In August of 1992 LTC published Application Note 49, “Illumination Circuitry for Liquid Crystal Displays.” One notable aspect of this event is that it generated more response than all previous LTC application notes combined. This level of interest, along with significant performance advances since AN-49’s appearance, justifies further discussion of LCD backlighting circuitry.
上传时间: 2013-11-19
上传用户:lanjisu111
为解决直流逆变交流的问题,有效地利用能源,让电源输出最大功率,设计了高性能的基于IR2101最大功率跟踪逆变器,并以SPMC75F2413A单片机作为主控制器。高电压、高速功率的MOSFET或IGBT驱动器IR2101采用高度集成的电平转换技术,同时上管采用外部自举电容上电,能够稳定高效地驱动MOS管。该逆变器可以实现DC/AC的转换,最大功率点的跟踪等功能。实际测试结果表明,该逆变器系统具有跟踪能力强,稳定性高,反应灵敏等特点,该逆变器不仅可应用于普通的电源逆变系统,而且可应用于光伏并网发电的逆变系统,具有广泛的市场前景。 Abstract: To solve the problem of DC-AC inverter, and to utilize solar energy more efficiently, the design of maximum power point tracking inverter based on IR2101 was achieved with a high-performance, which can make the system output power maximum. SPMC75F2413A was adopted as main controller. IR2101 is a high voltage, high speed power MOSFET and IGBT driver. It adopted highly integrated voltage level transforming technology, and an external bootstrap capacitor was used, which could drive MOS tube efficiently and stably. Many functions are achieved in the system, such as DC/AC conversion, maximun power point tracking, etc. The actual test result shows that the inverter system has characteristics of strong tracking ability, high stability and reacting quickly. The design can not only be used in ordinary power inverter system, but also be used in photovoltaic power inverter system. The design has certain marketing prospects
上传时间: 2013-11-17
上传用户:lliuhhui
The P89LPC912/913/914 are single-chip microcontrollers in low-cost 14-pin packages, based on a high performance processor architecture that executes instructions in two to four clocks, six times the rate of standard 80C51 devices. Many system level functions have been incorporated into the P89LPC912/913/914 in order to reduce component count, board space, and system cost.
上传时间: 2013-10-12
上传用户:司令部正军级
为解决我国水位监测野外条件下长期无人看守的问题,研制开发了基于MSP430单片机的智能水位计。从其组成到各功能分别进行了详细的介绍,该智能水位计不仅实现了水位数据的实时监测、记录和定期采集等多种工作模式,而且提高了水位监测精度,实现了水位监测的智能化。 Abstract: In order to solve the problems of long-term unmanned observation in the field water monitoring,an intelligence water-level meter based on MSP430 is developed composition and every function moduce of the water level meter was introduced in detail. It not only realizes water level data collection and storage, regularly gathering and so on, but also improves the water-level precision , finally realizes the intelligence.
上传时间: 2013-11-17
上传用户:417313137
为了使音频信号分析仪小巧可靠,成本低廉,设计了以2片MSP430F1611单片机为核心的系统。该系统将音频信号送入八阶巴特沃兹低通滤波器,对信号进行限幅放大、衰减、电平位移、缓冲,并利用一单片机负责对前级处理后的模拟信号进行采样,将采集得到的音频信号进行4 096点基2的FFT计算,并对信号加窗函数提高分辨率,另一单片机负责对信号的分析及控制显示设备。此设计精确的测量了音频信号的功率谱、周期性、失真度指标,达到较高的频率分辨率,并能将测量结果通过红外遥控器显示在液晶屏上。 Abstract: o make the audio signal analyzer cheaper, smaller and more reliable, this system sends the audio signal to the eight-order butterworth filter, and then amplifies, attenuates, buffers it in a limiting range, transfers the voltage level of the signal before utilizing two MSP430F1611 MCU to realize the audio analysis. One is charged for sampling and dealing with the processed audio signal collected by the 4096 point radix-2 FFT calculation and imposes the window function to improve the frequency resolution. The other one controls the display and realizes the spectrum, periodicity, power distortion analysis in high resolution which is displayed in the LCD screen through the infrared remote control.
