Integrated EMI/Thermal Design forSwitching Power SuppliesWei ZhangThesis submitted to the Faculty of theVirginia Polytechnic Institute and State Universityin partial fulfillment of the requirements for the degree of Integrated EMI/Thermal Design forSwitching Power SuppliesWei Zhang(ABSTRACT)This work presents the modeling and analysis of EMI and thermal performancefor switch power supply by using the CAD tools. The methodology and design guidelinesare developed.By using a boost PFC circuit as an example, an equivalent circuit model is builtfor EMI noise prediction and analysis. The parasitic elements of circuit layout andcomponents are extracted analytically or by using CAD tools. Based on the model, circuitlayout and magnetic component design are modified to minimize circuit EMI. EMI filtercan be designed at an early stage without prototype implementation.In the second part, thermal analyses are conducted for the circuit by using thesoftware Flotherm, which includes the mechanism of conduction, convection andradiation. Thermal models are built for the components. Thermal performance of thecircuit and the temperature profile of components are predicted. Improved thermalmanagement and winding arrangement are investigated to reduce temperature.In the third part, several circuit layouts and inductor design examples are checkedfrom both the EMI and thermal point of view. Insightful information is obtained.
上传时间： 2013-11-16
上传用户：萍水相逢
a8259 可编程中断控制 altera提供 The a8259 is designed to simplify the implementation of the interrupt interface in 8088 and 8086 based microcomputer systems. The device is known as a programmable interrupt controller. The a8259 receives and prioritizes up to 8 interrupts, and in the cascade mode, this can be expanded up to 64 interrupts. An asynchronous reset and a clock input have been added to improve operation and reliability.
上传时间： 2015-01-02
上传用户：panpanpan
这个软件需要你的本机操作的。其他机器是算不出来的！ 就是说 一台电脑只有一个注册码对应！ 这里有个办法： MULTISIM2001安装方法： 一：运行SETUP.EXE安装。在安装时，要重新启动计算机一次。 二：启动后在“开始>程序”中找到STARTUP项，运行后，继续进行安装，安装过程中，第一次要求输入“CODE"码时， 输入“PP-0411-48015-7464-32084"输入后，会提示"VALID SERIAL NUMBER FOR MULTISIM 2001 POWER-PRO." 按确定，又会出现一个“feature code”框，输入“FC-6424-04180-0044-13881”后， 在弹出的对话框中选择“取消”，一路确定即可完成安装。 三：1.运行VERILOG目录内的SETUP安装 2.运行FPGA目录内的SETUP安装 3.将CRACK目录内的LICMGR.DLL拷贝到WINDOWS系统的SYSTEM 目录内 4.并将VERILOG安装目录内的同名文件删除 5.将SILOS.LIC文件拷到VERILOG安装目录内覆盖原文件，并作如下编辑： 6.将“COMPUTER_NAME”替换为你的机器名 7.将“D:\MULTISIM\VERILOG\PATH_TO_SIMUCAD.EXE”替换为你的 实际安装路径。如此你便可以使用VERILOG了。 四：安装之后，运行MULTISIM2001,会要求输入“RELEASE CODE",不用着急， 记下“SERIAL NUMBER"和“SIGNATURE NUMBER", 使用CRACK目录内的注册器“MULTISIM KEYGEN.EXE" 将刚才记下的两个号码分别填入后， 即可得到"RELEASE CODE", 以后就可以正常使用了。 五：接下来运行 database update目录中的几个文件， 进行数据库合并即可。祝你成功！！ 六：启动MULTISIM2001时候的注册码 1： PP-0411-48015-7464-32084 2： 37506-86380 3:的三个空格 1975 2711 4842 里面包含了：Multisim2001汉化破解版、Multisim.V10.0.1.汉化破解版图解 解压密码：www.pp51.com
上传时间： 2013-11-16
上传用户：天空说我在
为了提高直接转矩控制（DTC）系统定子磁链估计精度，降低电流、电压测量的随机误差，提出了一种基于扩展卡尔曼滤波（EKF）实现异步电机转子位置和速度估计的方法。扩展卡尔曼滤波器是建立在基于旋转坐标系下由定子电流、电压、转子转速和其它电机参量所构成的电机模型上，将定子电流、定子磁链、转速和转子角位置作为状态变量，定子电压为输入变量，定子电流为输出变量，通过对磁链和转速的闭环控制提高定子磁链的估计精度，实现了异步电机的无速度传感器直接转矩控制策略，仿真结果验证了该方法的可行性,提高了直接转矩的控制性能。 Abstract: In order to improve the Direct Torque Control（DTC） system of stator flux estimation accuracy and reduce the current， voltage measurement of random error， a novel method to estimate the speed and rotor position of asynchronous motor based on extended Kalman filter was introduced. EKF was based on d-p axis motor and other motor parameters （state vector: stator current， stator flux linkage， rotor angular speed and position； input: stator voltage； output: staror current). EKF was designed for stator flux and rotor speed estimation in close-loop control. It can improve the estimated accuracy of stator flux. It is possible to estimate the speed and rotor position and implement asynchronous motor drives without position and speed sensors. The simulation results show it is efficient and improves the control performance.
