route.fit

用verlog HDL写的电子日历,可以显示年,月,日和时间,具有闹铃的功能

-- MAX+plus II Compiler Fit File      
-- Version 10.1 06/12/2001            
-- Compiled: 05/22/2005 23:21:17      

-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "route"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk_4Hz"                      : INPUT_PIN  = 1      ;
    "mode"                         : INPUT_PIN  = 2      ;
    "select"                       : INPUT_PIN  = 43     ;
    "set"                          : INPUT_PIN  = 42     ;
    "disp_mode0"                   : OUTPUT_PIN = 73     ;
    "disp_mode1"                   : OUTPUT_PIN = 48     ;
    "sel0"                         : OUTPUT_PIN = 72     ;
    "sel1"                         : OUTPUT_PIN = 16     ;
    "set_ahr"                      : OUTPUT_PIN = 71     ;
    "set_amin"                     : OUTPUT_PIN = 69     ;
    "set_day"                      : OUTPUT_PIN = 78     ;
    "set_hr"                       : OUTPUT_PIN = 80     ;
    "set_min"                      : OUTPUT_PIN = 70     ;
    "set_mon"                      : OUTPUT_PIN = 49     ;
    "set_sec"                      : OUTPUT_PIN = 19     ;
    "set_week"                     : OUTPUT_PIN = 18     ;
    "set_year"                     : OUTPUT_PIN = 17     ;
    ":18"                          : LOCATION   = LC7_A16;
    ":29"                          : LOCATION   = LC2_A16;
    ":30"                          : LOCATION   = LC1_A24;
    ":81"                          : LOCATION   = LC1_A16;
    ":82"                          : LOCATION   = LC3_A16;
    ":106"                         : LOCATION   = LC4_A21;  -- loop11
    ":107"                         : LOCATION   = LC3_A21;  -- loop10
    ":121"                         : LOCATION   = LC5_A21;  -- num10
    ":128"                         : LOCATION   = LC2_A21;
    ":129"                         : LOCATION   = LC4_A24;
    ":146"                         : LOCATION   = LC5_A24;
    "~146~1"                       : LOCATION   = LC1_A21;
    ":163"                         : LOCATION   = LC6_A24;
    ":179"                         : LOCATION   = LC2_A24;
    ":196"                         : LOCATION   = LC6_A16;
    ":213"                         : LOCATION   = LC3_A24;
    ":226"                         : LOCATION   = LC5_A16;
    ":243"                         : LOCATION   = LC4_A16;
    ":261"                         : LOCATION   = LC8_A16;

END;

INTERNAL_INFO "route"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC4_A21,->LC3_A21,->LC5_A21|2:CH0R0,PA19R0C20->LC2_A21,->LC1_A21,->LC4_A21,->LC3_A21,->LC5_A21||";
    OD1P2   : LORAX = "1:FB1->LC2_A16,->LC1_A24|2:FH1R0,PA13R0C15->LC1_A16,->LC3_A16,->LC2_A16||";
    OD5P43  : LORAX = "1:FB5->LC1_A16,->LC3_A16|";
    OD3P42  : LORAX = "1:FB3|2:FH3R0,PA5R0C20->LC4_A21,->LC3_A21,->LC5_A21,->LC2_A21,->LC1_A21||";
    LC2_A16 : LORAX = "1:MSW2R0C14|2:V7C14->OV3C14P48|,2:HHR1R0,PA0R0C20->LC1_A21||";
    LC1_A24 : LORAX = "1:MSW0R0C23,HHR20R0->OH0R0P73|2:PA16R0C15->LC7_A16,->LC2_A16,->LC6_A16,->LC5_A16||";
    LC1_A16 : LORAX = "1:MSW0R0C15,G42R0->OH8R0P16,2:PA17R0C23->LC4_A24,->LC5_A24,->LC6_A24,->LC2_A24,->LC3_A24||";
    LC3_A16 : LORAX = "1:MSW2R0C15,HHR14R0->OH2R0P72|2:PA1R0C23->LC4_A24,->LC5_A24,->LC6_A24,->LC2_A24,->LC3_A24||";
    LC2_A21 : LORAX = "1:MSW1R0C20,HHR2R0,PA20R0C15->LC5_A16,->LC4_A16,->LC8_A16|";
    LC4_A24 : LORAX = "1:MSW0R0C22,V0C22->OV0C22P80|";
    LC1_A21 : LORAX = "1:MSW0R0C20,HHR21R0|2:PA15R0C15->LC6_A16|,2:PA15R0C23->LC4_A24,->LC5_A24,->LC6_A24,->LC2_A24,->LC3_A24||";
    LC5_A24 : LORAX = "1:MSW4R0C23,HHR30R0->OH4R0P70|";
    LC6_A24 : LORAX = "1:MSW6R0C22,G82R0->OH14R0P19|";
    LC2_A24 : LORAX = "1:MSW2R0C22,G10R0->OH10R0P17|";
    LC6_A16 : LORAX = "1:MSW5R0C15,V16C15->OV3C15P49|";
    LC3_A24 : LORAX = "1:MSW2R0C23,V6C23->OV0C23P78|";
    LC5_A16 : LORAX = "1:MSW4R0C15,G60R0->OH12R0P18|";
    LC4_A16 : LORAX = "1:MSW3R0C15,G15R0->OH3R0P71|";
    LC8_A16 : LORAX = "1:MSW7R0C15,HHR27R0->OH7R0P69|";
	LC7_A16 : LORAX2 = "X, X, LC1_A24, LC2_A16";
	LC2_A16 : LORAX2 = "X, LC1_A24, LC7_A16, LC2_A16";
	LC1_A24 : LORAX2 = "X, X, X, LC1_A24";
	LC1_A16 : LORAX2 = "LC1_A16, LC3_A16, LC7_A16, LC2_A16";
	LC3_A16 : LORAX2 = "LC3_A16, LC1_A16, LC7_A16, LC2_A16";
	LC4_A21 : LORAX2 = "X, LC3_A21, LC4_A21, OD3P42";
	LC3_A21 : LORAX2 = "X, LC3_A21, LC4_A21, OD3P42";
	LC5_A21 : LORAX2 = "X, LC3_A21, LC4_A21, OD3P42";
	LC2_A21 : LORAX2 = "X, OD3P42, LC5_A21, OD4P1";
	LC4_A24 : LORAX2 = "LC3_A16, LC1_A16, LC1_A21, LC1_A24";
	LC1_A21 : LORAX2 = "OD3P42, LC5_A21, OD4P1, LC2_A16";
	LC5_A24 : LORAX2 = "LC3_A16, LC1_A16, LC1_A21, LC1_A24";
	LC6_A24 : LORAX2 = "LC3_A16, LC1_A16, LC1_A21, LC1_A24";
	LC2_A24 : LORAX2 = "LC3_A16, LC1_A16, LC1_A21, LC1_A24";
	LC6_A16 : LORAX2 = "LC3_A16, LC1_A16, LC1_A21, LC1_A24";
	LC3_A24 : LORAX2 = "LC3_A16, LC1_A16, LC1_A21, LC1_A24";
	LC5_A16 : LORAX2 = "X, LC2_A21, LC1_A24, LC2_A16";
	LC4_A16 : LORAX2 = "LC3_A16, LC1_A16, LC2_A21, LC7_A16";
	LC8_A16 : LORAX2 = "LC3_A16, LC1_A16, LC2_A21, LC7_A16";
END;