本文设计出一种新型灯光调光控制系统。系统采用先进的智能功率模块((IPM)取代以往的可控硅作为功率变换器件,以Intel16 位单片机为核心控制器采用AC-DC-AC 变换技术使输出的波形较可控硅斩波后的波形有很大的改善,这不仅降低了变压器的损耗而且延长了灯的寿命,提高了系统的运行质量。现场总线CAN 的运用使得整个系统便于集中监控、管理。调光器是机场助航灯光系统的核心控制设备。目前,国内外使用的调光器主要采用可控硅斩波技术,这种调光器存在波形畸变大、电网要求高、对电网污染严重、效率低、负载适应能力差等缺点。针对以往系统存在的不足,提出了正弦波调光器,它采用逆变技术,输出标准正弦电压,它的优点是对负载适应能力强、对电网要求低、污染轻、效率高、输出波形好等。正弦波调光器采用逆变技术,输出幅度可调的标准正弦电压,通过控制算法实现对灯光回路的高精度恒流控制。“正弦波调光器”将极大地提高调光器的技术水平,改善调光器的性能,增强市场竞争能力。
上传时间： 2013-11-02
上传用户：亚亚娟娟123
摘要：本水位监测报警器使用5V低压直流电源（也可以用3节5号电池代替）就可以对5~15厘米的水位进行监测，用LED显示和数码管显示水位，并可以对不再此范围内的水位发出报警。主要采用CD4066、74LS86、74LS32、CD4511芯片，再加上数码管、蜂鸣器、发光二极管、电阻这些器件组成一个简单而灵敏的监测报警电路，操作简单，接通电源即可工作。因为大部分电路采用数字电路，所以本水位监测报警器还具有耗能低、准确性高的特点。关键字：译码电路 报警电路 监测电路 Abstract: The water level alarm monitoring the use of 5 V low-voltage DC power (can also use three batteries replaced on the 5th) will be able to 5 to 15 centimeters of water level monitoring, with LED display and digital display of water level, and this can no longer Within the scope of a water level alarm. Mainly CD4066, 74LS86, 74LS32, CD4511 chips, coupled with digital control, buzzer, light-emitting diode, the resistance of these devices composed of a simple and sensitive monitoring alarm circuits. Because the majority of circuits using digital circuitry, so the water level monitored alarm system also has low energy consumption, high accuracy of the characteristics. Keyword: Decoding circuit alarm circuit monitoring circuit
上传时间： 2013-11-05
上传用户：王庆才
PIC系列单片机手册 第1 章 简介 1-1简介 ................................................................................................................................................................. 1-2本手册的宗旨 ................................................................................................................................................... 1-3器件结构 .......................................................................................................................................................... 1-4开发支持 .......................................................................................................................................................... 1-6器件种类 .......................................................................................................................................................... 1-7格式和符号的约定 ......................................................................................................................................... 1-12相关文档 ........................................................................................................................................................ 1-14相关应用笔记 ................................................................................................................................................. 1-17版本历史 ........................................................................................................................................................ 1-18第2 章 振荡器 2-1简介 ................................................................................................................................................................. 2-2振荡器配置 ...................................................................................................................................................... 2-2晶体振荡器 / 陶瓷谐振器 ................................................................................................................................. 2-4外部RC 振荡器 ............................................................................................................................................. 2-124MHz 内部 RC 振荡器 ................................................................................................................................... 2-13休眠模式对片内振荡器的影响 ........................................................................................................................ 2-17器件复位对片内振荡器的影响 ........................................................................................................................ 2-17设计技巧 ........................................................................................................................................................ 2-18相关应用笔记 ................................................................................................................................................. 2-19版本历史 ........................................................................................................................................................ 2-20第3 章 复位 3-1简介 ................................................................................................................................................................. 3-2上电复位、上电延时定时器、 起振定时器、欠压复位和奇偶校验错误复位 ...................................................... 3-4寄存器和状态位的值 ...................................................................................................................................... 3-10设计技巧 ........................................................................................................................................................ 3-16相关应用笔记 ................................................................................................................................................. 3-17版本历史 ........................................................................................................................................................ 3-18 第4 章 架构 4-1简介 ................................................................................................................................................................. 4-2时序图/ 指令周期 ............................................................................................................................................ 4-5指令流/ 流水线 ................................................................................................................................................ 4-6I/O 端口描述 .................................................................................................................................................... 4-7设计技巧 ........................................................................................................................................................ 4-12相关应用笔记 ................................................................................................................................................. 4-13版本历史 ........................................................................................................................................................ 4-14 第5 章 CPU 和ALU 5-1简介 ................................................................................................................................................................. 5-2指令的一般格式 ............................................................................................................................................... 5-4中央处理单元（CPU） .................................................................................................................................... 5-4指令时钟 .......................................................................................................................................................... 5-4算术逻辑单元（ALU） .................................................................................................................................... 5-5状态寄存器 ...................................................................................................................................................... 5-6OPTION_REG 寄存器 ..................................................................................................................................... 5-8电源控制寄存器 ............................................................................................................................................... 5-9设计技巧 ........................................................................................................................................................ 5-10相关应用笔记 ................................................................................................................................................. 