📄 kk.rpt
字号:
Project Information e:\max+plusii learning\course and others\vhdl\kk.rpt
MAX+plus II Compiler Report File
Version 10.2 07/10/2002
Compiled: 12/10/2005 21:19:27
Copyright (C) 1988-2002 Altera Corporation
Any megafunction design, and related net list (encrypted or decrypted),
support information, device programming or simulation file, and any other
associated documentation or information provided by Altera or a partner
under Altera's Megafunction Partnership Program may be used only to
program PLD devices (but not masked PLD devices) from Altera. Any other
use of such megafunction design, net list, support information, device
programming or simulation file, or any other related documentation or
information is prohibited for any other purpose, including, but not
limited to modification, reverse engineering, de-compiling, or use with
any other silicon devices, unless such use is explicitly licensed under
a separate agreement with Altera or a megafunction partner. Title to
the intellectual property, including patents, copyrights, trademarks,
trade secrets, or maskworks, embodied in any such megafunction design,
net list, support information, device programming or simulation file, or
any other related documentation or information provided by Altera or a
megafunction partner, remains with Altera, the megafunction partner, or
their respective licensors. No other licenses, including any licenses
needed under any third party's intellectual property, are provided herein.
***** Project compilation was successful
** DEVICE SUMMARY **
Chip/ Input Output Bidir Memory Memory LCs
POF Device Pins Pins Pins Bits % Utilized LCs % Utilized
kk EPF10K20TC144-3 4 14 0 0 0 % 308 26 %
User Pins: 4 14 0
Project Information e:\max+plusii learning\course and others\vhdl\kk.rpt
** PROJECT COMPILATION MESSAGES **
Warning: Node 'numout0' has assignments but doesn't exist or is a primitive array -- edit the project's ACF to fix the problem
Warning: Node 'numout1' has assignments but doesn't exist or is a primitive array -- edit the project's ACF to fix the problem
Warning: Node 'numout2' has assignments but doesn't exist or is a primitive array -- edit the project's ACF to fix the problem
Warning: Node 'numout3' has assignments but doesn't exist or is a primitive array -- edit the project's ACF to fix the problem
