This book is based on a Ph.D. research that has been conducted at the Delft University of Technology in the Netherlands in collaboration with Dutch Electricity & Gas Distribution Network Operator, Stedin. This book was written as a result of wider interest that was shown by different industry groups on this topic after its public defence. This inspired the author to modify and publish a practical version of the research for a greater international audience. Therefore, the content of this book is intended for a double audience, on the one hand for those interested in the organisational and management aspects of maintenance.
标签： Maintenance Electricity Risk-Based Network for
上传时间： 2020-06-07
上传用户：shancjb
We are very pleased to introduce the proceedings of the First EAI International Conference on Smart Grid Inspired Future Technologies (SmartGIFT 2016). This was the first SmartGIFT conference, aiming to create a forum for researches, developers, and practitioners from both academia and industry to publish their key results and to disseminate state-of-the-art concepts and techniques in all aspects of smart grids. The 37 scientific participants had many fruitful discussions and exchanges that contributed to the success of the conference. Participants from 12 countries made the conference truly international in scope.
标签： Technologies Inspired Future Smart Grid
上传时间： 2020-06-07
上传用户：shancjb
The term “ smart grid ” defi nes a self - healing network equipped with dynamic optimiza- tion techniques that use real - time measurements to minimize network losses, maintain voltage levels, increase reliability, and improve asset management. The operational data collected by the smart grid and its sub - systems will allow system operators to rapidly identify the best strategy to secure against attacks, vulnerability, and so on, caused by various contingencies. However, the smart grid fi rst depends upon identifying and researching key performance measures, designing and testing appropriate tools, and developing the proper education curriculum to equip current and future personnel with the knowledge and skills for deployment of this highly advanced system.
上传时间： 2020-06-07
上传用户：shancjb
In order to enhance the efficiency and reliability of the power grid, diversify energy resources, improve power security, and reduce greenhouse gas emission, many countries have been putting great efforts in designing and constructing their smart grid(SG) infrastructures.Smart gridcommunicationsnetwork(SGCN) is oneof the key enabling technologies of the SG. However, a successful implementation of an efficient and cost-effective SGCN is a challenging task
上传时间： 2020-06-07
上传用户：shancjb
One of the predominant topics in the domain of the emerging Smart Grid can be seen in standardization. With the combination of existing protection and automa- tion technology with upcoming ICT-based solutions, different interoperability is- sues arise when technologies have to be combined in the infrastructure. Standards have proven to be one of the most striking solutions to actually cope with this topic. Since 2008, this topic has gained much attention in various political and technical agendas.
标签： Standardization Smart Grids in
上传时间： 2020-06-07
上传用户：shancjb
