blu<b>EZ-lib</b>

ARINC429总线

•ARINC429总线协议是美国航空电子工程委员会(Airlines Engineering Committee)于1977年7月提出的，并于同年发表并获得批准使用，它的全称是数字式信息传输系统(Digital Information Transmission System ) 。协议标准规定了航空电子设备及有关系统间的数字信息传输要求。ARINC429广泛应用在先进的民航客机中，如B-737、B-757、B-767，俄制军用飞机也选用了类似的技术。

标签： ARINC429 总线

上传时间： 2015-03-25

上传用户：423619775
ISIS Timer Design

A design about 8051 (running at 12MHz) based system with 3 7-Seg displays and two buttons to implement the following functions. 1. When press the + button, the display C = A+B. 2. When press the button, the display C = A - B. “A” and “B” are 8-bit inputs when “C” is 9-bit output.

标签： ISIS AT89C52

上传时间： 2015-05-05

上传用户：guoxiy
红外解码程序

/* * _168ZHONGDUAN2.c * * Created: 2014/11/2 15:12:45 * Author: lenovo */ #include <avr/io.h> #include <avr/iom168pa.h> #include <avr/interrupt.h> #include <util/delay.h> #include <avr/eeprom.h> //#include <util/delay_basic.h> //unsigned char const SEGtable[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x40}; #define BIT(x) (1<<(x)) #include<avr/signal.h> #include<avr/pgmspace.h> #include<util/delay.h> #include<avr/eeprom.h> #define setb(val,bitn) (val|=(1<<(bitn)))//设置某IO口某位为1 #define clr(val,bitn) (val&=~(1<<(bitn)))//设置某IO口某位为0 #define get(val,bitn) (val&(1<<(bitn)))//读取某位状态 //uchar ACT[8] ={0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f}; #define CPL_BIT(x,y) (x^=(1<<y)) #define CLR_BIT(x,y) (x&=~(1<<y)) #define SET_1(a,b) a|=(1<<b) #define CLE_0(a,b) a&=~(1<<b) /*------宏定义------*/ #include <avr/wdt.h> #include <avr/sleep.h> #include <avr/interrupt.h> #include <avr/pgmspace.h> #include <util/delay.h> #include <avr/eeprom.h> #define setb(val,bitn) (val|=(1<<(bitn)))//设置某IO口某位为1 #define clr(val,bitn) (val&=~(1<<(bitn)))//设置某IO口某位为0 #define get(val,bitn) (val&(1<<(bitn)))//读取某位状态 #define uint8 unsigned char #define uint16 unsigned int #define P_LCDCS1 setb(PORTB,5) #define P_LCDCS0 clr(PORTB,5) #define P_LCDRST1 setb(PORTB,1) #define P_LCDRST0 clr(PORTB,1) #define P_LCDRS1 setb(PORTB,2) #define P_LCDRS0 clr(PORTB,2) #define P_LCDDAT1 setb(PORTB,4) #define P_LCDDAT0 clr(PORTB,4) #define P_LCDCLK1 setb(PORTB,3) #define P_LCDCLK0 clr(PORTB,3) //#define LCD_ //-----页地址定义----- #define Page1 0 #define Page2 1 #define Page3 2 #define Page4 3 #define Page5 4 #define Page6 5 #define Page7 6 #define Page8 7 //-----列地址定义-----每8列地址增1 #define List8_1 0 #define List8_2 7 #define List8_3 15 #define List8_4 23 #define List8_5 31 #define List8_6 39 #define List8_7 47 #define List8_8 55 #define List8_9 63 #define List8_10 71 #define List8_11 79 #define List8_12 87 #define List8_13 95 #define List8_14 103 #define List8_15 111 #define List8_16 119 //#define List8_17 127 //-----列地址定义-----每16列地址增1 #define List16_1 0 #define List16_2 15 #define List16_3 31 #define List16_4 47 #define List16_5 63 #define List16_6 79 #define List16_7 95 #define List16_8 111 //---------------------------------- #define STR_CHARG "Charge" //提示充电 #define STR_PRCE "%" //电量百分比 #define STR_ERR "Err" //出错显示 #define STR_OFF "OFF" //关机显示 //待机显示 #define STR_WAIT1 "Portable UPS" #define STR_WAIT2 "110V/60HZ" #define STR_WAIT3 "Select:DC OR AC" #define STR_WAIT4 "BATTERY:" //开机显示 #define STR_OUTSTATUS "Out Status:" #define STR_DCOUT12V "DC12V" #define STR_DCOUT5V "DC5V" #define STR_ACOUT "AC110V" //#define STR_MAOHAO ":" //====================================== extern uint8 LOCKA[2][16] ; //extern uint8 code BATS[10][16] ; extern uint8 BAT2S[12][32] ; extern uint8 NC[] ; extern uint8 mao_hao[] ; extern uint8 num1[] ; extern uint8 num2[] ; extern uint8 num3[] ; extern uint8 num4[] ; extern uint8 num5[] ; extern uint8 num6[] ; extern uint8 num7[] ; extern uint8 num8[] ; extern uint8 num9[] ; extern uint8 Tab_Ascii_8x16[95][16] ; extern uint8 Tab_Ascii_5x7[95][5] ; extern uint8 zhuang1[] ; extern uint8 tai1[] ; extern uint8 shi1[] ; extern uint8 yong1[] ; //---------------------------------- //extern void LcdWriteCommand(uint8 data1) ; extern void Display_Graphic_32x32(uint8 page,uint8 column,uint8 *dp) ; extern void Display_Graphic_32x16(uint8 page,uint8 column,uint8 *dp) ; extern void Display_Graphic_16x16(uint8 page,uint8 column,uint8 *dp) ; extern void Display_Graphic_8x16(uint8 page,uint8 column,uint8 *dp) ; extern void Display_String_8x16(uint8 page,uint8 column,uint8 *text) ; extern void Display_Num_8x16(uint8 page,uint8 column,uint8 Num) ; extern void Display_Digital_8x16(uint8 page,uint8 column,uint8 *a) ; extern void Display_Nop_8x16(uint8 page,uint8 column,uint8 DatLong) ; extern void Display_String_5x7(uint8 page,uint8 column,uint8 *text) ; extern void Full_Display(void) ; extern void Clear_Screen(void) ; extern void Init_lcd12864(void) ; //#endif //========c12864.c============================================== /*************************************************** LCD:晶联讯电子 JLX12864G-086-PN(不带字库IC-UC1701X) 仅支持串行驱动方式 ***************************************************/ //#include "global.h" //#include "c12864.h" #define Tab_Ascii_8x16_CALL1 //粗体字形 #define Tab_Ascii_8x16_CALL2 //细体字形 #define Tab_Ascii_5x7_CALL #define Display_Graphic_32x32_CALL #define Display_Graphic_32x16_CALL #define Display_Graphic_16x16_CALL #define Display_Graphic_8x16_CALL #define Display_String_8x16_CALL //显示字符串 #define Display_Num_8x16_CALL //显示单个数据0-9 #define Display_Digital_8x16_CALL //显示数据0-9999 #define Display_Nop_8x16_CALL //填充8*16的空字符N个 #define Display_String_5x7_CALL #define Full_Display_CALL //============================================================================== uint8 aa[]={0,1,2,3,4,5,6,7,8,9}; uint8 LOCKA[2][16]={ //-- 童锁符号 -- //-- 此字体下对应的点阵为：宽x高=16x16 -- //0x00, 0x00, 0xc0, 0xe0, 0xf0, 0xd8, 0xcc, 0xc4, 0xc4, 0xcc, 0xd8, 0xf0, 0xe0, 0xc0, 0x00, 0x00, //0x00, 0x00, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xe0, 0xb0, 0x98, 0x8c, 0x8c, 0x8c, 0x8c, 0x98, 0xb0, 0xe0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x00, 0x00, } ; const PROGMEM uint8_t BATS[10][16]={ //-- 电池符号 -- //-- 此字体下对应的点阵为：宽x高=16x16 -- 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0x0c, 0x0e, 0x0e, 0x0c, 0x08, 0x08, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0x0c, 0x0e, 0x0e, 0x0c, 0x08, 0x08, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x70, 0x70, 0x70, 0x70, 0x70, 0x70, 0x70, 0x70, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0x0c, 0x0e, 0x0e, 0x0c, 0x08, 0x08, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x7e, 0x7e, 0x7e, 0x7e, 0x7e, 0x7e, 0x7e, 0x7e, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xc8, 0xc8, 0xcc, 0xce, 0xce, 0xcc, 0xc8, 0xc8, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0xf8, 0xf8, 0xfc, 0xfe, 0xfe, 0xfc, 0xf8, 0xf8, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x7f, 0x00, 0x00, 0x00, }; const PROGMEM uint8_t BAT2S1[12][32]={ /*-- 电池符号 --*/ /*-- 此字体下对应的点阵为：宽x高=32x16 --*/ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x07, 0x03}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x07, 0x03}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x07, 0x03}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x07, 0x03}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x07, 0x03}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xe8, 0xe8, 0x08, 0x08, 0xf8, 0xc0, 0x80}, {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x2f, 0x2f, 0x20, 0x20, 0x3f, 0x07, 0x03}, } ; const PROGMEM