为解决移相全桥电路驱动及相角控制问题,设计了一种数字控制的移相全桥驱动电路.以TPL521为光耦隔离、IR2110为栅极驱动芯片.由DSP产生PWM信号,经过光耦隔离和逻辑电路后送至IR2110进行相角控制.文章对IR2110驱动电路原理进行分析及参数进行设计,对TMS320F28335进行设置并给出部分代码.实验结果表明：通过TMS320F28335可产生的不同相角的PWM波形,满足了移相全桥对不同相角控制的要求.In order to solve the problem of phase-shifted full-bridge circuit driving and phase angle control,a digitally controlled phaseshifted full-bridge driving circuit was designed. TPL521 optocoupler isolation,IR2110 gate driver chip. PWM signals are generated by the DSP and sent to the IR2110 for phase angle control after optocoupler isolation and logic circuits. This text carries on the analysis to the principle of IR2110 drive circuit and parameter design,set up and give out some code to TMS320F28335. The experimental results show that the PWM waveforms with different phase angles generated by TMS320F28335 can meet the requirements of phase-shifted full-bridge control for different phase angles.
上传时间： 2022-05-03
上传用户：zhanglei193
基于TMS320F28335的超声波流量计硬件原理图+软件源码本文以TMS320F28335 处理器为核心，设计一种用于管道流量测量的超声波流量计。系统硬件由核心板，超声波发射和接收电路，切换电路，超声换能器，基于ADS805 的高速信号采集电路，人机交互以及电源等模块构成。采用时差法进行管道流量测量，时差测量采用SCOT 加权的广义互相关时延估计算法。本论文设计的超声波流量计具有测量速度快、准确性好、成本低等优点。关键字：C2000，超声波，流量，广义互相关算法AbstractA kind of ultrasonic flowmeter using for the pipe flow measurement is designed based onTMS320F28335 in this paper. The system hardware consists of the following parts: the core board,ultrasonic signal transmitter and receiver circuits, switch circuit, ultrasonic transducer, signalacquisition circuit based on ADS805, human-computer interaction module and power supplymodule, etc. The system use the method of time difference for pipeline flow measurement and thetime difference is calculated by the time-delay algorithm of SCOT weighted generalizedcross-correlation. The ultrasonic flowmeter has the features of high testing speed, high precisionand low cost, etc.Keywords: C2000,Ultrasonic, Flow, Generalized Cross-Correlation Algorithm
标签： tms320f28335 超声波流量计
上传时间： 2022-05-06
上传用户：
以STM32F103C8T6为核心,设计了无刷直流电机控制器硬件电路。电路主要包括IR2310构成的PWM驱动电路、IRF3808构成的逆变电路、增量式旋转编码构成的速度反馈电路。控制器具有CAN和RS232通信接口,可与计算机或PLC构成速度或位置伺服系统。利用由xPC目标搭建的半实物仿真平台对PI参数进行整定。测试了控制器的速度伺服响应性能,给定速度为2400rpm时,控制器响应时间为0.32s。实验结果表明,系统工作可靠,稳定性好,响应速度快,可以满足上肢康复机器人的机械臂速度控制性能要求。The hardware circuit of Brushless DC motor controller is designed by taking STM32F103C8T6 as the core,which mainly includes PWM driving circuits made up of IR2310,inverter circuit formed by IRF3808,speed feedback circuit composed of incremental rotary encoder and so on.Speed servo control system or position servo control system can be composed of BLDM controller with computer or PLC through CAN communication interface or RS232 serial communication interface.By using the hardware in the loop simulation platform built by xPC target,the PI parameters are set up.The Speed servo response performance of the controller is tested.When the speed is 2 400 rpm,the response time of the controller is 0...