5-11版本历史 ........................................................................................................................................................ 5-12第6 章 存储器构成 6-1简介 ................................................................................................................................................................. 6-2程序存储器构成 ............................................................................................................................................... 6-2数据存储器构成 ............................................................................................................................................... 6-8初始化 ........................................................................................................................................................... 6-14设计技巧 ........................................................................................................................................................ 6-16相关应用笔记 ................................................................................................................................................. 6-17版本历史 ........................................................................................................................................................ 6-18第7 章 数据EEPROM 7-1简介 ................................................................................................................................................................. 7-2控制寄存器 ...................................................................................................................................................... 7-3EEADR ............................................................................................................................................................ 7-4EECON1 和EECON2 寄存器 .......................................................................................................................... 7-4从EEPROM 数据存储器中读数据 .................................................................................................................... 7-5向EEPROM 数据存储器中写数据 .................................................................................................................... 7-5写校验 ............................................................................................................................................................. 7-6误写操作保护 ................................................................................................................................................... 7-7代码保护配置下的数据EEPROM 操作 ............................................................................................................. 7-7初始化 ............................................................................................................................................................. 7-7设计技巧 .......................................................................................................................................................... 7-8相关应用笔记 ................................................................................................................................................... 7-9版本历史 ........................................................................................................................................................ 7-10第8 章 中断 8-1简介 ................................................................................................................................................................. 8-2控制寄存器 ...................................................................................................................................................... 8-5中断响应延时 ................................................................................................................................................. 8-10INT 和外部中断 .............................................................................................................................................. 8-10中断的现场保护 ............................................................................................................................................. 8-11初始化 ........................................................................................................................................................... 8-14设计技巧 ........................................................................................................................................................ 8-16相关应用笔记 ................................................................................................................................................. 8-17版本历史 ........................................................................................................................................................ 8-18第9 章 I/O 端口 9-1简介 ................................................................................................................................................................. 9-2PORTA 和TRISA 寄存器 ................................................................................................................................ 9-4PORTB 和TRISB 寄存器 ................................................................................................................................ 9-6PORTC 和TRISC 寄存器 ................................................................................................................................ 9-8PORTD 和TRISD 寄存器 ................................................................................................................................ 9-9PORTE 和TRISE 寄存器 ............................................................................................................................... 9-10PORTF 和 TRISF 寄存器 ............................................................................................................................... 9-11PORTG 和TRISG 寄存器 .............................................................................................................................. 9-12GPIO 和TRISGP 寄存器 ............................................................................................................................... 9-13I/O 编程注意事项 ........................................................................................................................................... 9-14初始化 ........................................................................................................................................................... 9-16设计技巧 ........................................................................................................................................................ 9-17相关应用笔记 ................................................................................................................................................. 9-19版本历史 ........................................................................................................................................................ 9-20第10 章 并行从动端口 10-1简介 ............................................................................................................................................................... 10-2控制寄存器 .................................................................................................................................................... 10-3操作 ............................................................................................................................................................... 10-4休眠模式下的操作 ......................................................................................................................................... 10-5复位的影响 .................................................................................................................................................... 10-5PSP 波形 ....................................................................................................................................................... 