uint8_t BAT2S2[2][32]={ //-- 电池符号不显示 -- //-- 此字体下对应的点阵为：宽x高=32x16 -- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, } ; uint8 NC[]={ /*-- 文字: 空符号 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, } ; uint8 mao_hao[]={ /*-- 文字: : (冒号） --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00}; uint8 num0[]={ /*-- 文字: 0 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00 }; uint8 num1[]={ /*-- 文字: 1 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00 }; uint8 num2[]={ /*-- 文字: 2 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00 //细体 //0x08,0x0C,0x84,0xC4,0x64,0x3C,0x18,0x00,0x0E,0x0F,0x09,0x08,0x08,0x0C,0x0C,0x00, // 粗体 }; uint8 num3[]={ /*-- 文字: 3 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00 }; uint8 num4[]={ /*-- 文字: 4 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00 }; uint8 num5[]={ /*-- 文字: 5 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00 }; uint8 num6[]={ /*-- 文字: 6 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00 }; uint8 num7[]={ /*-- 文字: 7 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00 }; uint8 num8[]={ /*-- 文字: 8 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00 }; uint8 num9[]={ /*-- 文字: 9 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00 }; //=======8x16======================================================================= #ifdef Display_String_8x16_CALL //Tab_Ascii_8x16_CALL const PROGMEM uint8_t Tab_Ascii_8x161[95][16]={ //粗体字形 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // - - 0x00,0x00,0x38,0xFC,0xFC,0x38,0x00,0x00,0x00,0x00,0x00,0x0D,0x0D,0x00,0x00,0x00, // -!- 0x00,0x0E,0x1E,0x00,0x00,0x1E,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // -"- 0x20,0xF8,0xF8,0x20,0xF8,0xF8,0x20,0x00,0x02,0x0F,0x0F,0x02,0x0F,0x0F,0x02,0x00, // -#- 0x38,0x7C,0x44,0x47,0x47,0xCC,0x98,0x00,0x03,0x06,0x04,0x1C,0x1C,0x07,0x03,0x00, // -$- 0x30,0x30,0x00,0x80,0xC0,0x60,0x30,0x00,0x0C,0x06,0x03,0x01,0x00,0x0C,0x0C,0x00, // -%- 0x80,0xD8,0x7C,0xE4,0xBC,0xD8,0x40,0x00,0x07,0x0F,0x08,0x08,0x07,0x0F,0x08,0x00, // -&- 0x00,0x10,0x1E,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // -'- 0x00,0x00,0xF0,0xF8,0x0C,0x04,0x00,0x00,0x00,0x00,0x03,0x07,0x0C,0x08,0x00,0x00, // -(- 0x00,0x00,0x04,0x0C,0xF8,0xF0,0x00,0x00,0x00,0x00,0x08,0x0C,0x07,0x03,0x00,0x00, // -)- 0x80,0xA0,0xE0,0xC0,0xC0,0xE0,0xA0,0x80,0x00,0x02,0x03,0x01,0x01,0x03,0x02,0x00, // -*- 0x00,0x80,0x80,0xE0,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x03,0x03,0x00,0x00,0x00, // -+- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x1E,0x0E,0x00,0x00,0x00, // -,- 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // --- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0C,0x0C,0x00,0x00,0x00, // -.- 0x00,0x00,0x00,0x80,0xC0,0x60,0x30,0x00,0x0C,0x06,0x03,0x01,0x00,0x00,0x00,0x00, // -/- 0xF8,0xFC,0x04,0xC4,0x24,0xFC,0xF8,0x00,0x07,0x0F,0x09,0x08,0x08,0x0F,0x07,0x00, // -0- 0x00,0x10,0x18,0xFC,0xFC,0x00,0x00,0x00,0x00,0x08,0x08,0x0F,0x0F,0x08,0x08,0x00, // -1- 0x08,0x0C,0x84,0xC4,0x64,0x3C,0x18,0x00,0x0E,0x0F,0x09,0x08,0x08,0x0C,0x0C,0x00, // -2- 0x08,0x0C,0x44,0x44,0x44,0xFC,0xB8,0x00,0x04,0x0C,0x08,0x08,0x08,0x0F,0x07,0x00, // -3- 0xC0,0xE0,0xB0,0x98,0xFC,0xFC,0x80,0x00,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00, // -4- 0x7C,0x7C,0x44,0x44,0xC4,0xC4,0x84,0x00,0x04,0x0C,0x08,0x08,0x08,0x0F,0x07,0x00, // -5- 0xF0,0xF8,0x4C,0x44,0x44,0xC0,0x80,0x00,0x07,0x0F,0x08,0x08,0x08,0x0F,0x07,0x00, // -6- 0x0C,0x0C,0x04,0x84,0xC4,0x7C,0x3C,0x00,0x00,0x00,0x0F,0x0F,0x00,0x00,0x00,0x00, // -7- 0xB8,0xFC,0x44,0x44,0x44,0xFC,0xB8,0x00,0x07,0x0F,0x08,0x08,0x08,0x0F,0x07,0x00, // -8- 0x38,0x7C,0x44,0x44,0x44,0xFC,0xF8,0x00,0x00,0x08,0x08,0x08,0x0C,0x07,0x03,0x00, // -9- 0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x06,0x00,0x00,0x00, // -:- 0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x08,0x0E,0x06,0x00,0x00,0x00, // -;- 0x00,0x80,0xC0,0x60,0x30,0x18,0x08,0x00,0x00,0x00,0x01,0x03,0x06,0x0C,0x08,0x00, // -<- 0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x00, // -=- 0x00,0x08,0x18,0x30,0x60,0xC0,0x80,0x00,0x00,0x08,0x0C,0x06,0x03,0x01,0x00,0x00, // ->- 0x18,0x1C,0x04,0xC4,0xE4,0x3C,0x18,0x00,0x00,0x00,0x00,0x0D,0x0D,0x00,0x00,0x00, // -?- 0xF0,0xF8,0x08,0xC8,0xC8,0xF8,0xF0,0x00,0x07,0x0F,0x08,0x0B,0x0B,0x0B,0x01,0x00, // -@- 0xE0,0xF0,0x98,0x8C,0x98,0xF0,0xE0,0x00,0x0F,0x0F,0x00,0x00,0x00,0x0F,0x0F,0x00, // -A- 0x04,0xFC,0xFC,0x44,0x44,0xFC,0xB8,0x00,0x08,0x0F,0x0F,0x08,0x08,0x0F,0x07,0x00, // -B- 0xF0,0xF8,0x0C,0x04,0x04,0x0C,0x18,0x00,0x03,0x07,0x0C,0x08,0x08,0x0C,0x06,0x00, // -C- 0x04,0xFC,0xFC,0x04,0x0C,0xF8,0xF0,0x00,0x08,0x0F,0x0F,0x08,0x0C,0x07,0x03,0x00, // -D- 0x04,0xFC,0xFC,0x44,0xE4,0x0C,0x1C,0x00,0x08,0x0F,0x0F,0x08,0x08,0x0C,0x0E,0x00, // -E- 0x04,0xFC,0xFC,0x44,0xE4,0x0C,0x1C,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00,0x00,0x00, // -F- 0xF0,0xF8,0x0C,0x84,0x84,0x8C,0x98,0x00,0x03,0x07,0x0C,0x08,0x08,0x07,0x0F,0x00, // -G- 0xFC,0xFC,0x40,0x40,0x40,0xFC,0xFC,0x00,0x0F,0x0F,0x00,0x00,0x00,0x0F,0x0F,0x00, // -H- 0x00,0x00,0x04,0xFC,0xFC,0x04,0x00,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00, // -I- 0x00,0x00,0x00,0x04,0xFC,0xFC,0x04,0x00,0x07,0x0F,0x08,0x08,0x0F,0x07,0x00,0x00, // -J- 0x04,0xFC,0xFC,0xC0,0xF0,0x3C,0x0C,0x00,0x08,0x0F,0x0F,0x00,0x01,0x0F,0x0E,0x00, // -K- 0x04,0xFC,0xFC,0x04,0x00,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x08,0x0C,0x0E,0x00, // -L- 0xFC,0xFC,0x38,0x70,0x38,0xFC,0xFC,0x00,0x0F,0x0F,0x00,0x00,0x00,0x0F,0x0F,0x00, // -M- 0xFC,0xFC,0x38,0x70,0xE0,0xFC,0xFC,0x00,0x0F,0x0F,0x00,0x00,0x00,0x0F,0x0F,0x00, // -N- 0xF0,0xF8,0x0C,0x04,0x0C,0xF8,0xF0,0x00,0x03,0x07,0x0C,0x08,0x0C,0x07,0x03,0x00, // -O- 0x04,0xFC,0xFC,0x44,0x44,0x7C,0x38,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00,0x00,0x00, // -P- 0xF8,0xFC,0x04,0x04,0x04,0xFC,0xF8,0x00,0x07,0x0F,0x08,0x0E,0x3C,0x3F,0x27,0x00, // -Q- 0x04,0xFC,0xFC,0x44,0xC4,0xFC,0x38,0x00,0x08,0x0F,0x0F,0x00,0x00,0x0F,0x0F,0x00, // -R- 0x18,0x3C,0x64,0x44,0xC4,0x9C,0x18,0x00,0x06,0x0E,0x08,0x08,0x08,0x0F,0x07,0x00, // -S- 0x00,0x1C,0x0C,0xFC,0xFC,0x0C,0x1C,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00, // -T- 0xFC,0xFC,0x00,0x00,0x00,0xFC,0xFC,0x00,0x07,0x0F,0x08,0x08,0x08,0x0F,0x07,0x00, // -U- 0xFC,0xFC,0x00,0x00,0x00,0xFC,0xFC,0x00,0x01,0x03,0x06,0x0C,0x06,0x03,0x01,0x00, // -V- 0xFC,0xFC,0x00,0x80,0x00,0xFC,0xFC,0x00,0x03,0x0F,0x0E,0x03,0x0E,0x0F,0x03,0x00, // -W- 0x0C,0x3C,0xF0,0xC0,0xF0,0x3C,0x0C,0x00,0x0C,0x0F,0x03,0x00,0x03,0x0F,0x0C,0x00, // -X- 0x00,0x3C,0x7C,0xC0,0xC0,0x7C,0x3C,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00, // -Y- 0x1C,0x0C,0x84,0xC4,0x64,0x3C,0x1C,0x00,0x0E,0x0F,0x09,0x08,0x08,0x0C,0x0E,0x00, // -Z- 0x00,0x00,0xFC,0xFC,0x04,0x04,0x00,0x00,0x00,0x00,0x0F,0x0F,0x08,0x08,0x00,0x00, // -[- 0x38,0x70,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0x07,0x0E,0x00, // -\- 0x00,0x00,0x04,0x04,0xFC,0xFC,0x00,0x00,0x00,0x00,0x08,0x08,0x0F,0x0F,0x00,0x00, // -]- 0x08,0x0C,0x06,0x03,0x06,0x0C,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // -^- 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20, // -_- 0x00,0x00,0x03,0x07,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // -`- 0x00,0xA0,0xA0,0xA0,0xE0,0xC0,0x00,0x00,0x07,0x0F,0x08,0x08,0x07,0x0F,0x08,0x00, // -a- 0x04,0xFC,0xFC,0x20,0x60,0xC0,0x80,0x00,0x08,0x0F,0x07,0x08,0x08,0x0F,0x07,0x00, // -b- 