__projnav.log

將正在順時針或逆時針旋轉的步進馬達目前角度顯示在ＬＣＭ上。

clk                                | BUFGP                  | 25    |
-----------------------------------+------------------------+-------+

Timing Summary:
---------------
Speed Grade: -5

   Minimum period: 30.535ns (Maximum Frequency: 32.749MHz)
   Minimum input arrival time before clock: 32.117ns
   Maximum output required time after clock: 9.749ns
   Maximum combinational path delay: No path found

=========================================================================

Completed process "Synthesize".



Project Navigator Auto-Make Log File
-------------------------------------

JHDPARSE - VHDL/Verilog Parser.
ISE 5.1i Copyright (c) 1995-2002 Xilinx, Inc.  All rights reserved.

Scanning    STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD.VHD
Scanning    STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD_PACK.VHD
Scanning    STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD.VHD
Writing STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD.jhd.

JHDPARSE complete -    0 errors,    0 warnings.



Project Navigator Auto-Make Log File
-------------------------------------




Started process "Synthesize".


=========================================================================
*                          HDL Compilation                              *
=========================================================================
WARNING:HDLParsers:3215 - Unit work/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD_PACK is now defined in a different file: was E:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD_PACK.VHD, now is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD_PACK.VHD
WARNING:HDLParsers:3215 - Unit work/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD is now defined in a different file: was E:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD.VHD, now is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD.VHD
WARNING:HDLParsers:3215 - Unit work/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BEHAVIORAL is now defined in a different file: was E:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD.VHD, now is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD.VHD
WARNING:HDLParsers:3215 - Unit work/BCD_ADD_SUB_4DIG is now defined in a different file: was E:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_SUB_4DIG.VHD, now is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_SUB_4DIG.VHD
WARNING:HDLParsers:3215 - Unit work/BCD_ADD_SUB_4DIG/BEHAVIORAL is now defined in a different file: was E:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_SUB_4DIG.VHD, now is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_SUB_4DIG.VHD
WARNING:HDLParsers:3215 - Unit work/BCD_ADD_SUB_1DIG is now defined in a different file: was E:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_SUB_1DIG.vhd, now is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_SUB_1DIG.vhd
WARNING:HDLParsers:3215 - Unit work/BCD_ADD_SUB_1DIG/BEHAVIORAL is now defined in a different file: was E:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_SUB_1DIG.vhd, now is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_SUB_1DIG.vhd
WARNING:HDLParsers:3215 - Unit work/COMPLEMENT is now defined in a different file: was E:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/COMPLEMENT.vhd, now is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/COMPLEMENT.vhd
WARNING:HDLParsers:3215 - Unit work/COMPLEMENT/BEHAVIORAL is now defined in a different file: was E:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/COMPLEMENT.vhd, now is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/COMPLEMENT.vhd
WARNING:HDLParsers:3215 - Unit work/BCD_ADD_1DIG is now defined in a different file: was E:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_1DIG.VHD, now is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_1DIG.VHD
WARNING:HDLParsers:3215 - Unit work/BCD_ADD_1DIG/BEHAVIORAL is now defined in a different file: was E:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_1DIG.VHD, now is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_1DIG.VHD
WARNING:HDLParsers:3215 - Unit work/BIN_ADD_4BIT is now defined in a different file: was E:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BIN_ADD_4BIT.VHD, now is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BIN_ADD_4BIT.VHD
WARNING:HDLParsers:3215 - Unit work/BIN_ADD_4BIT/BIN_ADD_4BIT_ARCH is now defined in a different file: was E:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BIN_ADD_4BIT.VHD, now is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BIN_ADD_4BIT.VHD
Compiling vhdl file C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD_PACK.VHD in Library work.
Compiling vhdl file C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BIN_ADD_4BIT.VHD in Library work.
Architecture bin_add_4bit_arch of Entity bin_add_4bit is up to date.
Compiling vhdl file C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/COMPLEMENT.vhd in Library work.
Architecture behavioral of Entity complement is up to date.
Compiling vhdl file C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_1DIG.VHD in Library work.
Architecture behavioral of Entity bcd_add_1dig is up to date.
Compiling vhdl file C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_SUB_1DIG.vhd in Library work.
Architecture behavioral of Entity bcd_add_sub_1dig is up to date.
Compiling vhdl file C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_SUB_4DIG.VHD in Library work.
Architecture behavioral of Entity bcd_add_sub_4dig is up to date.
Compiling vhdl file C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD.VHD in Library work.
Entity <step_motor_degree_forward_reverse_lcd> (Architecture <behavioral>) compiled.