上传时间： 2022-05-07
上传用户：
基于DSP28335的永磁同步电机调速系统设计摘要（中英文） 本控制系统的设计是为了实现基于TMS320F28335的永磁同步电动机的调速系统，并把它引用到全电动注塑机当中。本系统使用SVPWM的控制方法，通过采样电机电流和旋转变压器的位置信息，实现速度、电流双闭环控制。通过TMS320F28335的硬件浮点处理核心，实现应用于永磁同步电机的浮点算法，去取代过去的定点算法，提高代码效率。 Abstract: The control system is designed to realize TMS320F28335 based on the permanent magnet synchronous motor speed control system, and put it to quoting all electric of injection molding machine. The ystem of the control method used SVPWM, through the sampling motor current and rotating transformer 1. 引言1.1 设计背景及目的 本永磁同步电机调速系统是全电动注塑机的其中一个应用部分。全电动注塑机凭借着其节约能源、清洁、噪声少、速度控制效果好、精度高、可重复性高、成本低等众多优点，成为了当下高端注塑机发展的一个方向。 全电动注塑机的所有运动机构都采用交流伺服电动机驱动，一个稳定高效的永磁同步电动机驱动方案成为了全电动注塑机性能的一个总要部分。本次设计以适用于全电动注塑机的永磁同步电动机控制系统为目标进行设计，采用TI公司的TMS320F28335作为控制核心。凭借TMS320F28335高速的运算能力，适用于电动机控制的各种外设，以及TMS320F283XX特有的硬件浮点运算能力，进行永磁同步电动机的调速控制系统的设计。
上传时间： 2022-05-08
上传用户：
数字频率计是电工电子中常用的测量仪器,数字频率计通过用输入待测信号对一特定长度的信号进行计数,从而得出频率并通过数码管直观的显示出来。本文提出了一种与输入同步的数字频率计的设计,提高了频率计的精度,设计采用Multisim软件进行设计和仿真的过程,介绍了其工作原理,硬件电路设计和仿真的过程。设计采用了Multisim软件进行设计和仿真,设计结果得到的验证。Digital frequency counter is used to measure the frequency of a signal.It is common to use a multivibrator to generate a standard 1 second time base signal and count input signal gated by this signal.However,the asynchronous of this time base signal with input signal will bring errors.In this paper,a high precision frequency counter which use synchronized time base signal generator is proposed.This frequency counter is designed and simulated by Multisim tools and result is verified.
标签： multisim
上传时间： 2022-05-08
上传用户：
CH7525 is a low-cost, low-power semiconductor device that translates the DisplayPort signal to HDMI/DVI. This innovative DisplayPort receiver with an integrated HDMI Transmitter is specially designed to target the notebook/ultrabook, tablet device and PC market segments. Through the CH7525’s advanced decoding / encoding algorithm, the input DisplayPort high-speed serialized multimedia data can be seamlessly converted to HDMI/DVI output.
上传时间： 2022-06-02
上传用户：
German universities and scientists have repeatedly set the intermational standard in drive technology. Identification and active compensation of natural frequencies in oscillatory mechanics, status controls with monitoring structures incorporating acceleration sensors, adaptive compensation of measurement system deficiencies, self-adjusting detent torque compensation… everything invented with only a single aim in mind: to continue improv-ing the motion control, dynamics, precision and processing speed of your machines. For the industrial applicabability of this technology scientific publications in proceedings and laboratory test rigs are not enough. These features consequenty need to be converted into cost-efficient and easily manageable products. That 's exactly what we have done.So in future, if you should need more than today ' smarket can offer you, now everything isgoing to be alright. With our new high-performance ServoOne drive series you will experi-ence
标签： servoone
上传时间： 2022-06-24
上传用户：kingwide
Legal Disclaimer Lenze Semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function or design. Lenze Semiconductor disclaims any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product.Lenze Semiconductor does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling Lenze Semiconductor products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Lenze Semiconductor for any damages arising or resulting from such use or sale.
上传时间： 2022-06-25
上传用户：
1. General Description BL-M3362NS1 product is designed base on Broadcom BCM43362 chipset. It operates at 2.4GHz band and supports IEEE802.11b/g/n 1T1Rwith wireless data rate up to 72.2Mbps. It supports IEEE802.11isafety protocol, along with IEEE802.11e standard service quality. It supports standard interfaces SDIOV2.0(50 MHz,4-bit and1-bit) and generic SPI(up to 50 MHz), Integrated ARM Cortex?-M3 CPUwith on-chip memory enables running IEEE802.11 firmware that can be field-upgraded with future features.2. The range of applying Imaging platforms(printers, digital still cameras, digital picture frames)Consumer electronic devices(DTV, DVDplayers, Blu-ray players. etc.)Gaming platforms Carinformation MiFi/Mobile Routes Smart PAD Set-TopBoxes
标签： wifi
上传时间： 2022-07-04
上传用户：
陀螺仪硬件自检：相关方法陀螺仪允许用户测试机械和电气部分。自检的代码在 InvenSense提供的 MotionApps™软件里面。如果没有使用 MotionApps™软件，请参阅下节(Obtaining the Gyroscope Factory Trim (FT) Value)。当自检启动，片上的电子设备就会启动相应的传感器。这次启动会使传感器的 proofmasses的距离相当于一个预定的科里奥利力（Coriolis force）。传感器的 Proof masses位移变换的结果将在输出信号中反映。输出信号用户可以在自检反馈看到。自检反馈（STR）定于如下：Self Test Response=Gyroscope Output with Self Test Enabled — Gyroscope Output with Self Test Disabled自检反馈通过反馈与出产的评估比较查找变换用于确定这部分通过还是自检失败
上传时间： 2022-07-23
上传用户：xsr1983