0xC0,0xE0,0x20,0x20,0x20,0x60,0x40,0x00,0x07,0x0F,0x08,0x08,0x08,0x0C,0x04,0x00, // -c- 0x80,0xC0,0x60,0x24,0xFC,0xFC,0x00,0x00,0x07,0x0F,0x08,0x08,0x07,0x0F,0x08,0x00, // -d- 0xC0,0xE0,0xA0,0xA0,0xA0,0xE0,0xC0,0x00,0x07,0x0F,0x08,0x08,0x08,0x0C,0x04,0x00, // -e- 0x40,0xF8,0xFC,0x44,0x0C,0x18,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00,0x00,0x00, // -f- 0xC0,0xE0,0x20,0x20,0xC0,0xE0,0x20,0x00,0x27,0x6F,0x48,0x48,0x7F,0x3F,0x00,0x00, // -g- 0x04,0xFC,0xFC,0x40,0x20,0xE0,0xC0,0x00,0x08,0x0F,0x0F,0x00,0x00,0x0F,0x0F,0x00, // -h- 0x00,0x00,0x20,0xEC,0xEC,0x00,0x00,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00, // -i- 0x00,0x00,0x00,0x00,0x20,0xEC,0xEC,0x00,0x00,0x30,0x70,0x40,0x40,0x7F,0x3F,0x00, // -j- 0x04,0xFC,0xFC,0x80,0xC0,0x60,0x20,0x00,0x08,0x0F,0x0F,0x01,0x03,0x0E,0x0C,0x00, // -k- 0x00,0x00,0x04,0xFC,0xFC,0x00,0x00,0x00,0x00,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00, // -l- 0xE0,0xE0,0x60,0xC0,0x60,0xE0,0xC0,0x00,0x0F,0x0F,0x00,0x0F,0x00,0x0F,0x0F,0x00, // -m- 0x20,0xE0,0xC0,0x20,0x20,0xE0,0xC0,0x00,0x00,0x0F,0x0F,0x00,0x00,0x0F,0x0F,0x00, // -n- 0xC0,0xE0,0x20,0x20,0x20,0xE0,0xC0,0x00,0x07,0x0F,0x08,0x08,0x08,0x0F,0x07,0x00, // -o- 0x20,0xE0,0xC0,0x20,0x20,0xE0,0xC0,0x00,0x40,0x7F,0x7F,0x48,0x08,0x0F,0x07,0x00, // -p- 0xC0,0xE0,0x20,0x20,0xC0,0xE0,0x20,0x00,0x07,0x0F,0x08,0x48,0x7F,0x7F,0x40,0x00, // -q- 0x20,0xE0,0xC0,0x60,0x20,0x60,0xC0,0x00,0x08,0x0F,0x0F,0x08,0x00,0x00,0x00,0x00, // -r- 0x40,0xE0,0xA0,0x20,0x20,0x60,0x40,0x00,0x04,0x0C,0x09,0x09,0x0B,0x0E,0x04,0x00, // -s- 0x20,0x20,0xF8,0xFC,0x20,0x20,0x00,0x00,0x00,0x00,0x07,0x0F,0x08,0x0C,0x04,0x00, // -t- 0xE0,0xE0,0x00,0x00,0xE0,0xE0,0x00,0x00,0x07,0x0F,0x08,0x08,0x07,0x0F,0x08,0x00, // -u- 0x00,0xE0,0xE0,0x00,0x00,0xE0,0xE0,0x00,0x00,0x03,0x07,0x0C,0x0C,0x07,0x03,0x00, // -v- 0xE0,0xE0,0x00,0x00,0x00,0xE0,0xE0,0x00,0x07,0x0F,0x0C,0x07,0x0C,0x0F,0x07,0x00, // -w- 0x20,0x60,0xC0,0x80,0xC0,0x60,0x20,0x00,0x08,0x0C,0x07,0x03,0x07,0x0C,0x08,0x00, // -x- 0xE0,0xE0,0x00,0x00,0x00,0xE0,0xE0,0x00,0x47,0x4F,0x48,0x48,0x68,0x3F,0x1F,0x00, // -y- 0x60,0x60,0x20,0xA0,0xE0,0x60,0x20,0x00,0x0C,0x0E,0x0B,0x09,0x08,0x0C,0x0C,0x00, // -z- 0x00,0x40,0x40,0xF8,0xBC,0x04,0x04,0x00,0x00,0x00,0x00,0x07,0x0F,0x08,0x08,0x00, // -{- 0x00,0x00,0x00,0xBC,0xBC,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x0F,0x00,0x00,0x00, // -|- 0x00,0x04,0x04,0xBC,0xF8,0x40,0x40,0x00,0x00,0x08,0x08,0x0F,0x07,0x00,0x00,0x00, // -}- 0x08,0x0C,0x04,0x0C,0x08,0x0C,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // -~- } ; #endif //Tab_Ascii_8x16_CALL1 //=======8x16======================================================================= //#ifdef Tab_Ascii_8x16_CALL2 // #ifdef Display_Num_8x16_CALL const PROGMEM uint8_t Tab_Ascii_8x162[95][16]={ //细体字形 /*-- 文字: --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*-- 文字: ! --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00, /*-- 文字: " --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*-- 文字: # --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00, /*-- 文字: $ --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00, /*-- 文字: % --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00, /*-- 文字: & --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10, /*-- 文字: ' --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*-- 文字: ( --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00, /*-- 文字: ) --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00, /*-- 文字: * --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00, /*-- 文字: + --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00, /*-- 文字: , --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00, /*-- 文字: - --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01, /*-- 文字: . --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00, /*-- 文字: / --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00, /*-- 文字: 0 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00, /*-- 文字: 1 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00, /*-- 文字: 2 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00, /*-- 文字: 3 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: 4 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00, /*-- 文字: 5 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: 6 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: 7 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00, /*-- 文字: 8 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00, /*-- 文字: 9 --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00, /*-- 文字: : --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00, /*-- 文字: ; --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00, /*-- 文字: < --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00, /*-- 文字: = --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00, /*-- 文字: > --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00, /*-- 文字: ? --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00, /*-- 文字: @ --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00, /*-- 文字: A --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20, /*-- 文字: B --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: C --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00, /*-- 文字: D --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00, /*-- 文字: E --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00, /*-- 文字: F --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00, /*-- 文字: G --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00, /*-- 文字: H --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20, /*-- 文字: I --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00, /*-- 文字: J --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00, /*-- 文字: K --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00, /*-- 文字: L --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00, /*-- 文字: M --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00, /*-- 文字: N --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00, /*-- 文字: O --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00, /*-- 文字: P --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00, /*-- 文字: Q --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00, /*-- 文字: R --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20, /*-- 文字: S --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00, /*-- 文字: T --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00, /*-- 文字: U --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00, /*-- 文字: V --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00, /*-- 文字: W --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00, /*-- 文字: X --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20, /*-- 文字: Y --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00, /*-- 文字: Z --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00, /*-- 文字: [ --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00, /*-- 文字: \ --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00, /*-- 文字: ] --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00, /*-- 文字: ^ --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*-- 文字: _ --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80, /*-- 文字: ` --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*-- 文字: a --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20, /*-- 文字: b --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: c --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00, /*-- 文字: d --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20, /*-- 文字: e --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00, /*-- 文字: f --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00, /*-- 文字: g --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00, /*-- 文字: h --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20, /*-- 文字: i --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00, /*-- 文字: j --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00, /*-- 文字: k --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00, /*-- 文字: l --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00, /*-- 文字: m --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F, /*-- 文字: n --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20, /*-- 文字: o --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00, /*-- 文字: p --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00, /*-- 文字: q --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80, /*-- 文字: r --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00, /*-- 文字: s --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00, /*-- 文字: t --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00, /*-- 文字: u --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20, /*-- 文字: v --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00, /*-- 文字: w --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00, /*-- 文字: x --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00, /*-- 文字: y --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00, /*-- 文字: z --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00, /*-- 文字: { --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40, /*-- 文字: | --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00, /*-- 文字: } --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00, /*-- 文字: ~ --*/ /*-- Comic Sans MS12; 此字体下对应的点阵为：宽x高=8x16 --*/ 0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 }; ///#endif //#endif //Tab_Ascii_8x16_CALL1 //=======5x7======================================================================= //#ifdef Tab_Ascii_5x7_CALL const PROGMEM uint8_t Tab_Ascii_5x71[95][5]={ /*全体ASCII 列表:5x7点阵*/ 0x00,0x00,0x00,0x00,0x00,//space 0x00,0x00,0x4f,0x00,0x00,//! 0x00,0x07,0x00,0x07,0x00,//" 0x14,0x7f,0x14,0x7f,0x14,//# 0x24,0x2a,0x7f,0x2a,0x12,//$ 0x23,0x13,0x08,0x64,0x62,//% 0x36,0x49,0x55,0x22,0x50,//& 0x00,0x05,0x07,0x00,0x00,//] 0x00,0x1c,0x22,0x41,0x00,//( 0x00,0x41,0x22,0x1c,0x00,//) 0x14,0x08,0x3e,0x08,0x14,//* 0x08,0x08,0x3e,0x08,0x08,//+ 0x00,0x50,0x30,0x00,0x00,//, 0x08,0x08,0x08,0x08,0x08,//- 0x00,0x60,0x60,0x00,0x00,//. 0x20,0x10,0x08,0x04,0x02,/// 0x3e,0x51,0x49,0x45,0x3e,//0 0x00,0x42,0x7f,0x40,0x00,//1 0x42,0x61,0x51,0x49,0x46,//2 0x21,0x41,0x45,0x4b,0x31,//3 0x18,0x14,0x12,0x7f,0x10,//4 0x27,0x45,0x45,0x45,0x39,//5 0x3c,0x4a,0x49,0x49,0x30,//6 0x01,0x71,0x09,0x05,0x03,//7 0x36,0x49,0x49,0x49,0x36,//8 0x06,0x49,0x49,0x29,0x1e,//9 0x00,0x36,0x36,0x00,0x00,//: 0x00,0x56,0x36,0x00,0x00,//; 0x08,0x14,0x22,0x41,0x00,//< 0x14,0x14,0x14,0x14,0x14,//= 0x00,0x41,0x22,0x14,0x08,//> 0x02,0x01,0x51,0x09,0x06,//? 0x32,0x49,0x79,0x41,0x3e,//@ 0x7e,0x11,0x11,0x11,0x7e,//A 0x7f,0x49,0x49,0x49,0x36,//B 0x3e,0x41,0x41,0x41,0x22,//C 0x7f,0x41,0x41,0x22,0x1c,//D 0x7f,0x49,0x49,0x49,0x41,//E 0x7f,0x09,0x09,0x09,0x01,//F 0x3e,0x41,0x49,0x49,0x7a,//G 0x7f,0x08,0x08,0x08,0x7f,//H 0x00,0x41,0x7f,0x41,0x00,//I 0x20,0x40,0x41,0x3f,0x01,//J 0x7f,0x08,0x14,0x22,0x41,//K 0x7f,0x40,0x40,0x40,0x40,//L 0x7f,0x02,0x0c,0x02,0x7f,//M 0x7f,0x04,0x08,0x10,0x7f,//N 0x3e,0x41,0x41,0x41,0x3e,//O 0x7f,0x09,0x09,0x09,0x06,//P 0x3e,0x41,0x51,0x21,0x5e,//Q 0x7f,0x09,0x19,0x29,0x46,//R 0x46,0x49,0x49,0x49,0x31,//S 0x01,0x01,0x7f,0x01,0x01,//T 0x3f,0x40,0x40,0x40,0x3f,//U 0x1f,0x20,0x40,0x20,0x1f,//V 0x3f,0x40,0x38,0x40,0x3f,//W 0x63,0x14,0x08,0x14,0x63,//X 0x07,0x08,0x70,0x08,0x07,//Y 0x61,0x51,0x49,0x45,0x43,//Z 0x00,0x7f,0x41,0x41,0x00,//[ 0x02,0x04,0x08,0x10,0x20,//\ 0x00,0x41,0x41,0x7f,0x00,//] 0x04,0x02,0x01,0x02,0x04,//^ 0x40,0x40,0x40,0x40,0x40,//_ 0x01,0x02,0x04,0x00,0x00,//` 0x20,0x54,0x54,0x54,0x78,//a 0x7f,0x48,0x48,0x48,0x30,//b 0x38,0x44,0x44,0x44,0x44,//c 0x30,0x48,0x48,0x48,0x7f,//d 0x38,0x54,0x54,0x54,0x58,//e 0x00,0x08,0x7e,0x09,0x02,//f 0x48,0x54,0x54,0x54,0x3c,//g 0x7f,0x08,0x08,0x08,0x70,//h 0x00,0x00,0x7a,0x00,0x00,//i 0x20,0x40,0x40,0x3d,0x00,//j 0x7f,0x20,0x28,0x44,0x00,//k 0x00,0x41,0x7f,0x40,0x00,//l 0x7c,0x04,0x38,0x04,0x7c,//m 0x7c,0x08,0x04,0x04,0x78,//n 0x38,0x44,0x44,0x44,0x38,//o 0x7c,0x14,0x14,0x14,0x08,//p 0x08,0x14,0x14,0x14,0x7c,//q 0x7c,0x08,0x04,0x04,0x08,//r 0x48,0x54,0x54,0x54,0x24,//s 0x04,0x04,0x3f,0x44,0x24,//t 0x3c,0x40,0x40,0x40,0x3c,//u 0x1c,0x20,0x40,0x20,0x1c,//v 0x3c,0x40,0x30,0x40,0x3c,//w 0x44,0x28,0x10,0x28,0x44,//x 0x04,0x48,0x30,0x08,0x04,//y 0x44,0x64,0x54,0x4c,0x44,//z 0x08,0x36,0x41,0x41,0x00,//{ 0x00,0x00,0x77,0x00,0x00,//| 0x00,0x41,0x41,0x36,0x08,//} 0x04,0x02,0x02,0x02,0x01,//~ }; //#endif //Tab_Ascii_5x7_CALL uint8 zhuang1[]={ /*-- 文字: 状 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=16x16 --*/ 0x08,0x30,0x00,0xFF,0x20,0x20,0x20,0x20,0xFF,0x20,0xE1,0x26,0x2C,0x20,0x20,0x00, 0x04,0x02,0x01,0xFF,0x40,0x20,0x18,0x07,0x00,0x00,0x03,0x0C,0x30,0x60,0x20,0x00 }; uint8 tai1[]={ /*-- 文字: 态 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=16x16 --*/ 0x00,0x04,0x04,0x04,0x84,0x44,0x34,0x4F,0x94,0x24,0x44,0x84,0x84,0x04,0x00,0x00, 0x00,0x60,0x39,0x01,0x00,0x3C,0x40,0x42,0x4C,0x40,0x40,0x70,0x04,0x09,0x31,0x00 }; uint8 shi1[]={ /*-- 文字: 使 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=16x16 --*/ 0x40,0x20,0xF0,0x1C,0x07,0xF2,0x94,0x94,0x94,0xFF,0x94,0x94,0x94,0xF4,0x04,0x00, 0x00,0x00,0x7F,0x00,0x40,0x41,0x22,0x14,0x0C,0x13,0x10,0x30,0x20,0x61,0x20,0x00 }; uint8 yong1[]={ /*-- 文字: 用 --*/ /*-- 宋体12; 此字体下对应的点阵为：宽x高=16x16 --*/ 0x00,0x00,0x00,0xFE,0x22,0x22,0x22,0x22,0xFE,0x22,0x22,0x22,0x22,0xFE,0x00,0x00, 0x80,0x40,0x30,0x0F,0x02,0x02,0x02,0x02,0xFF,0x02,0x02,0x42,0x82,0x7F,0x00,0x00 }; //x=9 y=16 点阵 0-9 const PROGMEM uint8_t lcd_numbers_lit[]={ 0x00,0xE0,0xE0,0x60,0x20,0x60,0xE0,0xE0,0x00,//0 0x00,0x7F,0x7F,0x60,0x40,0x60,0x7F,0x7F,0x00, 0x00,0x00,0x40,0x40,0xE0,0xE0,0x00,0x00,0x00,//1 0x00,0x00,0x00,0x00,0x7F,0x7F,0x00,0x00,0x00, 0x00,0xE0,0xE0,0x20,0x20,0xE0,0xE0,0xC0,0x00,//2 0x00,0x71,0x79,0x78,0x5E,0x47,0x43,0x41,0x00, 0x00,0xE0,0xE0,0x20,0x20,0xE0,0xE0,0xC0,0x00,//3 0x00,0x78,0x78,0x42,0x47,0x7F,0x7D,0x39,0x00, 0x00,0x00,0x00,0x80,0xE0,0xE0,0xE0,0x00,0x00,//4 0x00,0x0E,0x0F,0x0B,0x7F,0x7F,0x7F,0x08,0x00, 0x00,0xE0,0xE0,0xE0,0x20,0x20,0x20,0x20,0x00,//5 0x00,0x73,0x73,0x43,0x41,0x7F,0x7F,0x3E,0x00, 0x00,0xE0,0xE0,0x60,0x20,0x60,0x60,0x60,0x00,//6 0x00,0x7F,0x7F,0x43,0x43,0x7F,0x7E,0x3C,0x00, 0x00,0x20,0x20,0x20,0xA0,0xE0,0xE0,0x60,0x00,//7 0x00,0x00,0x40,0x78,0x7F,0x0F,0x01,0x00,0x00, 0x00,0xE0,0xE0,0x20,0x20,0x20,0xE0,0xE0,0x00,//8 0x00,0x7D,0x7D,0x47,0x42,0x47,0x7D,0x7D,0x00, 0x00,0xE0,0xE0,0x20,0x20,0xE0,0xE0,0x80,0x00,//9 0x00,0x67,0x6F,0x4C,0x6C,0x7F,0x3F,0x0F,0x00 }; //x=12 y=16 点阵 0-9数字 const PROGMEM uint8_t lcd_numbers[]={ 0x00,0xF0,0xFC,0xFC,0x0E,0x02,0x02,0x0E,0xFC,0xFC,0xF0,0x00,//0 0x00,0x07,0x3F,0x3F,0x70,0x40,0x40,0x70,0x3F,0x3F,0x07,0x00, 