📄 dcfq.pin
字号:
-- Copyright (C) 1991-2004 Altera Corporation
-- Any megafunction design, and related netlist (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only
-- to program PLD devices (but not masked PLD devices) from Altera. Any
-- other use of such megafunction design, netlist, support information,
-- device programming or simulation file, or any other related documentation
-- or information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to the
-- intellectual property, including patents, copyrights, trademarks, trade
-- secrets, or maskworks, embodied in any such megafunction design, netlist,
-- support information, device programming or simulation file, or any other
-- related documentation or information provided by Altera or a megafunction
-- partner, remains with Altera, the megafunction partner, or their respective
-- licensors. No other licenses, including any licenses needed under any third
-- party's intellectual property, are provided herein.
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCCINT : Dedicated power pin, which MUST be connected to VCC (1.5V).
-- VCCIO : Dedicated power pin, which MUST be connected to VCC
-- of its bank.
-- Bank 1: 3.3V
-- Bank 2: 3.3V
-- Bank 3: 3.3V
-- Bank 4: 3.3V
-- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND.
-- It can also be used to report unused dedicated pins. The connection
-- on the board for unused dedicated pins depends on whether this will
-- be used in a future design. One example is device migration. When
-- using device migration, refer to the device pin-tables. If it is a
-- GND pin in the pin table or if it will not be used in a future design
-- for another purpose the it MUST be connected to GND. If it is an unused
-- dedicated pin, then it can be connected to a valid signal on the board
-- (low, high, or toggling) if that signal is required for a different
-- revision of the design.
-- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins.
-- This pin should be connected to GND. It may also be connected to a
-- valid signal on the board (low, high, or toggling) if that signal
-- is required for a different revision of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
---------------------------------------------------------------------------------
Quartus II Version 4.0 Build 190 1/28/2004 SJ Full Version
CHIP "DCFQ" ASSIGNED TO AN: EP1C3T100C6
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
GND* : 1 : : : : 1 :
GND* : 2 : : : : 1 :
GND* : 3 : : : : 1 :
GND* : 4 : : : : 1 :
GND* : 5 : : : : 1 :
~nCSO~ / GND* : 6 : output : LVTTL : : 1 : N
DATA0 : 7 : input : : : 1 :
nCONFIG : 8 : : : : 1 :
VCCA_PLL1 : 9 : power : : 1.5V : 1 :
GND+ : 10 : : : : 1 :
GNDA_PLL1 : 11 : gnd : : : 1 :
nCEO : 12 : : : : 1 :
nCE : 13 : : : : 1 :
MSEL0 : 14 : : : : 1 :
MSEL1 : 15 : : : : 1 :
DCLK : 16 : bidir : : : 1 :
~ASDO~ / GND* : 17 : output : LVTTL : : 1 : N
VCCIO1 : 18 : power : : 3.3V : 1 :
GND : 19 : gnd : : : 1 :
GND* : 20 : : : : 1 :
GND* : 21 : : : : 1 :
Q : 22 : output : LVTTL : : 1 : N
GND* : 23 : : : : 1 :
CLK : 24 : input : LVTTL : : 1 : N
D : 25 : input : LVTTL : : 1 : N
GND* : 26 : : : : 4 :
GND* : 27 : : : : 4 :
GND* : 28 : : : : 4 :
GND* : 29 : : : : 4 :
GND : 30 : gnd : : : 1 :
VCCIO4 : 31 : power : : 3.3V : 4 :
GND : 32 : gnd : : : 1 :
VCCINT : 33 : power : : 1.5V : :
GND* : 34 : : : : 4 :
GND* : 35 : : : : 4 :
GND* : 36 : : : : 4 :
GND* : 37 : : : : 4 :
GND* : 38 : : : : 4 :
GND* : 39 : : : : 4 :
GND* : 40 : : : : 4 :
GND* : 41 : : : : 4 :
GND* : 42 : : : : 4 :
GND : 43 : gnd : : : 1 :
VCCINT : 44 : power : : 1.5V : :
GND : 45 : gnd : : : 1 :
VCCIO4 : 46 : power : : 3.3V : 4 :
GND* : 47 : : : : 4 :
GND* : 48 : : : : 4 :
GND* : 49 : : : : 4 :
GND* : 50 : : : : 4 :
GND* : 51 : : : : 3 :
GND* : 52 : : : : 3 :
GND* : 53 : : : : 3 :
GND* : 54 : : : : 3 :
GND* : 55 : : : : 3 :
GND* : 56 : : : : 3 :
GND* : 57 : : : : 3 :
GND : 58 : gnd : : : 1 :
VCCIO3 : 59 : power : : 3.3V : 3 :
CONF_DONE : 60 : : : : 3 :
nSTATUS : 61 : : : : 3 :
TCK : 62 : input : : : 3 :
TMS : 63 : input : : : 3 :
TDO : 64 : output : : : 3 :
GND* : 65 : : : : 3 :
GND+ : 66 : : : : 3 :
TDI : 67 : input : : : 3 :
GND* : 68 : : : : 3 :
GND* : 69 : : : : 3 :
GND* : 70 : : : : 3 :
GND* : 71 : : : : 3 :
GND* : 72 : : : : 3 :
GND* : 73 : : : : 3 :
GND* : 74 : : : : 3 :
GND* : 75 : : : : 3 :
GND* : 76 : : : : 2 :
GND* : 77 : : : : 2 :
GND* : 78 : : : : 2 :
GND* : 79 : : : : 2 :
VCCIO2 : 80 : power : : 3.3V : 2 :
GND : 81 : gnd : : : 1 :
VCCINT : 82 : power : : 1.5V : :
GND : 83 : gnd : : : 1 :
GND* : 84 : : : : 2 :
GND* : 85 : : : : 2 :
GND* : 86 : : : : 2 :
GND* : 87 : : : : 2 :
GND* : 88 : : : : 2 :
GND* : 89 : : : : 2 :
GND* : 90 : : : : 2 :
GND* : 91 : : : : 2 :
GND* : 92 : : : : 2 :
VCCINT : 93 : power : : 1.5V : :
GND : 94 : gnd : : : 1 :
VCCIO2 : 95 : power : : 3.3V : 2 :
GND : 96 : gnd : : : 1 :
GND* : 97 : : : : 2 :
GND* : 98 : : : : 2 :
GND* : 99 : : : : 2 :
GND* : 100 : : : : 2 :
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -