float_add_modue_map.mrp

来自「32位单精度浮点加法器」· MRP 代码 · 共 992 行 · 第 1/5 页

   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB Result<13> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB Result<14> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB Result<11> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB Result<12> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB Result<27> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB Result<28> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB Result<25> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB Result<26> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB B<10> is either not constrained (LOC) to
   a specific location and/or has an undefined I/O Standard (IOSTANDARD). This
   condition may seriously affect the device and will be an error in bitstream
   creation. It should be corrected by properly specifying the pin location and
   I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB B<11> is either not constrained (LOC) to
   a specific location and/or has an undefined I/O Standard (IOSTANDARD). This
   condition may seriously affect the device and will be an error in bitstream
   creation. It should be corrected by properly specifying the pin location and
   I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB Result<29> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB B<12> is either not constrained (LOC) to
   a specific location and/or has an undefined I/O Standard (IOSTANDARD). This
   condition may seriously affect the device and will be an error in bitstream
   creation. It should be corrected by properly specifying the pin location and
   I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB B<13> is either not constrained (LOC) to
   a specific location and/or has an undefined I/O Standard (IOSTANDARD). This
   condition may seriously affect the device and will be an error in bitstream
   creation. It should be corrected by properly specifying the pin location and
   I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB B<14> is either not constrained (LOC) to
   a specific location and/or has an undefined I/O Standard (IOSTANDARD). This
   condition may seriously affect the device and will be an error in bitstream
   creation. It should be corrected by properly specifying the pin location and
   I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB Result<20> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB B<15> is either not constrained (LOC) to
   a specific location and/or has an undefined I/O Standard (IOSTANDARD). This
   condition may seriously affect the device and will be an error in bitstream
   creation. It should be corrected by properly specifying the pin location and
   I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB SQ_rB<5> is either not constrained (LOC)
   to a specific location and/or has an undefined I/O Standard (IOSTANDARD).
   This condition may seriously affect the device and will be an error in
   bitstream creation. It should be corrected by properly specifying the pin
   location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB B<16> is either not constrained (LOC) to
   a specific location and/or has an undefined I/O Standard (IOSTANDARD). This
   condition may seriously affect the device and will be an error in bitstream
   creation. It should be corrected by properly specifying the pin location and
   I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB SQ_rB<14> is either not constrained (LOC)
   to a specific location and/or has an undefined I/O Standard (IOSTANDARD).
   This condition may seriously affect the device and will be an error in
   bitstream creation. It should be corrected by properly specifying the pin
   location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB SQ_rB<6> is either not constrained (LOC)
   to a specific location and/or has an undefined I/O Standard (IOSTANDARD).
   This condition may seriously affect the device and will be an error in
   bitstream creation. It should be corrected by properly specifying the pin
   location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB B<17> is either not constrained (LOC) to
   a specific location and/or has an undefined I/O Standard (IOSTANDARD). This
   condition may seriously affect the device and will be an error in bitstream
   creation. It should be corrected by properly specifying the pin location and
   I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB SQ_rB<13> is either not constrained (LOC)
   to a specific location and/or has an undefined I/O Standard (IOSTANDARD).
   This condition may seriously affect the device and will be an error in
   bitstream creation. It should be corrected by properly specifying the pin
   location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB SQ_rB<7> is either not constrained (LOC)
   to a specific location and/or has an undefined I/O Standard (IOSTANDARD).
   This condition may seriously affect the device and will be an error in
   bitstream creation. It should be corrected by properly specifying the pin
   location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB Result<23> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB B<18> is either not constrained (LOC) to
   a specific location and/or has an undefined I/O Standard (IOSTANDARD). This
   condition may seriously affect the device and will be an error in bitstream
   creation. It should be corrected by properly specifying the pin location and
   I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB SQ_rB<12> is either not constrained (LOC)
   to a specific location and/or has an undefined I/O Standard (IOSTANDARD).
   This condition may seriously affect the device and will be an error in
   bitstream creation. It should be corrected by properly specifying the pin
   location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB SQ_rB<8> is either not constrained (LOC)
   to a specific location and/or has an undefined I/O Standard (IOSTANDARD).
   This condition may seriously affect the device and will be an error in
   bitstream creation. It should be corrected by properly specifying the pin
   location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB Result<24> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB B<19> is either not constrained (LOC) to
   a specific location and/or has an undefined I/O Standard (IOSTANDARD). This
   condition may seriously affect the device and will be an error in bitstream
   creation. It should be corrected by properly specifying the pin location and
   I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB SQ_rB<11> is either not constrained (LOC)
   to a specific location and/or has an undefined I/O Standard (IOSTANDARD).
   This condition may seriously affect the device and will be an error in
   bitstream creation. It should be corrected by properly specifying the pin
   location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB SQ_rB<9> is either not constrained (LOC)
   to a specific location and/or has an undefined I/O Standard (IOSTANDARD).
   This condition may seriously affect the device and will be an error in
   bitstream creation. It should be corrected by properly specifying the pin
   location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB Result<21> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB SQ_rB<10> is either not constrained (LOC)
   to a specific location and/or has an undefined I/O Standard (IOSTANDARD).
   This condition may seriously affect the device and will be an error in
   bitstream creation. It should be corrected by properly specifying the pin
   location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB Result<22> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB SQ_Temp<1> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB SQ_Temp<2> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB SQ_Temp<3> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB SQ_Temp<4> is either not constrained
   (LOC) to a specific location and/or has an undefined I/O Standard
   (IOSTANDARD). This condition may seriously affect the device and will be an
   error in bitstream creation. It should be corrected by properly specifying
   the pin location and I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB B<20> is either not constrained (LOC) to
   a specific location and/or has an undefined I/O Standard (IOSTANDARD). This
   condition may seriously affect the device and will be an error in bitstream
   creation. It should be corrected by properly specifying the pin location and
   I/O Standard.
WARNING:PhysDesignRules:2452 - The IOB SQ_rB<0> is either not constrained (LOC)
   to a specific location and/or has an undefined I/O Standard (IOSTANDARD).