📄 time_mux.pin
字号:
-- Copyright (C) 1991-2004 Altera Corporation
-- Any megafunction design, and related netlist (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only
-- to program PLD devices (but not masked PLD devices) from Altera. Any
-- other use of such megafunction design, netlist, support information,
-- device programming or simulation file, or any other related documentation
-- or information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to the
-- intellectual property, including patents, copyrights, trademarks, trade
-- secrets, or maskworks, embodied in any such megafunction design, netlist,
-- support information, device programming or simulation file, or any other
-- related documentation or information provided by Altera or a megafunction
-- partner, remains with Altera, the megafunction partner, or their respective
-- licensors. No other licenses, including any licenses needed under any third
-- party's intellectual property, are provided herein.
--
-- This is a Quartus II output file. It is for reporting purposes only, and is
-- not intended for use as a Quartus II input file. This file cannot be used
-- to make Quartus II pin assignments - for instructions on how to make pin
-- assignments, please see Quartus II help.
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCC : Dedicated power pin, which MUST be connected to VCC.
-- VCCIO : Dedicated power pin, which MUST be connected to VCC
-- of its bank.
-- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND.
-- It can also be used to report unused dedicated pins. The connection
-- on the board for unused dedicated pins depends on whether this will
-- be used in a future design. One example is device migration. When
-- using device migration, refer to the device pin-tables. If it is a
-- GND pin in the pin table or if it will not be used in a future design
-- for another purpose the it MUST be connected to GND. If it is an unused
-- dedicated pin, then it can be connected to a valid signal on the board
-- (low, high, or toggling) if that signal is required for a different
-- revision of the design.
-- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins.
-- This pin should be connected to GND. It may also be connected to a
-- valid signal on the board (low, high, or toggling) if that signal
-- is required for a different revision of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
-- RESERVED : Unused I/O pin, which MUST be left unconnected.
-- RESERVED_INPUT : Pin is tri-stated and should be connected to the board.
-- NON_MIGRATABLE: This pin cannot be migrated.
---------------------------------------------------------------------------------
Quartus II Version 4.2 Build 157 12/07/2004 SJ Full Version
CHIP "time_mux" ASSIGNED TO AN: EPM7128STC100-6
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
hour_1[2] : 1 : output : TTL : : : N
hour_1[3] : 2 : output : TTL : : : N
VCCIO : 3 : power : : 5.0V : :
TDI : 4 : input : TTL : : : N
minute_1[1] : 5 : output : TTL : : : N
minute_1[0] : 6 : output : TTL : : : N
minute_0[3] : 7 : output : TTL : : : N
minute_0[2] : 8 : output : TTL : : : N
minute_0[1] : 9 : output : TTL : : : N
minute_0[0] : 10 : output : TTL : : : N
GND : 11 : gnd : : : :
second_1[3] : 12 : output : TTL : : : N
second_1[2] : 13 : output : TTL : : : N
second_1[1] : 14 : output : TTL : : : N
TMS : 15 : input : TTL : : : N
second_set1[1] : 16 : input : TTL : : : N
second_set0[1] : 17 : input : TTL : : : N
VCCIO : 18 : power : : 5.0V : :
minute1[1] : 19 : input : TTL : : : N
hour0[1] : 20 : input : TTL : : : N
second_1[0] : 21 : output : TTL : : : N
second_0[3] : 22 : output : TTL : : : N
second_0[2] : 23 : output : TTL : : : N
second_0[1] : 24 : output : TTL : : : N
second_0[0] : 25 : output : TTL : : : N
GND : 26 : gnd : : : :
minute_set0[0] : 27 : input : TTL : : : N
second_set1[0] : 28 : input : TTL : : : N
second1[2] : 29 : input : TTL : : : N
minute0[1] : 30 : input : TTL : : : N
hour0[3] : 31 : input : TTL : : : N
hour1[1] : 32 : input : TTL : : : N
minute_set1[1] : 33 : input : TTL : : : N
VCCIO : 34 : power : : 5.0V : :
hour_set0[1] : 35 : input : TTL : : : N
second0[1] : 36 : input : TTL : : : N
RESERVED : 37 : : : : :
GND : 38 : gnd : : : :
VCCINT : 39 : power : : 5.0V : :
RESERVED : 40 : : : : :
second0[0] : 41 : input : TTL : : : N
hour_set1[0] : 42 : input : TTL : : : N
GND : 43 : gnd : : : :
minute_set1[3] : 44 : input : TTL : : : N
minute_set0[2] : 45 : input : TTL : : : N
hour0[2] : 46 : input : TTL : : : N
minute1[2] : 47 : input : TTL : : : N
minute0[0] : 48 : input : TTL : : : N
second_set1[3] : 49 : input : TTL : : : N
minute_set0[1] : 50 : input : TTL : : : N
VCCIO : 51 : power : : 5.0V : :
RESERVED : 52 : : : : :
second0[3] : 53 : input : TTL : : : N
hour_set0[2] : 54 : input : TTL : : : N
minute_set1[0] : 55 : input : TTL : : : N
hour1[2] : 56 : input : TTL : : : N
hour0[0] : 57 : input : TTL : : : N
minute0[3] : 58 : input : TTL : : : N
GND : 59 : gnd : : : :
second1[1] : 60 : input : TTL : : : N
second_set0[3] : 61 : input : TTL : : : N
TCK : 62 : input : TTL : : : N
RESERVED : 63 : : : : :
hour_set1[3] : 64 : input : TTL : : : N
hour_set1[1] : 65 : input : TTL : : : N
VCCIO : 66 : power : : 5.0V : :
hour_set0[0] : 67 : input : TTL : : : N
hour1[3] : 68 : input : TTL : : : N
hour1[0] : 69 : input : TTL : : : N
minute1[0] : 70 : input : TTL : : : N
second_set0[0] : 71 : input : TTL : : : N
second_set1[2] : 72 : input : TTL : : : N
TDO : 73 : output : TTL : : : N
GND : 74 : gnd : : : :
RESERVED : 75 : : : : :
second0[2] : 76 : input : TTL : : : N
hour_set0[3] : 77 : input : TTL : : : N
minute_set1[2] : 78 : input : TTL : : : N
minute_set0[3] : 79 : input : TTL : : : N
minute1[3] : 80 : input : TTL : : : N
minute0[2] : 81 : input : TTL : : : N
VCCIO : 82 : power : : 5.0V : :
second1[3] : 83 : input : TTL : : : N
second_set0[2] : 84 : input : TTL : : : N
TimeSet_EN : 85 : input : TTL : : : N
GND : 86 : gnd : : : :
GND+ : 87 : : : : :
GND+ : 88 : : : : :
second1[0] : 89 : input : TTL : : : N
hour_set1[2] : 90 : input : TTL : : : N
VCCINT : 91 : power : : 5.0V : :
minute_1[2] : 92 : output : TTL : : : N
minute_1[3] : 93 : output : TTL : : : N
hour_0[0] : 94 : output : TTL : : : N
GND : 95 : gnd : : : :
hour_0[1] : 96 : output : TTL : : : N
hour_0[2] : 97 : output : TTL : : : N
hour_0[3] : 98 : output : TTL : : : N
hour_1[0] : 99 : output : TTL : : : N
hour_1[1] : 100 : output : TTL : : : N
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -