This books presents the research work of COST 273 Towards Mobile Broadband Multimedia Networks, hence, it reports on the work performed and on the results achieved within the project by its participants. The material presented here corresponds to the results obtained in four years of collaborative work by more than 350 researchers from 137 institutions (universities, operators, manufacturers, regulators, independent laboratories and others – a full list is provided in Appendix B) belonging to 29 countries (mainly European, but also from Asia and North America) in the area of mobileradio. Theobjectiveofpublishingtheseresultsasabookisessentiallytomakethemavailable to an audience wider than the project. In fact, it just follows a ‘tradition’ of previous COST Actions in this area of telecommunications, i.e. COST 207, 231 and 259.
标签： Multimedia Techniques Broadband Networks Mobile
上传时间： 2020-05-30
上传用户：shancjb
The family of recent wireless standards included the optional employment of Multiple-Input Multiple-Output(MIMO)techniques.This was motivatedby the observationaccordingto the classic Shannon–Hartley law that the achievable channel capacity increases logarithmically with the transmit power. In contrast, the MIMO capacity increases linearly with the number of transmit antennas, provided that the number of receive antennas is equal to the number of transmit antennas. With the further proviso that the total transmit power is increased in proportion to the number of transmit antennas, a linear capacity increase is achieved upon increasing the transmit power, which justifies the spectacular success of MIMO systems.
标签： Multi-Functional Systems MIMO
上传时间： 2020-05-31
上传用户：shancjb
The first edition of this book was published in 1992. Nine years later it had become clear that a second edition was required because of the rapidly changing nature of telecommunication. In 1992, the Internet was in existence but it was not the household word that it is in the year 2001. Cellular telephones were also in use but they had not yet achieved the popularity that they enjoy today. In the current edition, Chapter 1 has been revised to include a section on the Internet. Chapter 10 is new and it covers the facsimile machine; I had overlooked this important tele- communication device in the first edition. Chapter 11 is also new and it describes the pager, the cordless telephone and the cellular telephone system. These are examples of a growing trend in telecommunications to go ‘‘wireless’’.
标签： Telecommunication Circuit Design 2nd
上传时间： 2020-06-01
上传用户：shancjb
Radio frequency identification (RFID) is a type of automatic identification systems which has gained popularity in recent years for being fast and reliable in keeping track of the individual objects. In RFID systems, contactless object identification is achieved using radio signals without the need for physical contact as the case with other existing identification technologies such as barcodes. Therefore, a huge number of items can be identified in a short amount of time with high reliability and low cost which makes the RFID technology very attractive for a wide range of applications such as supply chain management, e-health, monitoring humans, pets, animals, and many other objects, toll control, and electrical tagging. Furthermore, RFID technology eliminates the human error and reduces the total cost of the products.
上传时间： 2020-06-08
上传用户：shancjb
基于TMS320F2812 光伏并网发电模拟装置PROTEL设计原理图+PCB+软件源码+WORD论文文档,硬件采用2层板设计，PROTEL99SE 设计的工程文件，包括完整的原理图和PCB文件，可以做为你的学习设计参考。 摘要：本文实现了一个基于TMS320F2812 DSP芯片的光伏并网发电模拟装置，采用直流稳压源和滑动变阻器来模拟光伏电池。通过TMS320F2812 DSP芯片ADC模块实时采样模拟电网电压的正弦参考信号、光伏电池输出电压、负载电压电流反馈信号等。经过数据处理后，用PWM模块产生实时的SPWM 波，控制MOSFET逆变全桥输出正弦波。本文用PI控制算法实现了输出信号对给定模拟电网电压的正弦参考信号的频率和相位跟踪，用恒定电压法实现了光伏电池最大功率点跟踪（MPPT），从而达到模拟并网的效果。另外本装置还实现了光伏电池输出欠压、负载过流保护功能以及光伏电池输出欠压、过流保护自恢复功能、声光报警功能、孤岛效应的检测、保护与自恢复功能。系统测试结果表明本设计完全满定设计要求。