以单片机控制A/D转换器TLC549为例,对A/D转换器的主要技术指标进行了分析研究,在Proteus平台下,完成了A/D转换电路的构建,采用器件工作时序方式进行程序编写,借助仿真图表、虚拟仪器等工具对A/D转换的数据进行测量并对失调误差、增益误差、微分非线性、积分非线性和转换时间等重要参数进行了详细分析。结果表明:使用Proteus软件可对A/D转换过程进行定性分析,将抽象的A/D转换器技术指标直观化、形象化展现出来,有助于学生更好地理解A/D转换过程。The main technical indicators of A/D converter were analyzed and studied with an example from A/D converter TLC2543 which is controlled by using SCM.It was completed the construction of the A/D converter circuit under the Proteus software.The programming based on the operation sequence of the chip is put forward.With the aid of the simulation tools such as virtual instrument,simulation charts provided by Proteus,the important parameters of circuit such as offset error,gain error,differential nonlinearity(DNL),integral nonlinearity (INL) and conversion time are analyzed detailedly.simulation results show that the A/D conversion process can be qualitatively analyzed and visualized the abstract indicators of A/D.The system can help students better to understand the SCM conversion process.
上传时间： 2022-04-04
上传用户：
抢答器是一种智力竞赛常用的器件,抢答器的设计方法千差万别,文章利用常用的数字电子器件,设计了八路抢答器电路的设计、仿真及实现的全过程,提出两种可行的设计方案:方案1采用74ls373实现电路锁存,74ls148实现电路编码,74ls74及数码管实现电路显示;方案二采用CD4511BCN和LMC555CM集成电路及数码管实现抢答器的控制和显示。本文设计用的器件简单,容易理解,适用于初学电子技术的人员。Answer scrambler is a common device in intelligence competition, and its design methods vary greatly. This paper designs the whole process of design, simulation and Realization of the circuit of eight-way answer scrambler by using common digital electronic devices, and puts forward two feasible design schemes: scheme 1 uses 74 ls373 to realize circuit latching, 74 ls148 to realize circuit coding,74 ls74 and digital tube to realize circuit. The second scheme uses CD4511 BCN, LMC555 CM integrated circuit and digital tube to control and display the answerer. The device designed in this paper is simple and easy to understand, and it is suitable for the beginners of electronic technology.
标签： 抢答器
上传时间： 2022-04-05
上传用户：
实验教学一直是工科教学中不可或缺的组成部分,对培养学生的动手能力,独立思考能力,创新思维与发散思维具有重要的作用。针对目前电路教学实验中电路仿真实验与实物电路实验各自独立,无法统一问题,提出将仿真电路实验与实物电路实验有机的结合同步操作,并使用Web发布实现远程实验操作。采用Multisim作为电路实验仿真平台,NI Eiviss II作为实物电路实验硬件平台,运用LabVIEW整合Multisim电路仿真实验与实物电路实验,实现仿真与实物实验有机结合,两种实验可同步进行。学生在仿真实验中先可探索实验,然后做实物实验。同时运用LabVIEW开发出实验过程人机交互操作接口界面,使用过程中效果良好。Experimental teaching has always been an indispensable part of engineering education.And it always plays an important role in cultivating students'practical ability,independent thinking ability,innovative thinking and divergent thinking.But simulation experiment and physical experiment cannot be unified in the circuit teaching experiment at present.In order to solve this problem,this paper proposes to combine organically the simulation circuit experiment with physical circuit experiment,and synchronously operate them.This paper uses the WEB publishing to achieve remote experimental operation.Multisim is used as the circuit simulation platform,and NI Eiviss II is used as the physical circuit hardware platform.Multisim circuit simulation experiment and physical circuit experiment are implemented by LabVIEW to realize the combination of simulation experiment and physical experiment.Students do explore experiments in simulation experiment firstly,and then do physical experiment.And this paper uses LabVIEW to develop the experimental man-machine interface.
上传时间： 2022-04-05
上传用户：
为适应双向DC/DC功率变换的电流采样需求,一种高精度高边电流采样电路被提出。其基本思想是在功率电路的高边串入采样电阻,借助电流镜原理并引入偏置电流电路,将双向电流均转换为正向电压输出。通过理论分析与仿真结合的方法对电流镜采样原理及4种不同的偏置电流电路方案进行对比,最后通过实验数据验证了高精度高边电流采样电路的有效性。实验数据表明,该采样电路可在-25~75℃的温度工作范围内,针对-10~＋10 A范围内的电流采样实现优于5%的采样精度。Current sensing plays an important role in controlling,monitoring or protection functions of power systems.To meet the current sensing requirement of bidirectional DC/DC converters,a high-accuracy bidirectional current sensing circuit is proposed.The proposed current sensing circuit inserts a resistor in the path of the current to be sensed,while the current mirror and biased current circuit are introduced.Therefore,the bidirectional current can be expressed by positive voltage.By theoretical analysis and simulation,the sampling theory is analyzed and four biased current circuits are compared.At last,experimental results verified the proposed method.It is demonstrated that the proposed current sensing circuit can achi...
上传时间： 2022-04-22
上传用户：
针对交流电路过零检测电路存在结构复杂、过零点检测不准确、编程繁琐等问题，设计了一种基于LM339的硬件结构简单的过零检测电路。通过仿真软件Mulisim对该设计电路进行了仿真，实验证明了该方案过零检测的可行性、稳定性和可靠性，可直接作为交流电路中CPU的过零信号。Aiming at the problems of AC cilsuit zero crossing detection circuit such as complex structure, zero crossing detection and cumbersome programming, a zero crossing detection circuit with simple hardware structure based on LM339 was designed. The design circuit was simulated by simulation software Mulisim, and the feasibility, stability and reliability of zero crossing detection were proved by experiments, which can be used as zero crossing signal of CPU in AC circuit directly.
上传时间： 2022-05-03
上传用户：
基于PSIM仿真软件，分析了Boost电路拓扑结构，设定了参数要求进行电路仿真设计，通过电路仿真软件PSIM对Boost电路工作在CCM模式下，合理设置占空比参数。实验结果表明理论分析与仿真的一致性和参数设计的正确性，输出电压和电流参数稳定，Boost电路输出效率高。This design is based on PSIM simulation software,analyzes the topology of Boost circuit,sets the parameter re- quirements for circuit simulation design,and reasonably sets the duty cycle parameters for Boost circuit working in CCM mode through PSIM simulation software.The experimental results show that the theoretical analysis and simulation are consis- tent and the parameter design is correct,the output voltage and current parameters are stable.
上传时间： 2022-05-04
上传用户：
以STM32F103C8T6为核心,设计了无刷直流电机控制器硬件电路。电路主要包括IR2310构成的PWM驱动电路、IRF3808构成的逆变电路、增量式旋转编码构成的速度反馈电路。控制器具有CAN和RS232通信接口,可与计算机或PLC构成速度或位置伺服系统。利用由xPC目标搭建的半实物仿真平台对PI参数进行整定。测试了控制器的速度伺服响应性能,给定速度为2400rpm时,控制器响应时间为0.32s。实验结果表明,系统工作可靠,稳定性好,响应速度快,可以满足上肢康复机器人的机械臂速度控制性能要求。The hardware circuit of Brushless DC motor controller is designed by taking STM32F103C8T6 as the core,which mainly includes PWM driving circuits made up of IR2310,inverter circuit formed by IRF3808,speed feedback circuit composed of incremental rotary encoder and so on.Speed servo control system or position servo control system can be composed of BLDM controller with computer or PLC through CAN communication interface or RS232 serial communication interface.By using the hardware in the loop simulation platform built by xPC target,the PI parameters are set up.The Speed servo response performance of the controller is tested.When the speed is 2 400 rpm,the response time of the controller is 0...
上传时间： 2022-05-07
上传用户：
为了实时检测血氧量,能使缺氧特别敏感的脑组织或心脏类疾病患者得到及时治疗,采用近红外双波长透射式光电脉搏血氧测定法,以H桥电路对发射光源进行控制及通用运算放大器搭建滤波电路。运用参数理论计算和计算机仿真结果相对比的方法,通过Mu ltisim软件对所设计电路进行仿真,仿真结果与理论参数计算相吻合,证明了电路参数设计的可行性,为血氧仪的实物制作提供参考。For real-time detection of oxygen saturation for timely treatment of the brain or heart,which are very sensitive to oxygen inadequacy,the near-infrared wavelengths double photoelectric pulse oximeter transmission method is adopted.The illuminant is controlled with the H bridge circuit and the filter circuit is built with general op-amps.Parameters by theoretical calculation is compared with the computer simulation results in Multisim and satisfactory results are obtained.It is shown that the design of the circuit parameters is feasible and can be a help in making the physical blood-oxygen monitor.
上传时间： 2022-05-12
上传用户：
说明： 基于51单片机的数字直流电压表相关材料，内容有原理图，仿真文件，论文材料，程序源码等。(The related materials of digital DC voltmeter based on 51 single chip computer include schematic simulation files, paper materials, program source code, etc.)
上传时间： 2022-05-16
上传用户：fliang
说明： 89C52单片机数控直流稳压电源的Proteus仿真+Keil C源码(SCM simulation+ NC DC power supply source)
上传时间： 2022-05-16
上传用户：xsr1983
