ngdbuild.xmsgs

32位单精度浮点加法器

<?xml version="1.0" encoding="UTF-8"?>
<!-- IMPORTANT: This is an internal file that has been generated
     by the Xilinx ISE software.  Any direct editing or
     changes made to this file may result in unpredictable
     behavior or data corruption.  It is strongly advised that
     users do not edit the contents of this file. -->
<messages>
<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(1): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(23): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(24): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(26): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(27): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(28): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(30): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(31): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(35): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(36): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(37): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(38): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(43): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(64): Unable to resolve constraint association type &quot;initial&quot;. &quot;initial&quot; is not a valid constraint type for association in the &quot;UCF&quot; constraint format.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(70): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(72): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(76): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;B&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(77): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;Start_Sig&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(78): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;i&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(80): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(84): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;i&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(84): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(85): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(85): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;B&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(85): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;Start_Sig&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(87): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(88): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;i&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(89): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(89): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;B&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(89): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;Start_Sig&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(91): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(92): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;i&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(92): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(93): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(93): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;B&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(93): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;Start_Sig&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(95): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(96): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;i&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(97): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(97): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;B&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(97): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;Start_Sig&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(100): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(101): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;i&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(101): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(102): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(102): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;B&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(102): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;Start_Sig&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(104): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(105): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;i&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(105): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(106): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(106): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;B&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(106): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;Start_Sig&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(108): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(109): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;i&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(109): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(110): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(110): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;B&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(110): Invalid parameter: &apos;&lt;&apos; for constraint type &apos;Start_Sig&apos;:
This constraint type cannot accept the &apos;NAME&apos; value as a parameter.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(112): Syntax error.  Ensure that the previous constraint specification was terminated with &apos;;&apos;.
</msg>

<msg type="error" file="ConstraintSystem:300" num="0" >In file: float_add_modue.ucf(122): Unexpected end of file &apos;float_add_modue.ucf&apos; during read.
Ensure that the last constraint in the file ends with a &apos;;&apos;
</msg>

</messages>