0x00,0x00,0x00,0x08,0x08,0xFC,0xFE,0xFE,0x00,0x00,0x00,0x00,//1 0x00,0x00,0x00,0x00,0x00,0x7F,0x7F,0x7F,0x00,0x00,0x00,0x00, 0x00,0x38,0x3C,0x3E,0x06,0x02,0x86,0xFE,0xFC,0x78,0x00,0x00,//2 0x00,0x60,0x78,0x7C,0x5E,0x4F,0x43,0x41,0x40,0x40,0x00,0x00, 0x00,0x18,0x1C,0x1E,0x86,0x82,0xC6,0xFE,0x7C,0x38,0x00,0x00,//3 0x00,0x1C,0x3C,0x7C,0x60,0x40,0x61,0x7F,0x3F,0x1E,0x00,0x00, 0x00,0x00,0x80,0xC0,0xF0,0x3C,0xFE,0xFE,0xFE,0x00,0x00,0x00,//4 0x00,0x06,0x07,0x05,0x04,0x04,0x7F,0x7F,0x7F,0x04,0x04,0x00, 0x00,0x00,0xFE,0xFE,0xFE,0x62,0x62,0xE2,0xE2,0x82,0x00,0x00,//5 0x00,0x18,0x38,0x78,0x60,0x40,0x60,0x7F,0x3F,0x1F,0x00,0x00, 0x00,0xF0,0xFC,0xFC,0xCE,0x42,0xC6,0xCE,0x8E,0x0C,0x00,0x00,//6 0x00,0x0F,0x3F,0x7F,0x60,0x40,0x60,0x7F,0x3F,0x1F,0x00,0x00, 0x00,0x02,0x02,0x02,0x02,0x82,0xF2,0xFE,0x7E,0x0E,0x00,0x00,//7 0x00,0x00,0x00,0x60,0x7C,0x7F,0x1F,0x03,0x00,0x00,0x00,0x00, 0x00,0x38,0x7C,0x7E,0xC6,0x82,0x82,0xC6,0x7E,0x7C,0x38,0x00,//8 0x00,0x1E,0x3F,0x7F,0x61,0x40,0x40,0x61,0x7F,0x3F,0x1E,0x00, 0x00,0xF8,0xFC,0xFE,0x06,0x02,0x06,0xFE,0xFC,0xF0,0x00,0x00,//9 0x00,0x30,0x71,0x73,0x63,0x42,0x73,0x3F,0x1F,0x07,0x00,0x00, 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//. 0x00,0x00,0x00,0x38,0x38,0x38,0x00,0x00,0x00,0x00,0x00,0x00, 0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,//- 0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x00 }; const PROGMEM uint8_t Tab_Ascii_5x72[95][5]={ /*全体ASCII 列表:5x7点阵*/ 0x00,0x00,0x00,0x00,0x00,//space 0x00,0x00,0x4f,0x00,0x00,//! 0x00,0x07,0x00,0x07,0x00,//" 0x14,0x7f,0x14,0x7f,0x14,//# 0x24,0x2a,0x7f,0x2a,0x12,//$ 0x23,0x13,0x08,0x64,0x62,//% 0x36,0x49,0x55,0x22,0x50,//& 0x00,0x05,0x07,0x00,0x00,//] 0x00,0x1c,0x22,0x41,0x00,//( 0x00,0x41,0x22,0x1c,0x00,//) 0x14,0x08,0x3e,0x08,0x14,//* 0x08,0x08,0x3e,0x08,0x08,//+ 0x00,0x50,0x30,0x00,0x00,//, 0x08,0x08,0x08,0x08,0x08,//- 0x00,0x60,0x60,0x00,0x00,//. 0x20,0x10,0x08,0x04,0x02,/// 0x3e,0x51,0x49,0x45,0x3e,//0 0x00,0x42,0x7f,0x40,0x00,//1 0x42,0x61,0x51,0x49,0x46,//2 0x21,0x41,0x45,0x4b,0x31,//3 0x18,0x14,0x12,0x7f,0x10,//4 0x27,0x45,0x45,0x45,0x39,//5 0x3c,0x4a,0x49,0x49,0x30,//6 0x01,0x71,0x09,0x05,0x03,//7 0x36,0x49,0x49,0x49,0x36,//8 0x06,0x49,0x49,0x29,0x1e,//9 0x00,0x36,0x36,0x00,0x00,//: 0x00,0x56,0x36,0x00,0x00,//; 0x08,0x14,0x22,0x41,0x00,//< 0x14,0x14,0x14,0x14,0x14,//= 0x00,0x41,0x22,0x14,0x08,//> 0x02,0x01,0x51,0x09,0x06,//? 0x32,0x49,0x79,0x41,0x3e,//@ 0x7e,0x11,0x11,0x11,0x7e,//A 0x7f,0x49,0x49,0x49,0x36,//B 0x3e,0x41,0x41,0x41,0x22,//C 0x7f,0x41,0x41,0x22,0x1c,//D 0x7f,0x49,0x49,0x49,0x41,//E 0x7f,0x09,0x09,0x09,0x01,//F 0x3e,0x41,0x49,0x49,0x7a,//G 0x7f,0x08,0x08,0x08,0x7f,//H 0x00,0x41,0x7f,0x41,0x00,//I 0x20,0x40,0x41,0x3f,0x01,//J 0x7f,0x08,0x14,0x22,0x41,//K 0x7f,0x40,0x40,0x40,0x40,//L 0x7f,0x02,0x0c,0x02,0x7f,//M 0x7f,0x04,0x08,0x10,0x7f,//N 0x3e,0x41,0x41,0x41,0x3e,//O 0x7f,0x09,0x09,0x09,0x06,//P 0x3e,0x41,0x51,0x21,0x5e,//Q 0x7f,0x09,0x19,0x29,0x46,//R 0x46,0x49,0x49,0x49,0x31,//S 0x01,0x01,0x7f,0x01,0x01,//T 0x3f,0x40,0x40,0x40,0x3f,//U 0x1f,0x20,0x40,0x20,0x1f,//V 0x3f,0x40,0x38,0x40,0x3f,//W 0x63,0x14,0x08,0x14,0x63,//X 0x07,0x08,0x70,0x08,0x07,//Y 0x61,0x51,0x49,0x45,0x43,//Z 0x00,0x7f,0x41,0x41,0x00,//[ 0x02,0x04,0x08,0x10,0x20,// 0x00,0x41,0x41,0x7f,0x00,//] 0x04,0x02,0x01,0x02,0x04,//^ 0x40,0x40,0x40,0x40,0x40,//_ 0x01,0x02,0x04,0x00,0x00,//` 0x20,0x54,0x54,0x54,0x78,//a 0x7f,0x48,0x48,0x48,0x30,//b 0x38,0x44,0x44,0x44,0x44,//c 0x30,0x48,0x48,0x48,0x7f,//d 0x38,0x54,0x54,0x54,0x58,//e 0x00,0x08,0x7e,0x09,0x02,//f 0x48,0x54,0x54,0x54,0x3c,//g 0x7f,0x08,0x08,0x08,0x70,//h 0x00,0x00,0x7a,0x00,0x00,//i 0x20,0x40,0x40,0x3d,0x00,//j 0x7f,0x20,0x28,0x44,0x00,//k 0x00,0x41,0x7f,0x40,0x00,//l 0x7c,0x04,0x38,0x04,0x7c,//m 0x7c,0x08,0x04,0x04,0x78,//n 0x38,0x44,0x44,0x44,0x38,//o 0x7c,0x14,0x14,0x14,0x08,//p 0x08,0x14,0x14,0x14,0x7c,//q 0x7c,0x08,0x04,0x04,0x08,//r 0x48,0x54,0x54,0x54,0x24,//s 0x04,0x04,0x3f,0x44,0x24,//t 0x3c,0x40,0x40,0x40,0x3c,//u 0x1c,0x20,0x40,0x20,0x1c,//v 0x3c,0x40,0x30,0x40,0x3c,//w 0x44,0x28,0x10,0x28,0x44,//x 0x04,0x48,0x30,0x08,0x04,//y 0x44,0x64,0x54,0x4c,0x44,//z 0x08,0x36,0x41,0x41,0x00,//{ 0x00,0x00,0x77,0x00,0x00,//| 0x00,0x41,0x41,0x36,0x08,//} 0x04,0x02,0x02,0x02,0x01,//~ }; /////////////// #define Start_T1 TCCR1B|=_BV(CS11);TCNT1=0//复位预计分频器并开启定时器T1 #define Stop_T1 TCCR1B&=~_BV(CS11) //关闭定时器T1 //数码管的段码编码 unsigned char table[10] = {0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f}; volatile unsigned char i,j,k; volatile unsigned char IRcode; //定义一个长度为4字节的无符号long类型变量来存储代码 volatile unsigned char IR_OK=0; //IR信号接收有效当程序响应接收以后请马上清零这样才会继续接收下一IR码 volatile unsigned char IR_con=0; //IR信号当前接收位 0时表示第0位即同步码(4.5ms高电平) volatile unsigned int Pulse_length=0; //捕获的脉冲宽度 volatile unsigned char ICP_Parity=0; //捕获中断奇偶次计数 1时为偶次并在此时判断脉宽 volatile unsigned char address; volatile unsigned char code_data; volatile unsigned char code_data1; unsigned char clrbit; #define FREQ 8 //定义单片机工作频率为 4M /////////////// //**************************************************************** // 函数名称：DelayLcd // 函数功能：延时 // 入口参数： // 出口参数： //***************************************************************** void DelayLcd(uint16 i) { uint16 j; for(j=200;j>0;j--) for(;i>0;i--); //while(i--); } //**************************************************************** // 函数名称：LcdWriteCommand // 函数功能：写指令到LCD模块 // 入口参数：数据 // 出口参数： //***************************************************************** void LcdWriteCommand(uint8 data1) // { uint8 i ; P_LCDCS0 ; P_LCDRS0 ; for(i=8;i>0;i--) { P_LCDCLK0; if(data1&0x80) P_LCDDAT1; else P_LCDDAT0; P_LCDCLK1; data1 <<= 1; } } //**************************************************************** // 函数名称：LcdWritedata // 函数功能：写数据到LCD模块 // 入口参数：数据 // 出口参数： //***************************************************************** void LcdWritedata(uint8 data1) // { uint8 i; P_LCDCS0 ; P_LCDRS1 ; for(i=8;i>0;i--) { P_LCDCLK0; if(data1&0x80) P_LCDDAT1; else P_LCDDAT0; P_LCDCLK1; data1 <<= 1; } } //**************************************************************** // 函数名称：Lcd_SetAddr // 函数功能：设置LCD显示地址 // 入口参数：页地址列地址 // 出口参数： //***************************************************************** void Lcd_SetAddr(uint8 page,uint8 column) { //LcdWriteCommand(0xb0 | (y+yy)); //LcdWriteCommand(0x10 | (x>>4)); //LcdWriteCommand(0x00 | (x&0x0f)); //P_LCDCS0 ; LcdWriteCommand(0xb0|page); /*设置页地址*/ LcdWriteCommand((column>>4)|0x10); /*设置列地址的高4位*/ LcdWriteCommand(column&0x0f); /*设置列地址的低4位*/ } ////// void Display_Graphic_32x2(uint8 page,uint8 column,PROGMEM uint8_t *dp) // 电池显示 0、2、4、6、8、10 { uint8 i,j; uint8 page_address; uint8 column_address_L,column_address_H; page_address = 0xb0|page; column_address_L =(column&0x0f); column_address_H =(column>>4)|0x10; P_LCDCS0 ; for(j=0;j<2;j++) { LcdWriteCommand(page_address+j); /*设置页地址*/ LcdWriteCommand(column_address_H); /*设置列地址的高4位*/ LcdWriteCommand(column_address_L); /*设置列地址的低4位*/ for (i=32;i>0;i--) //写32行 { LcdWritedata(pgm_read_byte(dp++)); /*写数据到LCD,每写完一个8位的数据后列地址自动加1*/ } LcdWritedata(0x00); } P_LCDCS1 ; } //#ifdef Display_Graphic_32x32_CALL void Display_Graphic_32x32(uint8 page,uint8 column,PROGMEM uint8_t *dp) { uint8 i,j; uint8 page_address; uint8 column_address_L,column_address_H; page_address = 0xb0|page; column_address_L =(column&0x0f); column_address_H =(column>>4)|0x10; P_LCDCS0 ; &

