_impact.log

数字计时器

iMPACT Version: 
iMPACT log file Started on Wed Jul 05 17:51:56 2006

// *** BATCH CMD : setPreference -pref AutoSignature:FALSE
// *** BATCH CMD : setPreference -pref KeepSVF:FALSE
// *** BATCH CMD : setPreference -pref ConcurrentMode:FALSE
// *** BATCH CMD : setPreference -pref UseHighz:FALSE
// *** BATCH CMD : setPreference -pref UserLevel:NOVICE
// *** BATCH CMD : setPreference -pref svfUseTime:FALSE
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
GUI --- Auto connect to cable...
// *** BATCH CMD : setCable -port auto
AutoDetecting cable. Please wait.
PROGRESS_START - Starting Operation.
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
 Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h.
 ECP base address = 0778h.
Cable connection established.
PROGRESS_END - End Operation.
Elapsed time =      1 sec.
Attempting to identify devices in the boundary-scan chain configuration...Command: Identify 
// *** BATCH CMD : Identify
PROGRESS_START - Starting Operation.
Identifying chain contents ....'1': : Manufacturer's ID =Xilinx xcf04s, Version : 0
INFO:iMPACT:1777 - 
   Reading D:/Xilinx/xcf/data/xcf04s.bsd...
INFO:iMPACT:501 - '1': Added Device xcf04s successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'2': : Manufacturer's ID =Xilinx xc2v1000, Version : 3
INFO:iMPACT:1777 - 
   Reading D:/Xilinx/virtex2/data/xc2v1000.bsd...
INFO:iMPACT:501 - '1': Added Device xc2v1000 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
PROGRESS_END - End Operation.
Elapsed time =      1 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "E:/FPGA/Exp4-Clock/seg.bit"
'1': Loading file 'E:/FPGA/Exp4-Clock/seg.bit' ...
done.
WARNING:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the   bitstream stored in memory,
   but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc2v1000 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
// *** BATCH CMD : assignFile -p 2 -file "E:/FPGA/Exp4-Clock/AA.mcs"
'2': Loading file 'E:/FPGA/Exp4-Clock/AA.mcs' ...
done.
// *** BATCH CMD : setAttribute -position 2 -attr packageName -value "(null)"
Command: Program -p 0 -defaultVersion 0 
// *** BATCH CMD : Program -p 1 -defaultVersion 0 
PROGRESS_START - Starting Operation.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming  device...
done.
'1': Reading status register contents...
CRC error                                         :         0
Decryptor security set                            :         0
DCM locked                                        :         1
DCI matched                                       :         1
legacy input error                                :         0
status of GTS_CFG_B                               :         1
status of GWE                                     :         1
status of GHIGH                                   :         1
value of MODE pin M0                              :         0
value of MODE pin M1                              :         0
value of MODE pin M2                              :         0
value of CFG_RDY (INIT_B)                         :         1
DONEIN input from DONE pin                        :         1
IDCODE not validated while trying to write FDRI   :         0
write FDRI issued before or after decrypt operation:         0
Decryptor keys not used in proper sequence        :         0
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 0111 0001 1000 0000 0000 0000 0000 
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time =     25 sec.
Command: Program -p 1 -e -v -defaultVersion 0 
// *** BATCH CMD : Program -p 2 -e -v -defaultVersion 0 
PROGRESS_START - Starting Operation.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
'2': Erasing device...
Erasure completed successfully.
'2': Programming device...
done.
'2': Putting device in ISP mode...done.
'2': Putting device in ISP mode...done.
'2': Verifying device...Failed at address, 0'2': Verification Terminated
Programming of user selected options failed.
PROGRESS_END - End Operation.
Elapsed time =     37 sec.
Command: Program -p 0 -v -defaultVersion 0 
// *** BATCH CMD : Program -p 1 -v -defaultVersion 0 
PROGRESS_START - Starting Operation.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
ERROR:Bitstream:2 - The input file "E:/FPGA/Exp4-Clock/seg.msk" does not exist.    Please check that the specified location is correct and that the bitstream   was succesfully created.
ERROR:iMPACT:123 - Mask file E:/FPGA/Exp4-Clock/seg.msk is invalid.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programming terminated, Done did not go high.
PROGRESS_END - End Operation.
Elapsed time =      2 sec.