10-5设计技巧 ........................................................................................................................................................ 10-6相关应用笔记 ................................................................................................................................................. 10-7版本历史 ........................................................................................................................................................ 10-8 第11 章 TIMER0 11-1简介 ............................................................................................................................................................... 11-2控制寄存器 .................................................................................................................................................... 11-3操作 ............................................................................................................................................................... 11-4TMR0 中断 .................................................................................................................................................... 11-5Timer0 外部时钟的使用 ................................................................................................................................. 11-6TMR0 的预分频器 ......................................................................................................................................... 11-7设计技巧 ...................................................................................................................................................... 11-10相关应用笔记 ............................................................................................................................................... 11-11版本历史 ...................................................................................................................................................... 11-12第12 章 TIMER1 12-1简介 ............................................................................................................................................................... 12-2控制寄存器 .................................................................................................................................................... 12-3Timer1 工作在定时器模式 ..............................................................................................................................12-4Timer1 工作在同步计数器模式 ....................................................................................................................... 12-4Timer1 工作在异步计数器模式 ....................................................................................................................... 12-5Timer1 振荡器 ............................................................................................................................................... 12-7休眠操作 ........................................................................................................................................................ 12-9用CCP 触发器的输出将Timer1 复位 ............................................................................................................. 12-9Timer1 寄存器（TMR1H:TMR1L）的复位 .................................................................................................... 12-9Timer1 预分频器 ............................................................................................................................................ 12-9初始化 ......................................................................................................................................................... 12-10设计技巧 ...................................................................................................................................................... 12-12相关应用笔记 ............................................................................................................................................... 12-13版本历史 ...................................................................................................................................................... 12-14第13 章 TIMER2 13-1简介 ............................................................................................................................................................... 13-2控制寄存器 .................................................................................................................................................... 13-3定时器时钟源 ................................................................................................................................................. 13-4定时器TMR2 和PR2 周期寄存器 .................................................................................................................. 13-4TMR2 匹配输出 ............................................................................................................................................. 13-4将Timer2 的预分频器和后分频器清零 ........................................................................................................... 13-4休眠操作 ........................................................................................................................................................ 13-4初始化 ........................................................................................................................................................... 13-5设计技巧 ........................................................................................................................................................ 13-6相关应用笔记 ................................................................................................................................................. 13-7版本历史 ........................................................................................................................................................ 13-8第14 章 比较/ 捕捉/ 脉宽调制(CCP) 14-1简介 ............................................................................................................................................................... 14-2控制寄存器 .................................................................................................................................................... 14-3捕捉模式 ........................................................................................................................................................ 14-4比较模式 ........................................................................................................................................................ 14-6PWM 模式 ..................................................................................................................................................... 14-8初始化 ......................................................................................................................................................... 14-12设计技巧 ...................................................................................................................................................... 14-15相关应用笔记 ............................................................................................................................................... 14-17版本历史 ...................................................................................................................................................... 14-18第15 章 同步串行口（SSP） 15-1简介 ............................................................................................................................................................... 15-2控制寄存器 .................................................................................................................................................... 15-3SPITM 模式 .................................................................................................................................................... 15-6SSP 模块的I2CTM 操作 ............................................................................................................................... 15-16初始化 ......................................................................................................................................................... 