标签： 程序

上传时间： 2016-03-03

上传用户：彦 yan
429总线协议说明

ARINC429总线协议是美国航空电子工程委员会(Airlines Engineering Committee)于1977年7月提出的，并于同年发表并获得批准使用，它的全称是数字式信息传输系统(Digital Information Transmission System ) 。协议标准规定了航空电子设备及有关系统间的数字信息传输要求。ARINC429广泛应用在先进的民航客机中，如B-737、B-757、B-767，俄制军用飞机也选用了类似的技术。 ARINC429总线结构简单、性能稳定，抗干扰性强。最大的优势在于可靠性高。飞机上的ARINC429数据总线，用于在系统和设备之间传送上千种不同类型的参数，如航向、真空速、马赫数等。

标签： 429总线协议

上传时间： 2016-08-17

上传用户：w50403
12345

/****************temic*********t5557***********************************/ #include <at892051.h> #include <string.h> #include <intrins.h> #include <stdio.h> #define uchar unsigned char #define uint unsigned int #define ulong unsigned long //STC12C2051AD的SFR定义 sfr WDT_CONTR = 0xe1;//stc2051的看门狗?????? /**********全局常量************/ //写卡的命令 #define write_command0 0//写密码 #define write_command1 1//写配置字 #define write_command2 2//密码写数据 #define write_command3 3//唤醒 #define write_command4 4//停止命令 #define TRUE 1 #define FALSE 0 #define OK 0 #define ERROR 255 //读卡的时间参数us #define ts_min 250//270*11.0592/12=249//取近似的整数 #define ts_max 304//330*11.0592/12=304 #define t1_min 73//90*11.0592/12=83:-10调整 #define t1_max 156//180*11.0592/12=166 #define t2_min 184//210*11.0592/12=194 #define t2_max 267//300*11.0592/12=276 //***********不采用中断处理:采用查询的方法读卡时关所有中断****************/ sbit p_U2270B_Standby = P3^5;//p_U2270B_Standby PIN=13 sbit p_U2270B_CFE = P3^3;//p_U2270B_CFE PIN=6 sbit p_U2270B_OutPut = P3^7;//p_U2270B_OutPut PIN=2 sbit wtd_sck = P1^7;//SPI总线 sbit wtd_si = P1^3; sbit wtd_so = P1^2; sbit iic_data = P1^2;//lcd IIC sbit iic_clk = P1^7; sbit led_light = P1^6;//测试绿灯 sbit led_light1 = P1^5;//测试红灯 sbit led_light_ok = P1^1;//读卡成功标志 sbit fengmingqi = P1^5; /***********全局变量************************************/ uchar data Nkey_a[4] = {0xA0, 0xA1, 0xA2, 0xA3};//初始密码 //uchar idata card_snr[4]; //配置字 uchar data bankdata[28] = {1,2,3,4,5,6,7,1,2,3,4,5,6,7,1,2,3,4,5,6,7,1,2,3,4,5,6,7}; //存储卡上用户数据(1-7)7*4=28 uchar data cominceptbuff[6] = {1,2,3,4,5,6};//串口接收数组ram uchar command; //第一个命令 uchar command1;// //uint temp; uchar j,i; uchar myaddr = 8; //uchar ywqz_count,time_count; //ywqz jishu: uchar bdata DATA; sbit BIT0 = DATA^0; sbit BIT1 = DATA^1; sbit BIT2 = DATA^2; sbit BIT3 = DATA^3; sbit BIT4 = DATA^4; sbit BIT5 = DATA^5; sbit BIT6 = DATA^6; sbit BIT7 = DATA^7; uchar bdata DATA1; sbit BIT10 = DATA1^0; sbit BIT11 = DATA1^1; sbit BIT12 = DATA1^2; sbit BIT13 = DATA1^3; sbit BIT14 = DATA1^4; sbit BIT15 = DATA1^5; sbit BIT16 = DATA1^6; sbit BIT17 = DATA1^7; bit i_CurrentLevel;//i_CurrentLevel BIT 00H(Saves current level of OutPut pin of U2270B) bit timer1_end; bit read_ok = 0; //缓存定时值,因用同一个定时器 union HLint { uint W; struct { uchar H;uchar L; } B; };//union HLint idata a union HLint data a; //缓存定时值,因用同一个定时器 union HLint0 { uint W; struct { uchar H; uchar L; } B; };//union HLint idata a union HLint0 data b; /**********************函数原型*****************/ //读写操作 void f_readcard(void);//全部读出1~7 AOR唤醒 void f_writecard(uchar x);//根据命令写不同的内容和操作 void f_clearpassword(void);//清除密码 void f_changepassword(void);//修改密码 //功能子函数 void write_password(uchar data *data p);//写初始密码或数据 void write_block(uchar x,uchar data *data p);//不能用通用指针 void write_bit(bit x);//写位 /*子函数区*****************************************************/ void delay_2(uint x) //延时,时间x*10us@12mhz,最小20us@12mhz { x--; x--; while(x) { _nop_(); _nop_(); x--; } _nop_();//WDT_CONTR=0X3C;不能频繁的复位 _nop_(); } ///////////////////////////////////////////////////////////////////// void initial(void) { SCON = 0x50; //串口方式1,允许接收 //SCON =0x50; //01010000B:10位异步收发,波特率可变,SM2=0不用接收到有效停止位才RI=1, //REN=1允许接收 TMOD = 0x21; //定时器1 定时方式2(8位),定时器0 定时方式1(16位) TCON = 0x40; //设定时器1 允许开始计时(IT1=1) TH1 = 0xfD; //FB 18.432MHz 9600 波特率 TL1 = 0xfD; //fd 11.0592 9600 IE = 0X90; //EA=ES=1 TR1 = 1; //启动定时器 WDT_CONTR = 0x3c;//使能看门狗 p_U2270B_Standby = 0;//单电源 PCON = 0x00; IP = 0x10;//uart you xian XXXPS PT1 PX1 PT0 PX0 led_light1 = 1; led_light = 0; p_U2270B_OutPut = 1; } /************************************************/ void f_readcard()//读卡 { EA = 0;//全关,防止影响跳变的定时器计时 WDT_CONTR = 0X3C;//喂狗 p_U2270B_CFE = 1;// delay_2(232); //>2.5ms /* // aor 用唤醒功能来防碰撞 p_U2270B_CFE = 0; delay_2(18);//start gap>150us write_bit(1);//10=操作码读0页 write_bit(0); write_password(&bankdata[24]);//密码block7 p_U2270B_CFE =1 ;// delay_2(516);//编程及确认时间5.6ms */ WDT_CONTR = 0X3C;//喂狗 led_light = 0; b.W = 0; while(!(read_ok == 1)) { //while(p_U2270B_OutPut);//等一个稳定的低电平?