Project Information e:\max+plusii learning\course and others\vhdl\kk.rpt
** PIN/LOCATION/CHIP ASSIGNMENTS **
Actual
User Assignments
Assignments (if different) Node Name
kk@55 cp
kk@88 key0
kk@87 key1
kk@86 key2
kk@37 --------- numout0
kk@38 --------- numout1
kk@39 --------- numout2
kk@41 --------- numout3
kk@51 segout0
kk@49 segout1
kk@48 segout2
kk@47 segout3
kk@46 segout4
kk@44 segout5
kk@43 segout6
kk@42 segout7
kk@8 selout0
kk@102 selout1
kk@100 selout2
kk@99 selout3
kk@97 selout4
kk@96 selout5
Project Information e:\max+plusii learning\course and others\vhdl\kk.rpt
** FILE HIERARCHY **
|timer_set:1|
|timer_set:1|lpm_add_sub:383|
|timer_set:1|lpm_add_sub:383|addcore:adder|
|timer_set:1|lpm_add_sub:383|altshift:result_ext_latency_ffs|
|timer_set:1|lpm_add_sub:383|altshift:carry_ext_latency_ffs|
|timer_set:1|lpm_add_sub:383|altshift:oflow_ext_latency_ffs|
|timer_set:1|lpm_add_sub:791|
|timer_set:1|lpm_add_sub:791|addcore:adder|
|timer_set:1|lpm_add_sub:791|altshift:result_ext_latency_ffs|
|timer_set:1|lpm_add_sub:791|altshift:carry_ext_latency_ffs|
|timer_set:1|lpm_add_sub:791|altshift:oflow_ext_latency_ffs|
|timer_set:1|counter60:u1|
|timer_set:1|counter60:u1|lpm_add_sub:83|
|timer_set:1|counter60:u1|lpm_add_sub:83|addcore:adder|
|timer_set:1|counter60:u1|lpm_add_sub:83|altshift:result_ext_latency_ffs|
|timer_set:1|counter60:u1|lpm_add_sub:83|altshift:carry_ext_latency_ffs|
|timer_set:1|counter60:u1|lpm_add_sub:83|altshift:oflow_ext_latency_ffs|
|timer_set:1|counter60:u2|
|timer_set:1|counter60:u2|lpm_add_sub:83|
|timer_set:1|counter60:u2|lpm_add_sub:83|addcore:adder|
|timer_set:1|counter60:u2|lpm_add_sub:83|altshift:result_ext_latency_ffs|
|timer_set:1|counter60:u2|lpm_add_sub:83|altshift:carry_ext_latency_ffs|
|timer_set:1|counter60:u2|lpm_add_sub:83|altshift:oflow_ext_latency_ffs|
|timer_set:1|counter24:u3|
|timer_set:1|counter24:u3|lpm_add_sub:78|
|timer_set:1|counter24:u3|lpm_add_sub:78|addcore:adder|
|timer_set:1|counter24:u3|lpm_add_sub:78|altshift:result_ext_latency_ffs|
|timer_set:1|counter24:u3|lpm_add_sub:78|altshift:carry_ext_latency_ffs|
|timer_set:1|counter24:u3|lpm_add_sub:78|altshift:oflow_ext_latency_ffs|
Device-Specific Information:e:\max+plusii learning\course and others\vhdl\kk.rpt
kk
***** Logic for device 'kk' compiled without errors.
Device: EPF10K20TC144-3
FLEX 10K Configuration Scheme: Passive Serial
Device Options:
User-Supplied Start-Up Clock = OFF
Auto-Restart Configuration on Frame Error = OFF
Release Clears Before Tri-States = OFF
Enable Chip_Wide Reset = OFF
Enable Chip-Wide Output Enable = OFF
Enable INIT_DONE Output = OFF
JTAG User Code = 7f
MultiVolt I/O = OFF
R R R R R R R R R R R R R R R R R R R R R R R R R R R
E E E E E E E E E E E E E E E E E E E E E E E E E E E
S S S S S S S S S S S S S S G G G G V S S S S S S S S S S S S S
E E E E E G E E E E V E E E E G E N N N N C E E E E E E E V E E E E E E
R R R R R N R R R R C R R R R N R D D D D C R R R R R R R C R R R R R R
V V V V V D V V V V C V V V V D V I I I I I V V V V V V V C V V V V V V
E E E E E I E E E E I E E E E I E N N N N N E E E E E E E I E E E E E E
D D D D D O D D D D O D D D D O D T T T T T D D D D D D D O D D D D D D
--------------------------------------------------------------------------_
/ 144 142 140 138 136 134 132 130 128 126 124 122 120 118 116 114 112 110 |_
/ 143 141 139 137 135 133 131 129 127 125 123 121 119 117 115 113 111 109 |
#TCK | 1 108 | ^DATA0
^CONF_DONE | 2 107 | ^DCLK
^nCEO | 3 106 | ^nCE
#TDO | 4 105 | #TDI
VCCIO | 5 104 | GNDIO
VCCINT | 6 103 | GNDINT
RESERVED | 7 102 | selout1
selout0 | 8 101 | RESERVED
RESERVED | 9 100 | selout2
RESERVED | 10 99 | selout3
RESERVED | 11 98 | RESERVED
RESERVED | 12 97 | selout4
RESERVED | 13 96 | selout5
RESERVED | 14 95 | RESERVED
GNDIO | 15 94 | VCCIO
GNDINT | 16 93 | VCCINT
RESERVED | 17 92 | RESERVED
RESERVED | 18 91 | RESERVED
RESERVED | 19 EPF10K20TC144-3 90 | RESERVED
RESERVED | 20 89 | RESERVED
RESERVED | 21 88 | key0
RESERVED | 22 87 | key1
RESERVED | 23 86 | key2
VCCIO | 24 85 | GNDIO
VCCINT | 25 84 | GNDINT
RESERVED | 26 83 | RESERVED
RESERVED | 27 82 | RESERVED
RESERVED | 28 81 | RESERVED
RESERVED | 29 80 | RESERVED
RESERVED | 30 79 | RESERVED
RESERVED | 31 78 | RESERVED
RESERVED | 32 77 | ^MSEL0
RESERVED | 33 76 | ^MSEL1
#TMS | 34 75 | VCCINT
^nSTATUS | 35 74 | ^nCONFIG
RESERVED | 36 73 | RESERVED
| 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 _|
\ 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 |
\---------------------------------------------------------------------------
R R R G R s s s V s s s s G s V V G c G G G R R V R R R R G R R R R V R
E E E N E e e e C e e e e N e C C N p N N N E E C E E E E N E E E E C E
S S S D S g g g C g g g g D g C C D D D D S S C S S S S D S S S S C S
E E E I E o o o I o o o o I o I I I I I I E E I E E E E I E E E E I E
R R R O R u u u O u u u u O u N N N N N N R R O R R R R O R R R R O R
V V V V t t t t t t t t T T T T T T V V V V V V V V V V V
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -