PRODUCT DESCRIPTION The AD810 is a composite and HDTV compatible, current feedback, video operational amplifier, ideal for use in systems such as multimedia, digital tape recorders and video cameras. The 0.1 dB flatness specification at bandwidth of 30 MHz (G = +2) and the differential gain and phase of 0.02% and 0.04° (NTSC) make the AD810 ideal for any broadcast quality video system. All these specifications are under load conditions of 150 Ω (one 75 Ω back terminated cable). The AD810 is ideal for power sensitive applications such as video cameras, offering a low power supply current of 8.0 mA max. The disable feature reduces the power supply current to only 2.1 mA, while the amplifier is not in use, to conserve power. Furthermore the AD810 is specified over a power supply range of ±5 V to ±15 V.
上传时间： 2020-04-19
上传用户：su1254
Agilent 34401A Service Guide.pdfIEC Measurement Category II includes electrical devices connected to mains at an outlet on a branch circuit. Such devices include most small appliances, test equipment, and other devices that plug into a branch outlet or socket. The 34401A may be used to make measurements with the HI and LO inputs connected to mains in such devices, or to the branch outlet itself (up to 300 VAC). However, the 34401A may not be used with its HI and LO inputs connected to mains in permanently installed electrical devices such as the main circuit-breaker panel, sub-panel disconnect boxes, or permanently wired motors. Such devices and circuits are subject to overvoltages that may exceed the protection limits of the 34401A. Note: Voltages above 300 VAC may be measured only in circuits that are isolated from mains. However, transient overvoltages are also present on circuits that are isolated from mains. The Agilent 34401A are designed to safely withstand occasional transient overvoltages up to 2500 Vpk. Do not use this equipment to measure circuits where transient overvoltages could exceed this level. Additional Notices Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC This product complies with the WEEE Directive (2002/96/EC) marking requirement. The affixed product label (see below) indicates that you must not discard this electrical/electronic product in domestic household waste. Product Category: With reference to the equipment types in the WEEE directive Annex 1, this product is classified as a "Monitoring and Control instrumentation" product. Do not dispose in domestic household waste. To return unwanted products, contact your local Agilent office, or see www.agilent.com/environment/product for more information. Agilent 34138A Test Lead Set The Agilent 34401A is compatible with the Agilent 34138A Test Lead Set described below. Test Lead Ratings Test Leads - 1000V, 15A Fine Tip Probe Attachments - 300V, 3A Mini Grabber Attachment - 300V, 3A SMT Grabber Attachments - 300V, 3A Operation The Fine Tip, Mini Grabber, and SMT Grabber attachments plug onto the probe end of the Test Leads. Maintenance If any portion of the Test Lead Set is worn or damaged, do not use. Replace with a new Agilent 3413
标签： agilent
上传时间： 2022-02-20
上传用户：
CH341系列编程器芯片usb转串口Altium Designer AD原理图库元件库CSV text has been written to file : 1.9 - CH341系列编程器芯片.csvLibrary Component Count : 56Name Description----------------------------------------------------------------------------------------------------CH311Q PC debug port monitorCH331T Mini USB Disk ControllerCH340G CH340H USB to TTL Serial / UART, USB to IrDACH340T USB to TTL Serial / UART, USB to IrDACH340R USB to IrDA, USB to RS232 SerialCH340S_P USB to Print Port / ParallelCH340S_S USB to TTL Serial / UART, pin compatible with CH341CH341A_S USB to TTL Serial / UART / I2C/IICCH341S_P USB to Print Port / ParallelCH341A_P USB to Print Port / ParallelCH341S_S USB to TTL Serial / UARTCH341S_X USB to EPP Parallel / SPI / I2C/IICCH341A_X USB to EPP Parallel / SPI / I2C/IICCH341T USB to TTL Serial / UART / I2C/IICCH345T USB to MidiCH352L_M PCI to 8255 mode 2 Parallel for MCU and 16C550 UART / IrDACH352L_P PCI to Print Port / Parallel and 16C550 UART / IrDACH352L_S PCI to Dual 16C550 UART, TTL Serial*2 / IrDA*1CH362L PCI Device / Slave only for RAM / Expansion ROMCH364F Member of CH364 chipsetsCH364P PCI Device / Slave Embedded Flash ROM, for Expansion ROMCH365P PCI Device / Slave, for I/O port or RAM / ROMCH372T USB Device / Slave for MCU, ParallelCH372A USB Device / Slave for MCU, ParallelCH372V USB Device / Slave for MCU, ParallelCH374S USB Host & Device / Slave for MCU, parallel / SPICH374T USB Host & Device / Slave for MCU, parallel / SPICH375S USB Host & Device / Slave for MCU, parallel / UART SerialCH375A USB Host & Device / Slave for MCU, parallel / UART SerialCH375V USB Host & Device / Slave for MCU, parallel / UART SerialCH411G FDC MFM encode and decodeCH421A Dual port bufferCH421S Dual port bufferCH423D I2C/IIC I/O expander, 16 GPO + 8 GPIO, 128 LEDs DriveCH423S I2C/IIC I/O expander, 16 GPO + 8 GPIO, 128 LEDs DriveCH423D_D I2C/IIC I/O expander, 16 GPO + 8 GPIO, 128 LEDs DriveCH423S_D I2C/IIC I/O expander, 16 GPO + 8 GPIO, 128 LEDs DriveCH423G I2C/IIC I/O expander, 6 GPO + 5 GPIOCH432Q Dual 16C550 UART with IrDA, parallel / SPICH432T SPI Dual 16C550 UART with IrDACH450K 6 Digits / 48 LEDs Drive & 8x6 Keyboard, I2C/IICCH450H 6 Digits / 48 LEDs Drive & 8x6 Keyboard, I2C/IICCH450L 8 Digits / 64 LEDs Drive & 8x8 Keyboard, I2C/IICCH451L 8 Digits / 64 LEDs Drive & 8x8 Keyboard, 4 Wire Interface, SPICH451S 8 Digits / 64 LEDs Drive & 8x8 Keyboard, 4 Wire Interface, SPICH451D 8 Digits / 64 LEDs Drive & 8x8 Keyboard, 4 Wire Interface, SPICH452L_2 8 Digits / 64 LEDs Drive & 8x8 Keyboard, I2C/IICCH452L_4 8 Digits / 64 LEDs Drive & 8x8 Keyboard, 4 Wire Interface, SPICH452S_2 8 Digits / 64 LEDs Drive & 8x8 Keyboard, I2C/IICCH452S_4 8 Digits / 64 LEDs Drive & 8x8 Keyboard, 4 Wire Interface, SPICH453S 16 Digits / 128 LEDs Drive, I2C/IICCH453D 16 Digits / 128 LEDs Drive, I2C/IICPCI 32Bit PCI Bus, simple / short cardPCI32 32Bit PCI BusUSB USB Port
标签： ch341 编程芯片 usb 串口 altium designer
上传时间： 2022-03-13
上传用户：
该步进电机驱动器又称为EasyDriver，EasyDriver能够为两级步进电机提供大约每相750mA（两极一共1.5A）的驱动。它默认设置为8步细分模式（所以如果你的电机是每圈200步，你使用EasyDriver时默认为每圈1600步），更多细分模式可以通过将MS1或MS2两个接脚接地进行设置。这是一种基于Allegro A3967驱动芯片的细分断路器。对于此设计的完整规格，请查阅A3967的参数表。它的最大每相电流从150mA到750mA。可以采用的最大驱动电压大概是30V，其中包括板载5V的调压器，所以只需要一个电源。质优价廉，这玩意儿只要十几美元，比你自己制作电路板更便宜。步进电机驱动器设计特色：· A3967 Microstepping Driver· MS1 and MS2 pins broken out to change microstepping resolution to full, half, quarter and eighth steps (defaults to eighth)· Compatible with 4, 6, and 8 wire stepper motors of any voltage· Adjustable current control from 150mA/phase to 700mA/phase· Power supply range from 6V to 30V. The higher the voltage, the higher the torque at high speeds
上传时间： 2022-04-27
上传用户：
基于单片机的智能计算器.zip - 1.00MB基于单片机的温度湿度采集系统.zip基于单片机的室内空气净化系统.zip - 85.42MB单片机最小系统 - 24.31MB2. 51单片机介绍 - 186.50KB51单片机介绍（一）.avi - 30.57MB51单片机介绍.ppt单片机最小系统.ppt - 393.09KB单片机最小系统.avi - 64.72KB......
标签： hc6800
上传时间： 2022-05-26
上传用户：xsr1983
2.5.2 绘制串行显示驱动器PS7219及单片机的SPI接口电路.avi - 19.68MB5.16.1 PS7219及单片机的SPI接口电路板设计.avi - 25.69MB23 单片机试验板电路图设计_.avi - 45.08MB06 单片机系统PCB的布局设计_.avi - 49.01MB01 操作实例——单片机原理图_.avi - 133.09MB8.5.1 单片机系统PCB的布局设计.mp4 - 49.01MB单片机实验板原理图.avi - 15.55MB单片机试验板PCB设计.avi - 36.47MBAD17视频教程......
标签： altium designer
上传时间： 2022-05-26
上传用户：aben
5 Scratch2.0案例实战4 Scratch2.0视频教程3 Scratch1.4教程三2 Scratch1.4教程二1 Scratch1.4教程一网盘免费扩容和转存方法.doc - 357.00KB如何用百度云下载百度网盘的文件.doc - 484.50KBScratch2.0.zip - 47.33MB6三种语句结构.avi - 54.34MB......
上传时间： 2022-05-26
上传用户：
第8讲：STC单片机存储器空间.avi - 137.97MB第7讲：STC单片机SFR.avi - 168.07MB第6讲：STC单片机CPU内核.avi - 101.45MB第3讲：STC单片机概述.avi - 242.18MB第2讲：单片机基础.avi - 68.76MB第1讲：STC单片机学习导论.avi - 173.75MB何宾STC视频第5讲：数值的转换.avi - 137.04MB第4讲：数值表示.avi - 71.25MB......
标签： stc
上传时间： 2022-05-27
上传用户：qdxqdxqdxqdx
其它原创视频第72讲 视频教程说明及实战书籍推荐.avi - 99.51MB第71讲 怎样加密PCB文件.avi - 17.65MB第70讲 怎样生成坐标文件.avi - 36.32MB第69讲 怎样利用gerber层检查视图.avi - 16.50MB第68讲 出光绘文件：三.avi - 75.70MB第67讲 出光绘文件：二.avi - 72.89MB第66讲 出光绘文件：一.avi - 52.13MB第65讲 调整位号丝印.avi - 71.91MB第64讲 删除死铜.avi - 17.68MB第63讲 怎样合并铜皮.avi - 40.67MB第62讲 Shape void操作演示.avi - 38.01MB第61讲 修改铜皮轮廓及提高铜皮优先级.avi - 51.99MB第60讲 Shape的层间复制及其换层.avi - 54.76MB
上传时间： 2022-06-05
上传用户：
试看——公务卡管理系统.avi - 54.88MB试看——分析频谱相位.avi - 20.95MB课程介绍.txt - 48bytes获取密码联系微信193220303.txt - 66bytes4、LabVIEW接口通讯发布教程8.5小时.rar - 789.54MB3、LabVIEW 2015实例教程4.5小时.rar - 934.72MB2、LabVIEW进阶教程8小时.rar - 798.63MB1、LabVIEW入门教程8.5小时.rar - 887.24MB
标签： labview
上传时间： 2022-06-05
上传用户：