超时判断? while(!p_U2270B_OutPut);//等待上升沿的到来同步信号检测1 TR0 = 1; //deng xia jiang while(p_U2270B_OutPut);//等待下降沿 TR0 = 0; a.B.H = TH0; a.B.L = TL0; TH0 = TL0 = 0; TR0 = 1;//定时器晚启动10个周期 //同步头 if((324 < a.W) && (a.W < 353)) ;//检测同步信号1 else { TR0 = 0; TH0 = TL0 = 0; goto read_error; } //等待上升沿 while(!p_U2270B_OutPut); TR0 = 0; a.B.H = TH0; a.B.L = TL0; TH0 = TL0 = 0; TR0 = 1;//b.N1<<=8; if(a.B.L < 195);//0.5p else { TR0 = 0; TH0 = TL0 = 0; goto read_error; } //读0~7块的数据 for(j = 0;j < 28;j++) { //uchar i; for(i = 0;i < 16;i++)//8个位 { //等待下降沿的到来 while(p_U2270B_OutPut); TR0 = 0; a.B.H = TH0; a.B.L = TL0; TH0 = TL0 = 0; TR0 = 1; if(t2_max < a.W/*)&&(a.W < t2_max)*/)//1P { b.W >>= 2;//先左移再赋值 b.B.L += 0xc0; i++; } else if(t1_min < a.B.L/*)&&(a.B.L < t1_max)*/)//0.5p { b.W >>= 1; b.B.L += 0x80; } else { TR0 = 0; TH0 = TL0 = 0; goto read_error; } i++; while(!p_U2270B_OutPut);//上升 TR0 = 0; a.B.H = TH0; a.B.L = TL0; TH0 = TL0 = 0; TR0 = 1; if(t2_min < a.W/*)&&(a.W < t2_max)*/)//1P { b.W >>= 2; i++; } else if(t1_min < a.B.L/*a.W)&&(a.B.L < t1_max)*/)//0.5P //else if(!(a.W==0)) { b.W >>= 1; //temp+=0x00; //led_light1=0;led_light=1;delay_2(40000); } else { TR0 = 0; TH0 = TL0 = 0; goto read_error; } i++; } //取出奇位 DATA = b.B.L; BIT13 = BIT7; BIT12 = BIT5; BIT11 = BIT3; BIT10 = BIT1; DATA = b.B.H; BIT17 = BIT7; BIT16 = BIT5; BIT15 = BIT3; BIT14 = BIT1; bankdata[j] = DATA1; } read_ok = 1;//读卡完成了 read_error: _nop_(); } } /***************************************************/ void f_writecard(uchar x)//写卡 { p_U2270B_CFE = 1; delay_2(232); //>2.5ms //psw=0 standard write if (x == write_command0)//写密码:初始化密码 { uchar i; uchar data *data p; p = cominceptbuff; p_U2270B_CFE = 0; delay_2(31);//start gap>330us write_bit(1);//写操作码1:10 write_bit(0);//写操作码0 write_bit(0);//写锁定位0 for(i = 0;i < 35;i++) { write_bit(1);//写数据位1 } p_U2270B_CFE = 1; led_light1 = 0; led_light = 1; delay_2(40000);//测试使用 //write_block(cominceptbuff[4],p); p_U2270B_CFE = 1; bankdata[20] = cominceptbuff[0];//密码存入 bankdata[21] = cominceptbuff[1]; bankdata[22] = cominceptbuff[2]; bankdata[23] = cominceptbuff[3]; } else if (x == write_command1)//配置卡参数:初始化 { uchar data *data p; p = cominceptbuff; write_bit(1);//写操作码1:10 write_bit(0);//写操作码0 write_bit(0);//写锁定位0 write_block(cominceptbuff[4],p); p_U2270B_CFE= 1; } //psw=1 pssword mode else if(x == write_command2) //密码写数据 { uchar data*data p; p = &bankdata[24]; write_bit(1);//写操作码1:10 write_bit(0);//写操作码0 write_password(p);//发口令 write_bit(0);//写锁定位0 p = cominceptbuff; write_block(cominceptbuff[4],p);//写数据 } else if(x == write_command3)//aor //唤醒 { //cominceptbuff[1]操作码10 X xxxxxB uchar data *data p; p = cominceptbuff; write_bit(1);//10 write_bit(0); write_password(p);//密码 p_U2270B_CFE = 1;//此时数据不停的循环传出 } else //停止操作码 { write_bit(1);//11 write_bit(1); p_U2270B_CFE = 1; } p_U2270B_CFE = 1; delay_2(560);//5.6ms } /************************************/ void f_clearpassword()//清除密码 { uchar data *data p; uchar i,x; p = &bankdata[24];//原密码 p_U2270B_CFE = 0; delay_2(18);//start gap>150us //操作码10:10xxxxxxB write_bit(1); write_bit(0); for(x = 0;x < 4;x++)//发原密码 { DATA = *(p++); for(i = 0;i < 8;i++) { write_bit(BIT0); DATA >>= 1; } } write_bit(0);//锁定位0:0 p = &cominceptbuff[0]; write_block(0x00,p);//写新配置参数:pwd=0 //密码无效:即清除密码 DATA = 0x00;//停止操作码00000000B for(i = 0;i < 2;i++) { write_bit(BIT7); DATA <<= 1; } p_U2270B_CFE = 1; delay_2(560);//5.6ms } /*********************************/ void f_changepassword()//修改密码 { uchar data *data p; uchar i,x,addr; addr = 0x07;//block7 p = &Nkey_a[0];//原密码 DATA = 0x80;//操作码10:10xxxxxxB for(i = 0;i < 2;i++) { write_bit(BIT7); DATA <<= 1; } for(x = 0;x < 4;x++)//发原密码 { DATA = *(p++); for(i = 0;i < 8;i++) { write_bit(BIT7); DATA >>= 1; } } write_bit(0);//锁定位0:0 p = &cominceptbuff[0]; write_block(0x07,p);//写新密码 p_U2270B_CFE = 1; bankdata[24] = cominceptbuff[0];//密码存入 bankdata[25] = cominceptbuff[1]; bankdata[26] = cominceptbuff[2]; bankdata[27] = cominceptbuff[3]; DATA = 0x00;//停止操作码00000000B for(i = 0;i < 2;i++) { write_bit(BIT7); DATA <<= 1; } p_U2270B_CFE = 1; delay_2(560);//5.6ms } /***************************子函数***********************************/ void write_bit(bit x)//写一位 { if(x) { p_U2270B_CFE = 1; delay_2(32);//448*11.0592/120=42延时448us p_U2270B_CFE = 0; delay_2(28);//280*11.0592/120=26写1 } else { p_U2270B_CFE = 1; delay_2(92);//192*11.0592/120=18 p_U2270B_CFE = 0; delay_2(28);//280*11.0592/120=26写0 } } /*******************写一个block*******************/ void write_block(uchar addr,uchar data *data p) { uchar i,j; for(i = 0;i < 4;i++)//block0数据 { DATA = *(p++); for(j = 0;j < 8;j++) { write_bit(BIT0); DATA >>= 1; } } DATA = addr <<= 5;//0地址 for(i = 0;i < 3;i++) { write_bit(BIT7); DATA <<= 1; } } /*************************************************/ void write_password(uchar data *data p) { uchar i,j; for(i = 0;i < 4;i++)// { DATA = *(p++); for(j = 0;j < 8;j++) { write_bit(BIT0); DATA >>= 1; } } } /*************************************************/ void main() { initial(); TI = RI = 0; ES = 1; EA = 1; delay_2(28); //f_readcard(); while(1) { f_readcard(); //读卡 f_writecard(command1); //写卡 f_clearpassword(); //清除密码 f_changepassword(); //修改密码 } }

标签： 12345

上传时间： 2017-10-20

上传用户：my_lcs
java入门编程合集

题目：古典问题：有一对兔子，从出生后第3个月起每个月都生一对兔子，小兔子长到第三个月后每个月又生一对兔子，假如兔子都不死，问每个月的兔子总数为多少？ //这是一个菲波拉契数列问题 public class lianxi01 { public static void main(String[] args) { System.out.println("第1个月的兔子对数: 1"); System.out.println("第2个月的兔子对数: 1"); int f1 = 1, f2 = 1, f, M=24; for(int i=3; i<=M; i++) { f = f2; f2 = f1 + f2; f1 = f; System.out.println("第" + i +"个月的兔子对数: "+f2); } } } 【程序2】题目：判断101-200之间有多少个素数，并输出所有素数。程序分析：判断素数的方法：用一个数分别去除2到sqrt(这个数)，如果能被整除，则表明此数不是素数，反之是素数。 public class lianxi02 { public static void main(String[] args) { int count = 0; for(int i=101; i<200; i+=2) { boolean b = false; for(int j=2; j<=Math.sqrt(i); j++) { if(i % j == 0) { b = false; break; } else { b = true; } } if(b == true) {count ++;System.out.println(i );} } System.out.println( "素数个数是: " + count); } } 【程序3】题目：打印出所有的 "水仙花数 "，所谓 "水仙花数 "是指一个三位数，其各位数字立方和等于该数本身。例如：153是一个 "水仙花数 "，因为153=1的三次方＋5的三次方＋3的三次方。 public class lianxi03 { public static void main(String[] args) { int b1, b2, b3;

标签： java 编程

上传时间： 2017-12-24

上传用户：Ariza
学生成绩管理

#include<stdio.h> #include<windows.h> int xuanxiang; int studentcount; int banjihao[100]; int xueqihao[100][10]; char xm[100][100]; int xuehao[100][10]; int score[100][3]; int yuwen; int shuxue[000]; int yingyu[100]; int c[100]; int p; char x[1000][100]="",y[100][100]="";/*x学院 y专业 z班级*/ int z[100]; main() { void input(); void inputsc(); void alter(); void scbybannji(); printf("--------学生成绩管理-----\n"); printf("请按相应数字键来实现相应功能\n"); printf("1.录入学生信息 2.录入学生成绩 3.修改学生成绩\n"); printf("4.查询学生成绩 5.不及格科目及名单 6.按班级输出学生成绩单\n"); printf("请输入你要实现的功能所对应的数字:"); scanf("%d",&xuanxiang); system("cls"); getchar(); switch (xuanxiang) { case 1:input(); case 2:inputsc(); case 3:alter(); /*case 4:select score(); case 5:bujigekemujimingdan();*/ case 6:scbybanji; } } void input() { int i; printf("请输入你的学院名称:"); gets(x); printf("请输入你的专业名称:"); gets(y); printf("请输入你的班级号:"); scanf("%d",&z); printf("请输入你们一个班有几个人:"); scanf("%d",&p); system("cls"); for(i=0;i<p;i++) { printf("请输入第%d个学生的学号:",i+1); scanf("%d",xuehao[i]); getchar(); printf("请输入第%d个学生的姓名:",i+1); gets(xm[i]); system("cls"); } printf("您已经录入完毕您的班级所有学生的信息!\n"); printf("您的班级为%s%s%s\n",x,y,z); /*alter(p);*/ } void inputsc() { int i; for(i=0;i<p;i++) { printf("\n"); printf("--------------------------------------------------------------------------------\n\n"); printf("\t\t\t\t录入学生的成绩\n\n\n"); printf("--------------------------------------------------------------------------------\n\n"); printf("\t\t\t\t%s\n",xm[i]); printf("\n"); printf("\t\t\t\t数学:"); scanf("%d",&shuxue[i]); printf("\n"); getchar(); printf("\t\t\t\t英语:"); scanf("%d",&yingyu[i]); printf("\n"); getchar(); printf("\t\t\t\tc语言:"); scanf("%d",&c[i]); system("cls"); } } void alter() { int i;/*循环变量*/ int m[10000];/*要查询的学号*/ int b;/*修改后的成绩*/ char kemu[20]=""; printf("请输入你要修改的学生的学号"); scanf("%d",&m); for (i=0;i<p;i++) { if (m==xuehao[i]) { printf("%s的数学成绩为%d,英语成绩为%d,c语言成绩为%d,xm[i],shuxue[i],yingyu[i],c[i]"); printf("请输入你想修改的科目");} } gets(kemu); getchar(); if (kemu=="数学"); { scanf("%d",&b); shuxue[i]=b;} if (kemu=="英语"); { scanf("%d",&b); yingyu[i]=b;} if (kemu=="c语言"); { scanf("%d",&b); c[i]=b; } printf("%s的数学成绩为%d,英语成绩为%d,c语言成绩为%d,xm[i],shuxue[i],yingyu[i],c[i]"); } void scbybannji() { int i; char zyname[20]; int bjnumber; printf("请输入你的专业名称"); scanf("%s",&zyname); printf("请输入你的班级号"); scanf("%d",&bjnumber); for (i=0;i<p;i++) { if (zyname==y[i]); if (bjnumber==z[i]); printf("专业名称%s班级号%d数学成绩%d英语成绩%dc语言成绩%d，y[i],z[i],shuxue[i],yingyu[i],c[i]"); } }

标签： c语言

上传时间： 2018-06-08

上传用户：2369043090
（网盘）300本Python电子书

|- 数据科学速查表 - 0 B|- 迁移学习实战 - 0 B|- 零起点Python机器学习快速入门 - 0 B|- 《深度学习入门：基于Python的理论与实现》高清中文版PDF+源代码 - 0 B|- 《Python生物信息学数据管理》中文版PDF+英文版PDF+源代码 - 0 B|- 《Python深度学习》2018中文版pdf+英文版pdf+源代码 - 0 B|- 《Python编程：从入门到实践》中文版+源代码 - 0 B|- stanford machine learning - 0 B|- Python语言程序设计2018版电子教案 - 0 B|- Python网络编程第三版（原版+中文版+源代码） - 0 B|- Python机器学习实践指南（中文版带书签）、原书代码、数据集 - 0 B|- python官方文档 - 0 B|- Python编程(第4版套装上下册) - 0 B|- PyQt5快速开发与实战（pdf+源码） - 0 B|- linux - 0 B|- 征服PYTHON-语言基础与典型应用.pdf - 67.40 MB|- 与孩子一起学编程_中文版_详细书签.pdf - 69.10 MB|- 用Python做科学计算.pdf - 6.10 MB|- 用Python写网络爬虫.pdf - 9.90 MB|- 用Python进行自然语言处理(中文翻译NLTK).pdf - 4.40 MB|- 像计算机科学家那样思考 Python中文版第二版.pdf - 712.00 kB|- 网络爬虫－Python和数据分析.pdf - 6.90 MB|- 图解机器学习.pdf - 59.40 MB|- 凸优化.pdf - 5.70 MB|- 数据挖掘导论.pdf - 2.50 MB|- 数据科学入门.pdf - 13.30 MB|- 数据结构与算法__Python语言描述_裘宗燕编著_北京：机械工业出版社_，_2016.01_P346.pdf - 74.30 MB|- 神经网络与深度学习.pdf - 92.60 MB|- 深入Python3...

标签： python

上传时间： 2022-06-06

上传用户：
VIP专区-嵌入式/单片机编程源码精选合集系列（17）

VIP专区-嵌入式/单片机编程源码精选合集系列（17）资源包含以下内容：1. 两轴云台控制程序.2. 全球定位系统数据提取.3. 车载GPS智能终端的设计与实现.4. Dsc8610:-------------OV8610+OV681+OV651数码相机源程序(2500.A.D公司的X51.EXE).5. header define of EZ-LIB.6. the sourse of EZUSB (for c ).7. LCD显示源程序.8. HT6221,PT2221红外编码遥控器处理模块VER1.0 作　者: David Wang Email: wy94081@sina.com.cn.9. 提取单个汉字字模程序.10. C8051F02x Firmware Updating Code.11. PDIUSBD12 应用层演示软件（DELPHI）.12. motorala JL8程序代码.13. 基于snd1c芯片的mp3播放器源代码.14. 基于snd1c芯片的mp3播放器源代码（硬盘版本的）.15. 基于snd1c芯片的mp3播放器源代码（原理图）.16. 16进制字符串和16进制本身相互转换.17. 韦根协议实现和用io模拟串口实现.18. mm36sb020存储器读写.19. DS1302时间和RAM的读写.20. Windows CE Nand Flsh 驱动.21. 一个msp430的os.22. 此程序为EVC编写的MIS系统.23. usb鼠标设计完全实例.24. 用并口模拟I2C总线的源码.25. pdiusbd12中文资料.26. 用C33 STAR 开发板构成GPS定位系统.27. lpc932芯片用于modbus通讯的范例.28. 液晶t6963驱动芯片程序范例.29. RS232_RS485通讯接口软硬件资料.30. PLC程序,汇编写的工业控制用的.31. TCP/IP源码.32. 日本工业界的嵌入式系统标准。60%以上的日本嵌入式产品依此标准而制造。.33. AD7705的读写驱动.34. 接口芯片8155的驱动程序.35. LED显示驱动芯片的驱动程序.36. 5位LED显示驱动芯片14498的显示驱动.37. MODBUS驱动.38. 39sf040驱动.39. tms320vc33烧写flash程序.40. 串口调试助手,调RS232,RS485必备武器.

标签： 传动标准应用手册

上传时间： 2013-07-09

上传用户：eeworm
21世纪大学新型参考教材系列集成电路B 荒井

21世纪大学新型参考教材系列集成电路B 荒井

标签： 大学教材集成电路

上传时间： 2013-04-15

上传用户：eeworm