高通(Qualcomm)蓝牙芯片QCC5151_硬件设计详细指导书（官方内部培训手册）共52页其内容是针对硬件设计、部分重要元器件选择(ESD，Filter）及走线注意事项的详细说明。2 Power management 2.1 SMPS 2.1.1 Components specification 2.1.2 Input power supply selection 2.1.3 Minimize SMPS EMI emissions 2.1.4 Internal LDOs and digital core decoupling 2.1.5 Powering external components 2.2 Charger 2.2.1 Charger connections.2.2.2 general charger operation2.2.3 Temperature measurement during charging 2.3 SYS_CTRL 3 Bluetooth radio3.1 RF PSU component choice 3.2 RF band-pass filter3.3 Layout (天线 走线的注意事项)4 Audio4.1 Audio bypass capacitors 4.2 Earphone speaker output4.3 Line/Mic input 4.4 Headphone output optimizition5 LED pads 5.1 LED driver 5.2 Digital/Button input 5.3 Analog input5.4 Disabled 6 Reset pin (Reset#)7 QSPIinterface 8 USB interfaces 8.1 USB device port8.1.1 USB connections8.1.2 Layout notes8.1.3 USB charger detection
上传时间： 2022-01-24
上传用户：XuVshu
一种通用微型飞行控制器设计 105页摘 要 微小型无人机(Micro／Mini UnmannedAerial Vehicle，M【，AV)在现代军事和国民经济中发 挥着越来越重要的作用。飞行控制器是无人机系统的核心，它自动采集无人机的各种飞行参数， 输出舵面／油门指令以控制无人机的姿态和轨迹，使无人机能在没有人工操纵干预的情况下自主 飞行，完成预定的任务。因此，研制高性能的飞行控制器对改善无人机的飞行性能以及提高任 务完成效率都具有重要的意义。 本文着重研究一种通用微型飞行控制器(general Micro Flight Controller，GMFC)，以适用 于小型／微型固定翼飞行器、旋翼飞行器、飞艇以及移动机器人的控制。论文的主要工作涉及 GMFC的硬件设计与软件实现，具体内容包括： 1)分析了微型飞行控制器在国内外的研究现状和发展趋势，根据任务需求和设计指标确定 一种通用型、微型化、低功耗、高性能、低成本的嵌入式微型飞行控制器的整体方案。 2)设计了基于ARM的通用微型飞行控制器的硬件系统，包括主控模块、惯性测量单元、 静压高度计、遥控信号接收单元、数据通信模块、电源模块、附加传感器模块等；完成了整个 控制器的PCB制作以及对所有电路的调试工作，使得系统运作正常。 3)研究了基于卡尔曼滤波算法的姿态参考系统，并对姿态参考系统的静态性能和动态性能 进行测试。 4)设计了小型四旋翼飞行器本体平台并对其进行动力学建模仿真； 5)在此基础上，结合四旋翼飞行器试验平台设计了飞行控制律，开发了GMFC的软件系 统，并开展物理实验验证。
标签： 飞行控制器
上传时间： 2022-03-15
上传用户：zhaiyawei
首先下载软件，解压软件，安装在程序中找到SEGGER,选里面的J-FLASH，进入界面，刚开始的那个界面可以忽略，不用建project也可以；单击菜单栏的“Options---Project settings”打开设置，进行jlink配置;正在general选项，选择“USB”，一般都是默认配置，确认一下即可;然后在CPU选项，选择芯片型号，先选择“Device”才能选择芯片型号，芯片型号，要根据你使用的芯片进行选择;在Target interface选项 里面选择SWD模式;首先Target里面选“Connection”连接目标芯片，然后 Target--Auto进行程序烧写;首先Target里面选择“Connection”连接目标芯片，然后 Target--Auto进行程序烧写.SEGGER J-Links are the most widely used line of debug probes available today. They've proven their value for more than 10 years in embedded development. This popularity stems from the unparalleled performance, extensive feature set, large number of supported CPUs, and compatibility with all popular development environments.
标签： JLINK
上传时间： 2022-03-22
上传用户：
高通(Qualcomm)蓝牙芯片QCC5144_硬件设计详细指导书（官方内部培训手册）其内容是针对硬件设计、部分重要元器件选择(ESD，Filter）及走线注意事项的详细说明。2 Power management 2.1 SMPS 2.1.1 Components specification 2.1.2 Input power supply selection 92.1.3 Minimize SMPS EMI emissions 2.1.4 Internal LDOs and digital core decoupling 2.1.5 Powering external components 2.2 Charger 2.2.1 Charger connections.2.2.2 general charger operation2.2.3 Temperature measurement during charging 2.3 SYS_CTRL 3 Bluetooth radio3.1 RF PSU component choice 3.2 RF band-pass filter3.3 Layout (天线 走线的注意事项)4 Audio4.1 Audio bypass capacitors 4.2 Earphone speaker output4.3 Line/Mic input 4.4 Headphone output optimizition5 LED pads 5.1 LED driver 5.2 Digital/Button input 5.3 Analog input5.4 Disabled 6 Reset pin (Reset#)7 USB interfaces7.1 USB device port7.1.1 USB device port7.1.2 Layout notes 7.1.3 USB charger detectionA QCC5144 VFBGA example schematic and BOM B Recommended SMPS components specificationB.1 Inductor specifition B.2 Recommended inductors B.3 SMPS capacitor specifition
上传时间： 2022-04-07
上传用户：默默
为了实时检测血氧量,能使缺氧特别敏感的脑组织或心脏类疾病患者得到及时治疗,采用近红外双波长透射式光电脉搏血氧测定法,以H桥电路对发射光源进行控制及通用运算放大器搭建滤波电路。运用参数理论计算和计算机仿真结果相对比的方法,通过Mu ltisim软件对所设计电路进行仿真,仿真结果与理论参数计算相吻合,证明了电路参数设计的可行性,为血氧仪的实物制作提供参考。For real-time detection of oxygen saturation for timely treatment of the brain or heart,which are very sensitive to oxygen inadequacy,the near-infrared wavelengths double photoelectric pulse oximeter transmission method is adopted.The illuminant is controlled with the H bridge circuit and the filter circuit is built with general op-amps.Parameters by theoretical calculation is compared with the computer simulation results in Multisim and satisfactory results are obtained.It is shown that the design of the circuit parameters is feasible and can be a help in making the physical blood-oxygen monitor.
上传时间： 2022-05-12
上传用户：
MT2625 DatasheetVersion: 1.2Release date: 31 January 2018NB-IoT transceiver• Compliant with 3GPP R13/R14 NB-IoT standard• Supports DL 200kHz bandwidth/UL single tone and multi-tone• Supported RF bands: B1/B2/B3/B5/B8/B11/B12/B13/B17/B18/B19/B20/B21/B25/B26/B28/B31/B66/B70/B71• Supports PSM and eDRX modeMicrocontroller subsystem• ARM® Cortex®-M4 with FPU and MPU• 14 DMA channels• One RTC timer, one 64-bit and five 32-bit general purpose timers• Development support: SWD, JTAG• Crypto engineo AES 128, 192, 256 bitso DES, 3DESo MD5, SHA-1, 224, 256, 384, 512• True random number generator• JTAG password protection
标签： MT2625
上传时间： 2022-07-04
上传用户：
1. general Description BL-M3362NS1 product is designed base on Broadcom BCM43362 chipset. It operates at 2.4GHz band and supports IEEE802.11b/g/n 1T1Rwith wireless data rate up to 72.2Mbps. It supports IEEE802.11isafety protocol, along with IEEE802.11e standard service quality. It supports standard interfaces SDIOV2.0(50 MHz,4-bit and1-bit) and generic SPI(up to 50 MHz), Integrated ARM Cortex?-M3 CPUwith on-chip memory enables running IEEE802.11 firmware that can be field-upgraded with future features.2. The range of applying Imaging platforms(printers, digital still cameras, digital picture frames)Consumer electronic devices(DTV, DVDplayers, Blu-ray players. etc.)Gaming platforms Carinformation MiFi/Mobile Routes Smart PAD Set-TopBoxes
标签： wifi
上传时间： 2022-07-04
上传用户：
简单介绍了OBD的通用的接口定义和常见的几种用法的接口定义，①电平 （差分信号）有信号CANH=3.5V，CANL=1.5V， 没有信号CANH=2.5V,CANL=2.5V ②速率：CAN系统又分为高速和低速，高速CAN系统采用硬线是动力型，速度：500kbps，控制ECU、ABS等；低速CAN是舒适型，速度：125Kbps，主要控制仪表、防盗等。 ③协议程序CAN协议程序 （二）J1850 ①电平 H：4.25V~20V L：低于3.5V ②速率 速率：20kbps~125kbps （定：美）用于福特(Ford)、通用汽车(general Moter；GM)、克赖斯勒(Chrysler)等 ③协议程序（三）ISO 9141-2高电平：8*80% 低电平：8*20%
标签： obd接口
上传时间： 2022-07-20
上传用户：
The GD32F103xx device is a 32-bit general-purpose microcontroller based on the ARM?Cortex?-M3 RISC core with best ratio in terms of processing power, reduced power consumption and peripheral set. The Cortex?-M3 is a next generation processor core whichis tightly coupled with a Nested Vectored Interrupt Controller (NVIC), SysTick timer and advanced debug support.The GD32F103xx device incorporates the ARM ' Cortex?-M3 32-bit processor core operating at 108 MHz frequency with Flash accesses zero wait states to obtain maximumefficiency. It provides up to 3 MB on-chip Flash memory and up to 96 KB SRAM memory. An extensive range of enhanced I/Os and peripherals connected to two APB buses. The devices offer up to three 12-bit ADCs, up to two 12-bit DACs, up to ten general-purpose
标签： gd32f103
上传时间： 2022-07-23
上传用户：aben