=========================================================================
*                            HDL Analysis                               *
=========================================================================

Analyzing Entity <step_motor_degree_forward_reverse_lcd> (Architecture <behavioral>).
INFO:Xst:1304 - Contents of register <lcm_rw> in unit <step_motor_degree_forward_reverse_lcd> never changes during circuit operation. The register is replaced by logic.
Entity <step_motor_degree_forward_reverse_lcd> analyzed. Unit <step_motor_degree_forward_reverse_lcd> generated.

Analyzing Entity <bcd_add_sub_4dig> (Architecture <behavioral>).
Entity <bcd_add_sub_4dig> analyzed. Unit <bcd_add_sub_4dig> generated.

Analyzing Entity <bcd_add_sub_1dig> (Architecture <behavioral>).
Entity <bcd_add_sub_1dig> analyzed. Unit <bcd_add_sub_1dig> generated.

Analyzing Entity <complement> (Architecture <behavioral>).
Entity <complement> analyzed. Unit <complement> generated.

Analyzing Entity <bcd_add_1dig> (Architecture <behavioral>).
WARNING:Xst:753 - C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_1DIG.VHD line 31: Unconnected output port 'carry' of component 'bin_add_4bit'.
Entity <bcd_add_1dig> analyzed. Unit <bcd_add_1dig> generated.

Analyzing Entity <bin_add_4bit> (Architecture <bin_add_4bit_arch>).
Entity <bin_add_4bit> analyzed. Unit <bin_add_4bit> generated.


=========================================================================
*                           HDL Synthesis                               *
=========================================================================

Synthesizing Unit <bin_add_4bit>.
    Related source file is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BIN_ADD_4BIT.VHD.
    Found 4-bit xor3 for signal <sum>.
    Summary:
	inferred   4 Xor(s).
Unit <bin_add_4bit> synthesized.


Synthesizing Unit <bcd_add_1dig>.
    Related source file is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_1DIG.VHD.
Unit <bcd_add_1dig> synthesized.


Synthesizing Unit <complement>.
    Related source file is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/COMPLEMENT.vhd.
    Found 1-bit xor2 for signal <$n0001> created at line 25.
    Found 3 1-bit 2-to-1 multiplexers.
Unit <complement> synthesized.


Synthesizing Unit <bcd_add_sub_1dig>.
    Related source file is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_SUB_1DIG.vhd.
Unit <bcd_add_sub_1dig> synthesized.


Synthesizing Unit <bcd_add_sub_4dig>.
    Related source file is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/BCD_ADD_SUB_4DIG.VHD.
WARNING:Xst:646 - Signal <ct<8>> is assigned but never used.
WARNING:Xst:646 - Signal <ct<7>> is assigned but never used.
WARNING:Xst:646 - Signal <ct<6>> is assigned but never used.
WARNING:Xst:646 - Signal <ct<5>> is assigned but never used.
Unit <bcd_add_sub_4dig> synthesized.


Synthesizing Unit <step_motor_degree_forward_reverse_lcd>.
    Related source file is C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD.VHD.
    Found 1-bit register for signal <lcm_rs>.
    Found 8-bit register for signal <lcm_data>.
    Found 6-bit comparator less for signal <$n0011> created at line 64.
    Found 6-bit adder for signal <$n0019> created at line 65.
    Found 16-bit register for signal <degree>.
    Found 25-bit up counter for signal <divider>.
    Found 6-bit register for signal <lcm_init>.
    Found 4-bit register for signal <pattern>.
    Found 5 1-bit 2-to-1 multiplexers.
WARNING:Xst:646 - Signal <carry> is assigned but never used.
    Summary:
	inferred   1 Counter(s).
	inferred  23 D-type flip-flop(s).
	inferred   1 Adder/Subtracter(s).
	inferred   1 Comparator(s).
Unit <step_motor_degree_forward_reverse_lcd> synthesized.


=========================================================================
HDL Synthesis Report

Macro Statistics
# Registers                        : 5
  16-bit register                  : 1
  6-bit register                   : 1
  1-bit register                   : 1
  8-bit register                   : 1
  4-bit register                   : 1
# Counters                         : 1
  25-bit up counter                : 1
# Multiplexers                     : 26
  2-to-1 multiplexer               : 26
# Adders/Subtractors               : 1
  6-bit adder                      : 1
# Comparators                      : 1
  6-bit comparator less            : 1
# Xors                             : 72
  1-bit xor2                       : 8
  1-bit xor3                       : 64

=========================================================================

=========================================================================
*                         Low Level Synthesis                           *
=========================================================================
Library "C:/Xilinx/data/librtl.xst" Consulted
WARNING:Xst:1290 - Hierarchical block <Mxor__n0001> is unconnected in block <comp>.
   It will be removed from the design.
WARNING:Xst:1290 - Hierarchical block <Mxor__n0001> is unconnected in block <comp>.
   It will be removed from the design.
WARNING:Xst:1290 - Hierarchical block <Mxor__n0001> is unconnected in block <comp>.
   It will be removed from the design.
WARNING:Xst:1290 - Hierarchical block <Mxor__n0001> is unconnected in block <comp>.
   It will be removed from the design.

Optimizing unit <step_motor_degree_forward_reverse_lcd> ...

Optimizing unit <bin_add_4bit> ...

Optimizing unit <bcd_add_sub_4dig> ...

Mapping all equations...
Loading device for application Xst from file 'v200.nph' in environment C:/Xilinx.
Building and optimizing final netlist ...
Found area constraint ratio of 100 (+ 5) on block step_motor_degree_forward_reverse_lcd, actual ratio is 6.
FlipFlop degree_5 has been replicated 1 time(s)
FlipFlop degree_9 has been replicated 1 time(s)

=========================================================================
*                            Final Report                               *
=========================================================================

Device utilization summary:
---------------------------

Selected Device : 2s200pq208-5 

 Number of Slices:                     191  out of   2352     8%  
 Number of Slice Flip Flops:            62  out of   4704     1%  
 Number of 4 input LUTs:               359  out of   4704     7%  
 Number of bonded IOBs:                 17  out of    144    11%  
 Number of GCLKs:                        1  out of      4    25%  


=========================================================================
TIMING REPORT


Clock Information:
------------------
-----------------------------------+------------------------+-------+
Clock Signal                       | Clock buffer(FF name)  | Load  |
-----------------------------------+------------------------+-------+
divider_15:q                       | NONE                   | 15    |
divider_25:q                       | NONE                   | 22    |
clk                                | BUFGP                  | 25    |
-----------------------------------+------------------------+-------+

Timing Summary:
---------------
Speed Grade: -5

   Minimum period: 31.572ns (Maximum Frequency: 31.674MHz)
   Minimum input arrival time before clock: 33.554ns
   Maximum output required time after clock: 9.749ns
   Maximum combinational path delay: No path found

=========================================================================

Completed process "Synthesize".



Started process "Translate".


Command Line: ngdbuild -quiet -dd
c:\newbook\step_motor_degree_forward_reverse_lcd/_ngo -uc
STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCDCF.ucf -p xc2s200-pq208-5
step_motor_degree_forward_reverse_lcd.ngc
step_motor_degree_forward_reverse_lcd.ngd 

Reading NGO file
"C:/NEWBOOK/STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCD/step_motor_degree_forward_reve
rse_lcd.ngc" ...
Reading component libraries for design expansion...

Annotating constraints to design from file
"STEP_MOTOR_DEGREE_FORWARD_REVERSE_LCDCF.ucf" ...

Checking timing specifications ...
Checking expanded design ...

NGDBUILD Design Results Summary:
  Number of errors:     0
  Number of warnings:   0

Writing NGD file "step_motor_degree_forward_reverse_lcd.ngd" ...

Writing NGDBUILD log file "step_motor_degree_forward_reverse_lcd.bld"...

NGDBUILD done.

Completed process "Translate".



Started process "Map".

Using target part "2s200pq208-5".
Removing unused or disabled logic...
Running cover...
Running directed packing...
Running delay-based LUT packing...
Running related packing...

Design Summary:
   Number of errors:      0
   Number of warnings:    0
   Number of Slices:                181 out of  2,352    7%
   Number of Slices containing
      unrelated logic:                0 out of    181    0%
   Number of Slice Flip Flops:       54 out of  4,704    1%
   Total Number 4 input LUTs:       343 out of  4,704    7%
      Number used as LUTs:                        326
      Number used as a route-thru:                 17
   Number of bonded IOBs:            17 out of    140   12%
      IOB Flip Flops:                               8
   Number of GCLKs:                   1 out of      4   25%
   Number of GCLKIOBs:                1 out of      4   25%
Total equivalent gate count for design:  2,725
Additional JTAG gate count for IOBs:  864
Peak Memory Usage:  55 MB

Mapping completed.
See MAP report file "step_motor_degree_forward_reverse_lcd_map.mrp" for details.

Completed process "Map".

Mapping Module step_motor_degree_forward_reverse_lcd . . .
MAP command line:
map -quiet -p xc2s200-pq208-5 -cm area -pr b -k 4 -c 100 -tx off -o step_motor_deg