VALID => cntrl0_READ_DATA_VALID,
APP_WDF_WREN => cntrl0_APP_WDF_WREN,
APP_AF_WREN => cntrl0_APP_AF_WREN,
BURST_LENGTH	=> cntrl0_BURST_LENGTH,
APP_AF_ADDR	=> cntrl0_APP_AF_ADDR,
APP_WDF_DATA	=> cntrl0_APP_WDF_DATA,
READ_DATA_FIFO_OUT	=> cntrl0_READ_DATA_FIFO_OUT,
APP_MASK_DATA	=> cntrl0_APP_MASK_DATA,
DDR_DQS	=> cntrl0_DDR_DQS,
DDR_CK	=> cntrl0_DDR_CK,
DDR_CK_N	=> cntrl0_DDR_CK_N,
--infrastructure signals
clk_0           => clk_0,                              
clk_90          => clk_90,                            
idelay_ctrl_rdy => idelay_ctrl_rdy,
ref_clk			=> ref_clk,
clk_50          => clk_50,                   
sys_rst         => sys_rst,
sys_rst90       => sys_rst90,
sys_rst_ref_clk_1 =>sys_rst_ref_clk_1
);


infrastructure0: mem_interface_top_infrastructure	port map
	    ( 
		   CLK		=> clk_0,
                   CLK90        => clk_90,
                   CLK200       => clk_200,
                   CLK50        => clk_50,
                   REFRESH_CLK  => ref_clk,
		   sys_rst      => sys_rst,
		   sys_rst90    => sys_rst90,        
		   sys_rst_ref_clk_1 => sys_rst_ref_clk_1,
	      SYS_CLK_P => SYS_CLK_P,
SYS_CLK_N => SYS_CLK_N,
CLK200_P => CLK200_P,
CLK200_N => CLK200_N,
SYS_RESET_IN => SYS_RESET_IN
	    );	

idelay_ctrl0: mem_interface_top_idelay_ctrl port map
	    ( CLK200		=> clk_200,
	      RESET	  	=> sys_rst,
	      RDY_STATUS	=> idelay_ctrl_rdy
	    );

end arch;