15-26设计技巧 ...................................................................................................................................................... 15-28相关应用笔记 ............................................................................................................................................... 15-29版本历史 ...................................................................................................................................................... 15-30第16 章 基本同步串行口（BSSP） 16-1简介 ............................................................................................................................................................... 16-2控制寄存器 .................................................................................................................................................... 16-3SPITM 模式 .................................................................................................................................................... 16-6SSP 模块 的I2CTM 操作 ............................................................................................................................... 16-15初始化 ......................................................................................................................................................... 16-23设计技巧 ...................................................................................................................................................... 16-24相关应用笔记 ............................................................................................................................................... 16-25版本历史 ...................................................................................................................................................... 16-26第17 章 主同步串行口（MSSP） 17-1简介 ............................................................................................................................................................... 17-2控制寄存器 .................................................................................................................................................... 17-4SPITM 模式 .................................................................................................................................................... 17-9SSP 模块的 I2C™ 操作 ............................................................................................................................... 17-18I2CTM 总线的连接注意事项 ........................................................................................................................... 17-56初始化 ......................................................................................................................................................... 17-57设计技巧 ...................................................................................................................................................... 17-58相关应用笔记 ............................................................................................................................................... 17-59版本历史 ...................................................................................................................................................... 17-60第18 章 USART 18-1简介 ............................................................................................................................................................... 18-2控制寄存器 .................................................................................................................................................... 18-3USART 波特率发生器（BRG） ..................................................................................................................... 18-5USART 异步工作模式 ................................................................................................................................... 18-8USART 同步主控模式 .................................................................................................................................. 18-15USART 同步从动模式 ................................................................................................................................. 18-19初始化 ......................................................................................................................................................... 18-21设计技巧 ...................................................................................................................................................... 18-22相关应用笔记 ............................................................................................................................................... 18-23版本历史 ...................................................................................................................................................... 18-24第19 章 参考电压模块 19-1简介 ............................................................................................................................................................... 19-2控制寄存器 .................................................................................................................................................... 19-3配置参考电压 ................................................................................................................................................. 19-4参考电压精度 ................................................................................................................................................. 19-5休眠模式下的操作 ......................................................................................................................................... 19-5复位的影响 .................................................................................................................................................... 19-5连接注意事项 ................................................................................................................................................. 19-6初始化 ........................................................................................................................................................... 19-7设计技巧 ........................................................................................................................................................ 19-8相关应用笔记 ................................................................................................................................................. 19-9版本历史 ...................................................................................................................................................... 19-10第20 章 比较器 20-1简介 ............................................................................................................................................................... 20-2控制寄存器 .................................................................................................................................................... 20-3设置比较器模式 ............................................................................................................................................. 20-4比较器工作原理 ............................................................................................................................................. 20-6比较器参考源 ................................................................................................................................................. 20-6比较器的响应时间 ......................................................................................................................................... 20-8比较器输出 .................................................................................................................................................... 20-8比较器中断 .................................................................................................................................................... 20-9休眠状态下比较器的操作 ............................................................................................................................... 20-9复位的影响 .................................................................................................................................................... 20-9模拟输入连接方式注意事项 .......................................................................................................................... 20-10初始化 ......................................................................................................................................................... 20-11设计技巧 ...................................................................................................................................................... 20-12相关应用笔记 ............................................................................................................................................... 20-13版本历史 ...................................................................................................................................................... 20-14第21 章 8 位A/D 转换器 21-1简介 ............................................................................................................................................................... 21-2控制寄存器 .................................................................................................................................................... 21-3操作 ............................................................................................................................................................... 21-5A/D 采集时间要求 .......................................................................................................................................... 21-6A/D 转换时钟的选择 ...................................................................................................................................... 21-8配置模拟输入端口 ......................................................................................................................................... 21-9A/D 转换 ...................................................................................................................................................... 21-10休眠期间的A/D 转换 ................................................................................................................................... 21-12A/D 精度/ 误差 ............................................................................................................................................ 21-13复位对A/D 转换的影响 ................................................................................................................................ 21-13CCP 触发器的使用 ...................................................................................................................................... 21-14连接注意事项 ............................................................................................................................................... 21-14传递函数 ...................................................................................................................................................... 21-14初始化 ......................................................................................................................................................... 21-15设计技巧 ...................................................................................................................................................... 21-16相关应用笔记 ............................................................................................................................................... 21-17版本历史 ...................................................................................................................................................... 21-18第22 章 基本型8 位A/D 转换器 22-1简介 ............................................................................................................................................................... 22-2控制寄存器 .................................................................................................................................................... 22-3A/D 采集时间要求 .......................................................................................................................................... 22-6A/D 转换时钟的选择 ...................................................................................................................................... 22-8配置模拟输入端口 ....................................................................................................................................... 22-10A/D 转换 ...................................................................................................................................................... 22-11休眠期间的A/D 转换 ................................................................................................................................... 22-14A/D 转换精度/ 误差 ..................................................................................................................................... 22-15复位对A/D 转换的影响 ................................................................................................................................ 22-16连接时的考虑事项 ....................................................................................................................................... 22-16传递函数 ...................................................................................................................................................... 22-16初始化 ......................................................................................................................................................... 22-17设计技巧 ...................................................................................................................................................... 22-18相关应用笔记 ............................................................................................................................................... 22-19版本历史 ...................................................................................................................................................... 22-20第23 章 10 位A/D 转换器 23-1简介 ............................................................................................................................................................... 23-2控制寄存器 .................................................................................................................................................... 23-3操作 ............................................................................................................................................................... 23-5A/D 采集时间要求 .......................................................................................................................................... 23-6A/D 转换时钟的选择 ...................................................................................................................................... 23-8模拟输入引脚的设置 ...................................................................................................................................... 23-9A/D 转换的编程举例 .................................................................................................................................... 23-10休眠期间的A/D 转换 ................................................................................................................................... 23-14复位对A/D 转换的影响 ................................................................................................................................ 23-14A/D 转换精度与误差 .................................................................................................................................... 23-15连接时的考虑事项 ....................................................................................................................................... 23-16传递函数 ...................................................................................................................................................... 23-16初始化 ......................................................................................................................................................... 23-17设计技巧 ...................................................................................................................................................... 23-18相关应用笔记 ............................................................................................................................................... 23-19版本历史 ...................................................................................................................................................... 23-20第24 章 积分型A/D 转换器 24-1简介 ............................................................................................................................................................... 24-2控制寄存器 .................................................................................................................................................... 24-3转换过程 ........................................................................................................................................................ 24-6其它模拟模块 ............................................................................................................................................... 24-12校准参数 ...................................................................................................................................................... 24-13设计技巧 ...................................................................................................................................................... 24-14相关应用笔记 ............................................................................................................................................... 24-15版本历史 ...................................................................................................................................................... 24-16第25 章 LCD 25-1简介 ............................................................................................................................................................... 25-2控制寄存器 .................................................................................................................................................... 25-3LCD 定时 ....................................................................................................................................................... 25-6LCD 中断 ..................................................................................................................................................... 25-12像素控制 ...................................................................................................................................................... 25-13电压发生器 .................................................................................................................................................. 25-15休眠模式下的操作 ....................................................................................................................................... 25-16复位的影响 .................................................................................................................................................. 25-17LCD 模块的设置 .......................................................................................................................................... 25-17判别比 ......................................................................................................................................................... 25-18LCD 电压发生器 .......................................................................................................................................... 25-20对比度 ......................................................................................................................................................... 25-22LCD 玻璃基板 .............................................................................................................................................. 25-22初始化 ......................................................................................................................................................... 25-23设计技巧 ...................................................................................................................................................... 25-24相关应用笔记 ............................................................................................................................................... 25-25版本历史 ...................................................................................................................................................... 25-26第26 章 看门狗定时器与休眠模式 26-1简介 ............................................................................................................................................................... 26-2控制寄存器 .................................................................................................................................................... 26-3看门狗定时器（WDT）的操作 ....................................................................................................................... 26-4休眠省电模式 ................................................................................................................................................. 26-7初始化 ........................................................................................................................................................... 26-9设计技巧 ...................................................................................................................................................... 26-10相关应用笔记 ............................................................................................................................................... 26-11版本历史 ...................................................................................................................................................... 26-12第27 章 器件配置位 27-1简介 ............................................................................................................................................................... 27-2配置字位 ........................................................................................................................................................ 27-4编程校验/ 代码保护 ....................................................................................................................................... 27-8识别码ID 的位置 ........................................................................................................................................... 27-9设计技巧 ...................................................................................................................................................... 27-10相关应用笔记 ............................................................................................................................................... 27-11版本历史 ...................................................................................................................................................... 27-12第28 章 在线串行编程 28-1简介 ............................................................................................................................................................... 28-2进入在线串行编程模式 .................................................................................................................................. 28-3应用电路 ........................................................................................................................................................ 28-4编程器 ........................................................................................................................................................... 28-6编程环境 ........................................................................................................................................................ 28-6其它优点 ........................................................................................................................................................ 28-7PICmicro® OTP 型单片机的现场编程 ............................................................................................................. 28-8FLASH 型 PICmicro® 单片机的现场编程 ...................................................................................................... 28-10设计技巧 ...................................................................................................................................................... 28-12相关应用笔记 ............................................................................................................................................... 28-13版本历史 ...................................................................................................................................................... 28-14第29 章 指令集 29-1简介 ............................................................................................................................................................... 29-2指令格式 ........................................................................................................................................................ 29-4作为源/ 目标寄存器的特殊功能寄存器 ........................................................................................................... 29-6Q 周期操作 .................................................................................................................................................... 29-7指令描述 ........................................................................................................................................................ 29-8设计技巧 ...................................................................................................................................................... 29-45相关应用笔记 ............................................................................................................................................... 29-47版本历史 ...................................................................................................................................................... 29-48第30 章 电气规范 30-1简介 ............................................................................................................................................................... 30-2绝对最大值 .................................................................................................................................................... 30-3器件选型表 .................................................................................................................................................... 30-4器件电压规范 ................................................................................................................................................. 30-5器件电流特性 ................................................................................................................................................. 30-6输入阈值电平 ................................................................................................................................................. 30-9I/O 电流特性 ................................................................................................................................................ 30-10输出驱动电压 ............................................................................................................................................... 30-11I/O 引脚的容性负载 ..................................................................................................................................... 30-12数据EEPROM / 闪存 .................................................................................................................................. 30-13LCD ............................................................................................................................................................. 30-14比较器和参考电压 ....................................................................................................................................... 30-15时序参数符号 ............................................................................................................................................... 30-16外部时钟时序波形图和时序要求示例 ............................................................................................................ 30-17上电和复位时序波形图及要求示例 ............................................................................................................... 30-19定时器Timer0 和Timer1 时序波形图及要求示例 ......................................................................................... 30-20CCP 的时序图及要求 ................................................................................................................................... 30-21并行从动端口 (PSP) 时序图及要求 .............................................................................................................. 30-22SSP 和 MSSP SPITM 模式时序波形图及要求示例 ....................................................................................... 30-23SSP I2CTM 模式时序波形图及要求示例 ........................................................................................................ 30-27MSSP I2CTM 模式时序波形图及要求示例 ..................................................................................................... 30-30USART/SCI 时序波形图及要求示例 ............................................................................................................. 30-328 位 A/D 时序波形图及要求示例 ................................................................................................................... 30-3410 位A/D 时序波形图及要求示例 ................................................................................................................. 30-36积分型A/D 时序波形图及要求示例 ............................................................................................................... 30-38LCD 时序波形图及要求示例 ......................................................................................................................... 30-40相关应用笔记 ............................................................................................................................................... 30-41版本历史 ...................................................................................................................................................... 30-42第31 章 器件特性 31-1简介 ............................................................................................................................................................... 31-2特性和电气规范 ............................................................................................................................................. 31-2DC 和AC 特性图表 ....................................................................................................................................... 31-2版本历史 ...................................................................................................................................................... 31-22第32 章 开发工具 32-1简介 ............................................................................................................................................................... 32-2集成开发环境（IDE） ................................................................................................................................... 32-3MPLAB® 软件语言支持 ................................................................................................................................. 32-6MPLAB® SIM 软件模拟器 ............................................................................................................................... 32-8MPLAB® 硬件仿真器支持 ............................................................................................................................... 32-9MPLAB® 编程器支持 ................................................................................................................................... 32-10辅助工具 ...................................................................................................................................................... 32-11开发板 ......................................................................................................................................................... 32-12针对其它Microchip 产品的开发工具 ............................................................................................................ 32-14相关应用笔记 ............................................................................................................................................... 32-15版本历史 ...................................................................................................................................................... 32-16第33 章 代码开发 33-1版本历史 ........................................................................................................................................................ 33-2第34 章 附录 34-1I2CTM 概述...................................................................................................................................................... 34-2LCD 玻璃基板生产商.................................................................................................................................... 34-11改进的器件特性............................................................................................................................................ 34-13版本历史....................................................................................................................................................... 34-19第35 章 术语表 35-1版本历史 ...................................................................................................................................................... 35-14目录
上传时间： 2013-11-15
上传用户：nanshan
特点 最高輸入頻率 10KHz 显示范围0-9999（一段设定）0至999999累积量 计数速度 50/10000脈波/秒可选择 输入脈波具有预设刻度功能 累积量同步（批量）或非同步（批次）计数可选择 数位化指拨设定操作简易 计数暂时停止功能 1组报警功能 2:主要規格 脈波輸入型式: Jump-pin selectable current sourcing(NPN) or current sinking (PNP) 脉波触发电位: HI bias (CMOS) (VIH=7.5V, VIL=5.5V) LO bias (TTL) (VIH=3.7V, VIL=2.0V) 最高输入频率: <10KHz (up,down,up/down mode) 输出动作时间 : 0.1 to 99.9 second adjustable 输出复归方式: Manual(N) or automatic (R or C) can be modif 继电器容量: AC 250V-5A, DC 30V-7A 显示值范围: 0-9999（PV,SV） 0-999999(TV) 显示幕: Red high efficiency LEDs high 7.0mm (.276")(PV,SV) Red high efficiency LEDs high 9.2mm (.36")(TV) 参数设定方式: Touch switches 感应器电源: 12VDC +/-3%(<60mA) 记忆方式: Non-volatile E2PROM memory 绝缘耐压能力: 2KVac/1 min. (input/output/power) 1600Vdc (input/output) 使用环境条件: 0-50℃(20 to 90% RH non-condensed) 存放环境条件: 0-70℃(20 to 90% RH non-condensed) CE认证: EN 55022:1998/A1:2000 Class A EN 61000-3-2:2000 EN 61000-3-3:1995/A1:2001 EN 55024:1998/A1:2001
上传时间： 2013-10-24
上传用户：wvbxj
特点 显示值范围-199999至999999位數 最高輸入頻率 5KHz 90度相位差加減算具有提高解析度4倍功能 输入脈波具有预设刻度功能 定位基准值可任意設定 比較磁滯值可任意設定 数位化指拨设定操作简易 3组继电器输出功能 2:主要規格 脈波輸入型式: Jump-pin selectable current sourcing(NPN) or current sinking (PNP) 脉波触发电位: HI bias (CMOS) (VIH=7.5V, VIL=5.5V) LO bias (TTL) (VIH=3.7V, VIL=2.0V) 最高输入频率: <5KHz 定位置范围: -199999 to 999999 second adjustabl 比较磁滞范围: 0 to 9999 adjustable 继电器容量: AC 250V-5A, DC 30V-7A 显示值范围: -199999 to 999999 显示幕: Red high efficiency LEDs high 9.2mm (.36") 参数设定方式: Touch switches 感应器电源: 12VDC +/-3%(<60mA) 记忆方式: Non-volatile E2PROM memory 绝缘耐压能力: 2KVac/1 min. (input/output/power) 1600Vdc (input/output) 使用环境条件: 0-50℃(20 to 90% RH non-condensed) 存放环境条件: 0-70℃(20 to 90% RH non-condensed) CE认证: EN 55022:1998/A1:2000 Class A EN 61000-3-2:2000 EN 61000-3-3:1995/A1:2001 EN 55024:1998/A1:2001
上传时间： 2014-12-03
上传用户：xjz632
特点 精确度0.25%滿刻度 ±1位數 输入配线系统可任意选择 CT比可任意设定 具有异常电流值与异常次数记录保留功能 电流过高或过低检测可任意设定 报警继电器复归方式可任意設定 尺寸小,穩定性高 2.主要規格 辅助电源: AC110V&220V ±20%(50 or 60Hz) AC220V&440V ±20%(50 or 60Hz)(optional) 精确度: 0.25% F.S. ±1 digit 输入负载: <0.2VA (Current) 最大过载能力 : Current related input: 2 x rated continuous 10 x rated 30 sec. 25 x rated 3sec. 50 x rated 1 sec. 输入电流范围: AC0-5A (10-1000Hz) CT ratio : 1-2000 adjustable 启动延迟动作时间: 0-99.9 second adjustable 继电器延迟动作时间: 0-99.9 second adjustable 继电器复归方式: Manual (N) / latch(L) can be modified 继电器磁滞范围: 0-999 digit adjustable 继电器动作方向: HI /LO/GO/HL can be modified 继电器容量: AC 250V-5A, DC 30V-7A 过载显示: "doFL" 温度系数: 50ppm/℃ (0-50℃) 显示幕: Red high efficiency LEDs high 14.22mm(.56")(PV) Red high efficiency LEDs high 14.22mm(.276")(NO) 参数设定方式: Touch switches 记忆型式 : Non-volatile E2PROM memory 绝缘耐压能力: 2KVac/1 min. (input/output/power) 1600Vdc(input/output 使用环境条件 : 0-50℃(20 to 90% RH non-condensed) 存放环境条件: 0-70℃(20 to 90% RH non-condensed) CE认证: EN 55022:1998/A1:2000 Class A EN 61000-3-2:2000 EN 61000-3-3:1995/A1:2001 EN 55024:1998/A1:2001
上传时间： 2013-10-14
上传用户：wanghui2438
特点 最高輸入頻率 10KHz 计数速度 50/10000脈波/秒可选择 四种输入模式可选择(加算,減算,加減算,90度相位差加減算) 90度相位差加減算具有提高解析度4倍功能 输入脈波具有预设刻度功能 计数暂时停止功能 3组报警功能 15BIT类比输出功能 数位RS-485界面 2:主要規格 脈波輸入型式: Jump-pin selectable current sourcing(NPN) or current sinking (PNP) 脉波触发电位: HI bias (CMOS) (VIH=7.5V, VIL=5.5V) LO bias (TTL) (VIH=3.7V, VIL=2.0V) 最高输入频率: <10KHz (up,down,up/down mode) <3KHz (quadrature mode) 输出动作时间 : 0.1 to 99.9 second adjustable 输出复归方式: Manual(N) or automatic (R or C) can be modif 继电器容量: AC 250V-5A, DC 30V-7A 显示值范围: -199999 to 999999 类比输出解析度: 15 bit DAC 输出反应速度: < 1/f+10ms(0-90%) 输出负载能力: < 10mA for voltage mode < 10V for current mode <[(V+)-7.5V]/20mA for two-wire mode 输出之涟波: < 0.1% F.S. 通讯位址: "01"-"FF" 传输速度: 19200/9600/4800/2400 selective 通信协议: Modbus RTU mode 显示幕: Red high efficiency LEDs high 14.22mm (.56") 参数设定方式: Touch switches 感应器电源: 12VDC +/-3%(<60mA) 记忆方式: Non-volatile E2PROM memory 绝缘耐压能力: 2KVac/1 min. (input/output/power) 1600Vdc (input/output) 使用环境条件: 0-50℃(20 to 90% RH non-condensed) 存放环境条件: 0-70℃(20 to 90% RH non-condensed) CE认证: EN 55022:1998/A1:2000 Class A EN 61000-3-2:2000 EN 61000-3-3:1995/A1:2001 EN 55024:1998/A1:2001
上传时间： 2013-11-23
上传用户：redmoons
特点 最高輸入頻率 10KHz 计数速度 50/10000脈波/秒可选择 四种输入模式可选择(加算,減算,加減算,90度相位差加減算) 90度相位差加減算具有提高解析度4倍功能 输入脈波具有预设刻度功能 前置量设定功能(二段設定)可选择 数位化指拨设定操作简易 计数暂时停止功能 3组报警功能 2:主要規格 脈波輸入型式: Jump-pin selectable current sourcing(NPN) or current sinking (PNP) 脉波触发电位: HI bias (CMOS) (VIH=7.5V, VIL=5.5V) LO bias (TTL) (VIH=3.7V, VIL=2.0V) 最高输入频率: <10KHz (up,down,up/down mode) <5KHz (quadrature mode) 输出动作时间 : 0.1 to 99.9 second adjustable 输出复归方式: Manual(N) or automatic (R or C) can be modif 继电器容量: AC 250V-5A, DC 30V-7A 显示值范围: -199999 to 999999 显示幕: Red high efficiency LEDs high 9.2mm (.36") 参数设定方式: Touch switches 感应器电源: 12VDC +/-3%(<60mA) ( 感應器電源 ) 记忆方式: Non-volatile E2PROM memory 绝缘耐压能力: 2KVac/1 min. (input/output/power) 1600Vdc (input/output) 使用环境条件: 0-50℃(20 to 90% RH non-condensed) 存放环境条件: 0-70℃(20 to 90% RH non-condensed) CE认证: EN 55022:1998/A1:2000 Class A EN 61000-3-2:2000 EN 61000-3-3:1995/A1:2001 EN 55024:1998/A1:2001
上传时间： 2013-11-12
上传用户：909000580
UPS电源的简介 UPS（Uninterruptible Power System ），即不间断电源，是一种含有储能装置，以逆变器为主要组成部分的恒压恒频的不间断电源。主要用于给单台计算机、计算机网络系统或其它电力电子设备提供不间断的电力供应。当市电输入正常时，UPS 将市电稳压后供应给负载使用，此时的UPS就是一台交流市电稳压器，同时它还向机内电池充电；当市电中断（事故停电）时， UPS 立即将机内电池的电能，通过逆变转换的方法向负载继续供应220V交流电，使负载维持正常工作并保护负载软、硬件不受损坏。UPS 设备通常对电压过大和电压太低都提供保护。 UPS电源的发展过程与现状 经过一个多世纪的发展，电力已经成为现代工业最重要的能源基础。随着工业文明的不断进步，现代工业对电力质量的要求越来越高，为了保障工业过程以及日常工作的连续性，UPS应运而生，成功的解决了电力中断以及电力质量差的问题，广泛地应用于工业控制、通信、医疗、计算机、交通、银行、证券等。经过几十年的发展，UPS技术El新月异，管理体系不断完善，功能更加强大，应用范围也随着现代科技的发展不断的扩大。 UPS电源的未来发展趋势 市场需求促进了UPS性能的不断提高，科技的进步则推动了UPS技术了不断的向前发展，使UPS向高频化、冗余并联化、数字化、可靠化、智能化、绿色化、经济化发展。
上传时间： 2013-10-18
上传用户：zhishenglu
Arduino 是一块基于开放原始代码的Simple i/o 平台，并且具有使用类似java,C 语言的开发环境。让您可以快速 使用Arduino 语言与Flash 或Processing…等软件，作出互动作品。Arduino 可以使用开发完成的电子元件例如Switch 或Sensors 或其他控制器、ＬＥＤ、步进电机或其他输出裝置。Arduino 也可以独立运作成为一个可以跟软件沟通的平台，例如说：flash processing Max/MSP VVVV 或其他互动软件… Arduino 开发ＩＤＥ界面基于开放原始码原则，可以让您免费下载使用开发出更多令人惊奇的互动作品。 什么是Roboduino? DFRduino 与Arduino 完全兼容，只是在原来的基础上作了些改进。Arduino 的IO 使用的孔座，做互动作品需要面包板和针线搭配才能进行，而DFRduino 的IO 使用针座，使用我们的杜邦线就可以直接把各种传感器连接到DFRduino 上。 特色描述 1． 开放原始码的电路图设计，程式开发界面免费下载，也可依需求自己修改!! 2． DFRduino 可使用ISP 下载线，自我將新的IC 程序烧入「bootloader」； 3． 可依据官方电路图，简化DFRduino 模组，完成独立云作的微处理控制器； 4． 可简单地与传感器、各式各样的电子元件连接(如：红外线,超声波,热敏电阻,光敏电阻,伺服电机等)； 5． 支援多样的互动程式 如: Flash,Max/Msp,VVVV,PD,C,Processing 等； 6． 使用低价格的微处理控制器(ATMEGA168V-10PI)； 7． USB 接口，不需外接电源，另外有提供9VDC 输入接口； 8． 应用方面，利用DFRduino，突破以往只能使用滑鼠，键盘，CCD 等输入的裝置的互动內容，可以更简单地达成单人或多人游戏互动。 性能描述 1． Digital I/O 数字输入/输出端共 0~13。 2． Analog I/O 模拟输入/输出端共 0~5。 3． 支持USB 接口协议及供电(不需外接电源)。 4． 支持ISP 下载功能。 5． 支持单片机TX/RX 端子。 6． 支持USB TX/RX 端子。 7． 支持AREF 端子。 8． 支持六組PWM 端子(Pin11,Pin10,Pin9，Pin6,Pin5,Pin3)。 9． 输入电压：接上USB 时无须外部供电或外部5V~9V DC 输入。 10．输出电压：5V DC 输出和3.3V DC 输出 和外部电源输入。 11．采用Atmel Atmega168V-10PI 单片机。 12．DFRduino 大小尺寸：宽70mm X 高54mm。 Arduino开发板图片
上传时间： 2013-10-30
上传用户：wangzhen1990
