test.fit.qmsg

uart 通用异步接受机 编译环境为quartus

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 5.0 Build 148 04/26/2005 SJ Full Version " "Info: Version 5.0 Build 148 04/26/2005 SJ Full Version" {  } {  } 0} { "Info" "IQEXE_START_BANNER_TIME" "Fri Dec 02 13:29:59 2005 " "Info: Processing started: Fri Dec 02 13:29:59 2005" {  } {  } 0}  } {  } 4}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off test -c test " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off test -c test" {  } {  } 0}
{ "Info" "IMPP_MPP_AVAILABLE_IO_STANDARD_IN_DEVICE" "EPM7128SLC84-6 " "Info: Auto device selection -- successful I/O standard check for EPM7128SLC84-6" {  } {  } 0}
{ "Info" "IMPP_MPP_AVAILABLE_PCI_IO_IN_DEVICE" "EPM7128SLC84-6 " "Info: Auto device selection -- successful PCI I/O clamp diode check for EPM7128SLC84-6" {  } {  } 0}
{ "Info" "IMPP_MPP_AUTO_ASSIGNED_DEVICE" "test EPM7128SLC84-6 " "Info: Automatically selected device EPM7128SLC84-6 for design test" {  } {  } 0}
{ "Info" "IMPP_MPP_FIT_WITH_SMALLER_DEVICE" "" "Info: Fitting design with smaller device may be possible, but smaller device must be specified" {  } {  } 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 0 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 0 warnings" { { "Info" "IQEXE_END_BANNER_TIME" "Fri Dec 02 13:30:00 2005 " "Info: Processing ended: Fri Dec 02 13:30:00 2005" {  } {  } 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:01 " "Info: Elapsed time: 00:00:01" {  } {  } 0}  } {  } 0}