关键词：光伏并网，MPPT，DSP Photovoltaic Grid-connected generation simulator Zhangyuxin，Tantiancheng，Xiewuyang(College of Electrical Engineering, Chongqing University)Abstract: This paper presents a photovoltaic grid-connected generation simulator which is based on TMS320F2812 DSP, with a DC voltage source and a variable resistor to simulate the characteristic of photovoltaic cells. We use the internal AD converter to real-time sampling the referenced grid voltage signal, outputting voltage of photovoltaic, feedback outputting voltage and current signal. The PWM module generates SVPWM according to the calculation of the real-time sampling data, to control the full MOSFET inverter bridge output sine wave. We realized that the output voltage of the simulator can track the frequency and phase of the referenced grid voltage with PI regulation, and the maximum photovoltaic power tracking with constant voltage regulation, thereby achieved the purpose of grid-connected simulation. Additionally, this device has the over-voltage and over-current protection, audible and visual alarm, islanding detecting and protection, and it can recover automatically. The testing shows that our design is feasible.Keywords: Photovoltaic Grid-connected，MPPT，DSP 目录引言 11. 方案论证 11.1. 总体介绍 11.2. 光伏电池模拟装置 11.3. DC-AC逆变桥 11.4. MOSFET驱动电路方案 21.5. 逆变电路的变频控制方案 22. 理论分析与计算 22.1. SPWM产生 22.1.1. 规则采样法 22.1.2. SPWM 脉冲的计算公式 32.1.3. SPWM 脉冲计算公式中的参数计算 32.1.4. TMS320F2812 DSP控制器的事件管理单元 42.1.5. 软件设计方法 62.2. MPPT的控制方法与参数计算 72.3. 同频、同相的控制方法和参数计算 8
标签： tms320f2812 光伏 并网发电 模拟 protel pcb
上传时间： 2021-11-02
上传用户：
The PW2163 is a high efficiency 500 kHz synchronous step-down DC-DC converter capable ofdelivering 3A current. The PW2163 operates over a wide input voltage range from 4.5V to 18V andintegrates main switch and synchronous switch with very low RDS(ON) to minimize the conductionloss. Low output voltage ripple and small external inductor and capacitor sizes are achieved with 500kHz switching frequency. It adopts the instant PWM architecture to achieve fast transient responsesfor high step down applications
标签： pw2163
上传时间： 2022-02-11
上传用户：
Abstract: A sliding mode observer and fractional-order phase-locked loop (FO-PLL) method is proposed for the sensorless speed control of a permanent magnet synchronous motor (PMSM).The saturation function is adopted in order to reduce the chattering phenomenon caused by the sliding mode observer. In this proposed FO-PLL, method, a regulable fractional order r is involved, which means that the FO-PLL provides an extra degree of freedom. In fact, the conventional phase-locked loop (PLL) applied in sensorless PMSM control can be seen as a special case of the proposed FO-PLL. By selecting a proper fractional order r a better performance may be achieved. The computer simulation results demonstrate the effectiveness of the proposed method.Key words: fractional calculus; fractional order phase-locked loop; sensorless control; sliding mode observer; permanent magnet synchronous motor; speed controll
上传时间： 2022-06-18
上传用户：
DescriptionThe IMX385LQR-C is a diagonal 8.35 mm (Type 1/2) CMOS active pixel type solid-state image sensor with a squarepixel array and 2.13 M effective pixels. This chip operates with analog 3.3 V, digital 1.2 V, and interface 1.8 V triplepower supply, and has low power consumption. High sensitivity, low dark current and no smear are achieved throughthe adoption of R, G and B primary color mosaic filters. This chip features an electronic shutter with variablecharge-integration time.(Applications: Surveillance cameras)
标签： CMOS传感器 IMX385LQR-C
上传时间： 2022-06-18
上传用户：
sony CMOS传感器datasheet，IMX178LQJ-C_Data_SheetDescriptionThe IMX178LQJ-C is a diagonal 8.92 mm (Type 1/1.8) CMOS active pixel type image sensor with a square pixelarray and 6.44 M effective pixels. This chip operates with analog 2.9 V, digital 1.2 V and interface 1.8 V triple powersupply, and has low power consumption.High sensitivity, low dark current and no smear are achieved through the adoption of R, G and B primary colormosaic filters.This chip features an electronic shutter with variable charge-integration time.(Applications: Surveillance cameras, FA cameras, Industrial cameras)
标签： CMOS传感器 IMX178LQJ-C
上传时间： 2022-06-18
上传用户：