上传时间： 2015-01-02
上传用户：qingdou
在Multisim 10软件环境下，设计一种由运算放大器构成的精确可控矩形波信号发生器，结合系统电路原理图重点阐述了各参数指标的实现与测试方法。通过改变RC电路的电容充、放电路径和时间常数实现了占空比和频率的调节，通过多路开关投入不同数值的电容实现了频段的调节，通过电压取样和同相放大电路实现了输出电压幅值的调节并提高了电路的带负载能力，可作为频率和幅值可调的方波信号发生器。Multisim 10仿真分析及应用电路测试结果表明，电路性能指标达到了设计要求。 Abstract: Based on Multisim 10， this paper designed a kind of rectangular-wave signal generator which could be controlled exactly composed of operational amplifier， the key point was how to implement and test the parameter indicators based on the circuit diagram. The duty and the frequency were adjusted by changing the time constant and the way of charging and discharging of the capacitor， the width of frequency was adjusted by using different capacitors provided with multiple switch， the amplitude of output voltage was adjusted by sampling voltage and using in-phase amplifier circuit，the ability of driving loads was raised， the circuit can be used as squarewave signal generator whose frequency and amplitude can be adjusted. The final simulation results of Multisim 10 and the tests of applicable circuit show that the performance indicators of the circuit meets the design requirements.
上传时间： 2014-01-21
上传用户：shen007yue
12864液晶时钟显示程序 LCD 地址变量 ;**************变量的定义***************** RS BIT P2.0 ;LCD数据/命令选择端(H/L) RW BIT P2.1 ;LCD读/写选择端(H/L) EP BIT P2.2 ;LCD使能控制 PSB EQU P2.3 RST EQU P2.5 PRE BIT P1.4 ;调整键(K1) ADJ BIT P1.5 ;调整键(K2) COMDAT EQU P0 LED EQU P0.3 YEAR DATA 18H ;年,月,日变量 MONTH DATA 19H DATE DATA 1AH WEEK DATA 1BH HOUR DATA 1CH ;时,分,秒,百分之一秒变量 MIN DATA 1DH SEC DATA 1EH SEC100 DATA 1FH STATE DATA 23H LEAP BIT STATE.1 ;是否闰年标志1--闰年，0--平年 KEY_S DATA 24H ;当前扫描键值 KEY_V DATA 25H ;上次扫描键值 DIS_BUF_U0 DATA 26H ;LCD第一排显示缓冲区 DIS_BUF_U1 DATA 27H DIS_BUF_U2 DATA 28H DIS_BUF_U3 DATA 29H DIS_BUF_U4 DATA 2AH DIS_BUF_U5 DATA 2BH DIS_BUF_U6 DATA 2CH DIS_BUF_U7 DATA 2DH DIS_BUF_U8 DATA 2EH DIS_BUF_U9 DATA 2FH DIS_BUF_U10 DATA 30H DIS_BUF_U11 DATA 31H DIS_BUF_U12 DATA 32H DIS_BUF_U13 DATA 33H DIS_BUF_U14 DATA 34H DIS_BUF_U15 DATA 35H DIS_BUF_L0 DATA 36H ;LCD第三排显示缓冲区 DIS_BUF_L1 DATA 37H DIS_BUF_L2 DATA 38H DIS_BUF_L3 DATA 39H DIS_BUF_L4 DATA 3AH DIS_BUF_L5 DATA 3BH DIS_BUF_L6 DATA 3CH DIS_BUF_L7 DATA 3DH DIS_BUF_L8 DATA 3EH DIS_BUF_L9 DATA 3FH DIS_BUF_L10 DATA 40H DIS_BUF_L11 DATA 41H DIS_BUF_L12 DATA 42H DIS_BUF_L13 DATA 43H DIS_BUF_L14 DATA 44H DIS_BUF_L15 DATA 45H FLAG DATA 46H ;1-年，2-月，3-日，4-时，5-分，6-秒，7-退出调整。 DIS_H DATA 47H DIS_M DATA 48H DIS_S DATA 49H
上传时间： 2013-12-25
上传用户：wvbxj
Full support for extended regular expressions (those with intersection and complement); Support for some kinds of cycles in grammar; DFA-based operation; Unicode support; C++ only, requires a modern compiler; Lexical analyzers can be configured to get symbols from any input class (built-in support for std::istream, std::wistream and FILE *); Designed to work with Whale, but can work standalone or interface to other parsers.
标签： intersection expressions complement for
上传时间： 2013-12-11
上传用户：zhanditian
RemoteWAP is a Remote Administration Tool for any Operating System that can support the Java Virtual Machine. It has been designed for anyone who wishes to have complete control of there OS anywhere by using a WAP enabled Mobile Phone. RemoteWAP is developed using Java and WML for the client mobile phone front-end pages. RemoteWAP has a Java Swing-GUI to allow for easy control. Future releases will have a Command Line Interface for quick use
标签： Administration RemoteWAP Operating Virtual
上传时间： 2015-02-01
上传用户：exxxds
介绍几种cpuThe 8xC251SA/SB/SP/SQ improves on the MCS-51 architecture and peripheral features, introducing the advanced register based CPU architecture i.e., the MCS 251 microcontroller architecture. The register based CPU supports a 40-byte register file. In addition, the 8xC251SA/SB/SP/SQ microcontroller has 256-Kbyte expanded external code/data memory space and 64-Kbyte stack space. The new controller is also specially designed to execute C code efficiently. More importantly, the 8xC251SA/SB/SP/SQ maintains binary code compatibility with MCS 51 microcontrollers but at the same time allows the use of the powerful MCS 251 microcontroller instruction set, with many new 8, 16 and 32 bit instructions available. The 8xC251SA/SB/SP/SQ has 512 bytes or 1 Kbyte of on-chip data RAM options and is available in 16 Kbytes and 8 Kbytes of on-chip ROM/OTPROM or ROMless options.
标签： architecture introducin peripheral improves
上传时间： 2015-03-15
上传用户：ccclll
Locally weighted polynomial regression LWPR is a popular instance based al gorithm for learning continuous non linear mappings For more than two or three in puts and for more than a few thousand dat apoints the computational expense of pre dictions is daunting We discuss drawbacks with previous approaches to dealing with this problem
标签： polynomial regression weighted instance
上传时间： 2013-11-28
上传用户：sunjet
