float_add_modue.bld

32位单精度浮点加法器

Release 14.2 ngdbuild P.28xd (nt64)
Copyright (c) 1995-2012 Xilinx, Inc.  All rights reserved.

Command Line: E:\xi14.2\14.2\ISE_DS\ISE\bin\nt64\unwrapped\ngdbuild.exe
-intstyle ise -dd _ngo -nt timestamp -uc float_add_modue.ucf -p
xc7vx485t-ffg1761-2 float_add_modue.ngc float_add_modue.ngd

Reading NGO file "E:/kechengsheji/ha1/float_add_modue.ngc" ...
Gathering constraint information from source properties...
Done.

Annotating constraints to design from ucf file "float_add_modue.ucf" ...
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(1): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(23): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(24): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(26): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(27): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(28): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(30): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(31): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(35): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(36): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(37): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(38): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(43): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(64): Unable to resolve
   constraint association type "initial". "initial" is not a valid constraint
   type for association in the "UCF" constraint format.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(70): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(72): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(76): Invalid
   parameter: '<' for constraint type 'B':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(77): Invalid
   parameter: '<' for constraint type 'Start_Sig':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(78): Invalid
   parameter: '<' for constraint type 'i':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(80): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(84): Invalid
   parameter: '<' for constraint type 'i':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(84): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(85): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(85): Invalid
   parameter: '<' for constraint type 'B':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(85): Invalid
   parameter: '<' for constraint type 'Start_Sig':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(87): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(88): Invalid
   parameter: '<' for constraint type 'i':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(89): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(89): Invalid
   parameter: '<' for constraint type 'B':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(89): Invalid
   parameter: '<' for constraint type 'Start_Sig':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(91): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(92): Invalid
   parameter: '<' for constraint type 'i':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(92): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(93): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(93): Invalid
   parameter: '<' for constraint type 'B':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(93): Invalid
   parameter: '<' for constraint type 'Start_Sig':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(95): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(96): Invalid
   parameter: '<' for constraint type 'i':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(97): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(97): Invalid
   parameter: '<' for constraint type 'B':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(97): Invalid
   parameter: '<' for constraint type 'Start_Sig':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(100): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(101): Invalid
   parameter: '<' for constraint type 'i':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(101): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(102): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(102): Invalid
   parameter: '<' for constraint type 'B':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(102): Invalid
   parameter: '<' for constraint type 'Start_Sig':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(104): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(105): Invalid
   parameter: '<' for constraint type 'i':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(105): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(106): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(106): Invalid
   parameter: '<' for constraint type 'B':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(106): Invalid
   parameter: '<' for constraint type 'Start_Sig':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(108): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(109): Invalid
   parameter: '<' for constraint type 'i':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(109): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(110): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(110): Invalid
   parameter: '<' for constraint type 'B':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(110): Invalid
   parameter: '<' for constraint type 'Start_Sig':
   This constraint type cannot accept the 'NAME' value as a parameter.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(112): Syntax error. 
   Ensure that the previous constraint specification was terminated with ';'.
ERROR:ConstraintSystem:300 - In file: float_add_modue.ucf(122): Unexpected end
   of file 'float_add_modue.ucf' during read.
   Ensure that the last constraint in the file ends with a ';'
Resolving constraint associations...
Checking Constraint Associations...
Done...

Checking expanded design ...

Partition Implementation Status
-------------------------------

  No Partitions were found in this design.

-------------------------------

NGDBUILD Design Results Summary:
  Number of errors:    61
  Number of warnings:   0

Total memory usage is 211300 kilobytes

Total REAL time to NGDBUILD completion:  13 sec
Total CPU time to NGDBUILD completion:   11 sec

One or more errors were found during NGDBUILD.  No NGD file will be written.

Writing NGDBUILD log file "float_add_modue.bld"...