上传时间: 2013-12-11
上传用户:jasonheung
为了有效地提升铅酸蓄电池的使用寿命,同时实现对充电过程的监控,设计出一种用单片机控制的36 V铅酸蓄电池充电电源。本电路采用反激式拓扑,连续电流工作模式,电源管理IC设计在电源的副边,由ELAN公司的EM78P258N单片机模拟,是用可编程器件模拟电源管理IC,实现智能电源低成本化的一次成功尝试,通过对单片机的软件设计实现了充电电源的状态显示、充电时间控制、报警、过温保护、过压保护、过流保护等功能。本充电器真正的实现了铅酸蓄电池的三段式充电过程,其最高输出功率可达90 W,效率约85%,成本不到20元,具有很高的市场竞争力。 Abstract: In order to extend the life of lead-acid battery efficiently and supervise the charging process meanwhile, a 36V lead-acid battery charge powe supply controlled by microcontroller is designed. The charger is flyback switching power supply and works in CCM mode. A EM78P258N microcontroller made by ELAN microelectronics corporation is used as power management IC which is designed at the secondary circuit. The project is a successful attempt to low-cost intelligent power used microcontroller simulating power management IC. The charger also has the functions of the status reveal, charge time control, alarming, thermal protect, current limit and overvoltage protect by the software design. The circuit actually implements the three-step charge process, whose power is up to 90W and whose efficiency can get 85%. The net cost of this charger is less than 20 RMB, so that the charger is of powerful market competitiveness.
上传时间: 2013-11-16
上传用户:cepsypeng
提出一种基于凌阳单片机的步进电机加减速的控制方法。采用凌阳科技推出的16位结构工控单片机SPMC75F2413A为控制器,由Allegro公司生产的两相步进电机专用驱动器件SLA7042M构成步进电机的驱动电路,在传统的3段直线加减速控制算法基础上增加至7段S形曲线加减速过程,控制步进电机的启动和停止。实验结果表明,该控制方法克服了直线加减速中不连续、易造成系统冲击的问题,整个系统实现柔性控制,电机启动、停止连续性能提高30%。 Abstract: The method of controlled stepping motor is referred based on SPMC75F2413A MCU, which adopts the 16 knots SPMC75F2413A MCU as the controller. The special-purpose actuation chip SLA7042M of two stepping motor produced by Allegro Corporation constituted to actuation electric circuit. The purpose of increasing to seven section of S shape curve based on the traditional three sections of straight line is to control the start and stop process of stepping motor. The experimental results show that the control method solves easy to pull-out and overshot problems. The overall system realizes flexible control, and the performance of motor start or stop continuity is increased 30%
上传时间: 2013-12-08
上传用户:jiangfire
介绍一种基于C8051F060单片机和NAND Flash的数据采集存储系统,该系统可实现3路信号采样,每路采样率为5KS/s,通过异步串行通信接口实现数据传输。并详细说明系统的软件设计。 Abstract: An acquisition and storage system based on C8051F060and NAND Flash is designed in this paper.The system is used to sample three-channel of signal,5KSPS each channel,and can upload data to test bench through UART(Universal Asynchronous Receiver/Transmitter).The software design is discussed in detail.
上传时间: 2013-10-12
上传用户:Jesse_嘉伟
Mega16是一款采用先进RISC精简指令,内置A/D的8位单片机,可支持低电压联机 Flash和EEPROM 写入功能;同时还支持 Basic和C 等高级语言编程。用它设计电子时钟不仅成本低,硬件简单,而且很容易实现系统移植。介绍了如何利用AVR系列单片机Mega16及1602字符液晶来设计电子时钟的方法,同时给出了相应的电路原理及部分语言程序。 Abstract: ?Mega16 is a high-performance, low power consumption, the use of advanced RISC concise instructions, built-in A/D 8-bit microcontrollers, the on-line support for low-voltage Flash, EEPROM write function. Except Mega16 also support the Basic, C, and other high-level language programming.The electronic clock which is deisgned by Mega16 is not only low-cost, simple hardware, but easy to achieve system migration.The design method of electrioic clock based on the AVR Mega16 and character LCD1602 is introduced in this paper,and the corresponding circuit electrionic and some language program are given.
上传时间: 2014-12-27
上传用户:zl5712176
介绍了基于单片机C8051F020的通用串口适配器的设计与实现方法,即由单片机控制的智能化一对多口收发信号转换器。通过采用C51对单片机进行编程,控制与RS-232(标准RS-232电平)、RS232(TTL电平)、RS-422接口的数据通信;采用C++ Builder作为开发平台,通过RS-232接口实现上位机对适配器各个通信端口的控制。 Abstract: Design and realization of a universal serial port adapter based on the MCU C8051F020 are introduced.The adapter is an intelligent one-to-more receiving and transmitting signal converter controlled by the MCU. By programming the MCU with the language C51,MCU control data communication between the MCU and RS-232(RS-232 level),RS-232(TTL level),RS-422 port; Using C++ Builder as the development plane, by one RS232 port, the upper PC can control each of the communication port of the adapter.
上传时间: 2013-11-19
上传用户:hebanlian