基于TMS320F2812 光伏并网发电模拟装置PROTEL设计原理图+PCB+软件源码+WORD论文文档,硬件采用2层板设计，PROTEL99SE 设计的工程文件，包括完整的原理图和PCB文件，可以做为你的学习设计参考。 摘要：本文实现了一个基于TMS320F2812 DSP芯片的光伏并网发电模拟装置，采用直流稳压源和滑动变阻器来模拟光伏电池。通过TMS320F2812 DSP芯片ADC模块实时采样模拟电网电压的正弦参考信号、光伏电池输出电压、负载电压电流反馈信号等。经过数据处理后，用PWM模块产生实时的SPWM 波，控制MOSFET逆变全桥输出正弦波。本文用PI控制算法实现了输出信号对给定模拟电网电压的正弦参考信号的频率和相位跟踪，用恒定电压法实现了光伏电池最大功率点跟踪（MPPT），从而达到模拟并网的效果。另外本装置还实现了光伏电池输出欠压、负载过流保护功能以及光伏电池输出欠压、过流保护自恢复功能、声光报警功能、孤岛效应的检测、保护与自恢复功能。系统测试结果表明本设计完全满定设计要求。关键词：光伏并网，MPPT，DSP Photovoltaic Grid-connected generation simulator Zhangyuxin，Tantiancheng，Xiewuyang(College of Electrical Engineering, Chongqing University)Abstract: This paper presents a photovoltaic grid-connected generation simulator which is based on TMS320F2812 DSP, with a DC voltage source and a variable resistor to simulate the characteristic of photovoltaic cells. We use the internal AD converter to real-time sampling the referenced grid voltage signal, outputting voltage of photovoltaic, feedback outputting voltage and current signal. The PWM module generates SVPWM according to the calculation of the real-time sampling data, to control the full MOSFET inverter bridge output sine wave. We realized that the output voltage of the simulator can track the frequency and phase of the referenced grid voltage with PI regulation, and the maximum photovoltaic power tracking with constant voltage regulation, thereby achieved the purpose of grid-connected simulation. Additionally, this device has the over-voltage and over-current protection, audible and visual alarm, islanding detecting and protection, and it can recover automatically. The testing shows that our design is feasible.Keywords: Photovoltaic Grid-connected，MPPT，DSP 目录引言 11. 方案论证 11.1. 总体介绍 11.2. 光伏电池模拟装置 11.3. DC-AC逆变桥 11.4. MOSFET驱动电路方案 21.5. 逆变电路的变频控制方案 22. 理论分析与计算 22.1. SPWM产生 22.1.1. 规则采样法 22.1.2. SPWM 脉冲的计算公式 32.1.3. SPWM 脉冲计算公式中的参数计算 32.1.4. TMS320F2812 DSP控制器的事件管理单元 42.1.5. 软件设计方法 62.2. MPPT的控制方法与参数计算 72.3. 同频、同相的控制方法和参数计算 8
标签： tms320f2812 光伏 并网发电 模拟 protel pcb
上传时间： 2021-11-02
上传用户：
该文档为A Dynamic Feedback-based Load BalancingMethodology简介资料，讲解的还不错，感兴趣的可以下载看看…………………………
标签： 负载均衡
上传时间： 2021-11-05
上传用户：
fpga based jpge 压缩算法，性能不错
上传时间： 2022-06-24
上传用户：
便携式B型超声诊断仪具有无创伤、简便易行、相对价廉等优势，在临床中越来越得到广泛的应用。它将超声波技术、微电子技术、计算机技术、机械设计与制造及生物医学工程等技术融合在一起。开展该课题的研究对提高临床诊断能力和促进我国医疗事业的发展具有重要的意义。 便携式B型超声诊断仪由人机交互系统、探头、成像系统、显示系统构成。其基本工作过程是：首先人机交互系统接收到用户通过键盘或鼠标发出的命令，然后成像系统根据命令控制探头发射超声波，并对回波信号处理、合成图像，最后通过显示系统完成图像的显示。 成像系统作为便携式B型超声诊断仪的核心对图像质量有决定性影响，但以前研制的便携式B型超声诊断仪的成像系统在三个方面存在不足：第一、采用的是单片机控制步进电机，控制精度不高，导致成像系统采样不精确；第二、采用的数字扫描变换算法太粗糙，影响超声图像的分辨率；第三、它的CPU多采用的是51系列单片机，测量速度太慢，同时也不便于系统升级和扩展。 针对以上不足，提出了基于FPGA的B型超声成像系统解决方案，采用Altera公司的EP2C5Q208C8芯片实现了步进电机步距角的细分，使电机旋转更匀速，提高了采样精度；提出并采用DSTI-ULA算法（Uniform Ladder Algorithm based on Double Sample and Trilinear Interotation）在FPGA内实现数字扫描变换，提高了图像分辨率；人机交互系统采用S3C2410-AL作为CPU，改善了测量速度和系统的扩展性。 通过对系统硬件电路的设计、制作，软件的编写、调试，结果表明，本文所设计的便携式B型超声成像系统图像分辨率高、测量速度快、体积小、操作方便。本文所设计的便携式B型超声诊断仪可在野外作业和抢险（诸如地震、抗洪）中发挥作用，同时也可在乡村诊所中完成对相关疾病的诊断工作。
上传时间： 2013-05-18
上传用户：helmos
H.264/AVC是国际电信联盟与国际标准化组织/国际电工委员会联合推出的活动图像编码标准，简称H.264。作为最新的国际视频编码标准，H.264/AVC与MPEG-4、H.263等视频编码标准相比，性能有了很大的提高，并已在流媒体、数字电视、电话会议、视频存储等诸多领域得到广泛的应用。 本论文的研究课题是基于H.264/AVC视频编码标准的CAVLC(Context-based Adaptive Variable Length Coding，基于上下文的自适应可变长编码)编码算法研究及FPGA实现。对于变换后的熵编码，H.264/AVC支持两种编码模式：基于上下文的可变长编码(CAVLC)和基于上下文的自适应算术编码(CABAC，Context-based Adaptive BinaryArithmetic Coding)。在H.264/AVC中，尽管CAVLC算法也是采用了VLC编码，但是同以往标准不同，它所有的编码都是基于上下文进行。这种方法比传统的查单一表的方法提高了编码效率，但也增加了设计上的困难。 作者在全面学习H.264/AVC协议和深入研究CAVLC编码算法的基础上，确定了并行编码的CAVLC编码器结构框图，并总结出了影响CAVLC编码器实现的瓶颈。针对这些瓶颈，对CAVLC编码器中的各个功能模块进行了优化设计，这些优化设计包括多参考块的表格预测法、快速查找表法、算术消除法等。最后，用Verilog硬件描述语言对所设计的CAVLC编码器进行了描述，用EDA软件对其主要功能模块进行了仿真，并在Cyclone II系列EP2C20F484的FPGA上验证了它们的功能。结果表明，该CAVLC编码器各编码单元的编码速度得到了显著提高且均能满足实时通信要求，为整个CAVLC编码器的实时通信提供了良好的基础。
上传时间： 2013-06-22
上传用户：diamondsGQ
