Atheros无线芯片AR-6000系列wince 6驱动源代码(这东西我也没用过别问我,我是搜别的wince资源搜到的) AR6K SDIO support. Requires firmware 1.1 on SD13 cards. readme: Atheros Communications AR6001 WLAN Driver for SDIO installation Read Me March 26,2007 (based on k14 fw1.1) Windows CE Embedded CE 6.0 driver installation. 1. Unzip the installation file onto your system (called installation directory below) 2. Create an OS design or open an existing OS design in Platform Builder 6.0. a. The OS must support the SD bus driver and have an SD Host Controller driver (add these from Catalog Items). b. Run image size should be set to allow greater than 32MB. 3. a. From the Project menu select Add Existing Subproject... b. select AR6K_DRV.pbxml c. select open This should create a subproject within your OS Design project for the AR6K_DRV driver. 4. Build the solution. 转自Tony嵌入式,原文地址：http://www.cevx.com/bbs/dispbbs.asp?boardID=4&ID=11762&page=1
标签： wince Requires firmware Atheros
上传时间： 2014-11-11
上传用户：bibirnovis
This utility has two views: (a) one view that will show you the entire PnP enumeration tree of device objects, including relationships among objects and all the device s reported PnP characteristics, and (b) a second view that shows you the device objects created, sorted by driver name. There is nothing like this utility available anywhere else.
标签： enumeration utility entire devic
上传时间： 2013-12-17
上传用户：zjf3110
/* ********************************************************************************************************* * uC/TCP-IP V2 * The Embedded TCP/IP Suite * * (c) Copyright 2003-2010; Micrium, Inc.; Weston, FL * * All rights reserved. Protected by international copyright laws. * * uC/TCP-IP is provided in source form to registered licensees ONLY. It is * illegal to distribute this source code to any third party unless you receive * written permission by an authorized Micrium representative. Knowledge of * the source code may NOT be used to develop a similar product. * * Please help us continue to provide the Embedded community with the finest * software available. Your honesty is greatly appreciated. * * You can contact us at www.micrium.com. ********************************************************************************************************* */ /* ********************************************************************************************************* * * NETWORK TCP LAYER * (TRANSMISSION CONTROL PROTOCOL) * * Filename : net_tcp.h * Version : V2.10 * Programmer(s) : ITJ ********************************************************************************************************* * Note(s) : (1) Supports Transmission Control Protocol as described in RFC #793 with the following * restrictions/constraints : * * (a) TCP Security & Precedence NOT supported RFC # 793, Section 3.6 * * (b) TCP Urgent Data NOT supported RFC # 793, Section 3.7 * 'The Communication of * Urgent Information' * * (c) The following TCP options NOT supported : * * (1) Window Scale RFC #1072, Section 2 * RFC #1323, Section 2 * (2) Selective Acknowledgement (SACK) RFC #1072, Section 3 * RFC #2018 * RFC #2883 * (3) TCP Echo RFC #1072, Section 4 * (4) Timestamp RFC #1323, Section 3.2 * (5) Protection Against Wrapped Sequences (PAWS) RFC #1323, Section 4 * * (d) #### IP-Options-to-TCP-Connection RFC #1122, Section 4.2.3.8 * Handling NOT supported * * (e) #### ICMP-Error-Message-to-TCP-Connection RFC #1122, Section 4.2.3.9 * Handling NOT currently supported * * (2) TCP Layer assumes/requires Network Socket Layer (see 'net_sock.h MODULE Note #1a2'). ********************************************************************************************************* */ /*$PAGE*/ /* ********************************************************************************************************* * MODULE * * Note(s) : (1) TCP Layer module is NOT required for UDP-to-Application API configuration. * * See also 'net_cfg.h TRANSPORT LAYER CONFIGURATION' * & 'net_cfg.h USER DATAGRAM PROTOCOL LAYER CONFIGURATION'. * * See also 'net_tcp.h Note #2'. * * (2) The following TCP-module-present configuration value MUST be pre-#define'd in * 'net_cfg_net.h' PRIOR to all other network modules that require TCP Layer * configuration (see 'net_cfg_net.h TCP LAYER CONFIGURATION Note #2b') : * * NET_TCP_MODULE_PRESENT ********************************************************************************************************* */ #ifdef NET_TCP_MODULE_PRESENT /* See Note #2. */ /* ********************************************************************************************************* * EXTERNS ********************************************************************************************************* */ #if ((defined(NET_TCP_MODULE)) && \ (defined(NET_GLOBALS_EXT))) #define NET_TCP_EXT #else #define NET_TCP_EXT extern #endif /*$PAGE*/ /* ********************************************************************************************************* * DEFINES ********************************************************************************************************* */ /* ********************************************************************************************************* * TCP HEADER DEFINES * * Note(s) : (1) The following TCP value MUST be pre-#define'd in 'net_def.h' PRIOR to 'net_buf.h' so that * the Network Buffer Module can configure maximum buffer header size (see 'net_def.h TCP * LAYER DEFINES' & 'net_buf.h NETWORK BUFFER INDEX & SIZE DEFINES Note #1') : * * (a) NET_TCP_HDR_SIZE_MAX 60 (NET_TCP_HDR_LEN_MAX * * NET_TCP_HDR_LEN_WORD_SIZE) * * (2) Urgent pointer & data NOT supported (see 'net_tcp.h Note #1b'). ********************************************************************************************************* */ #define NET_TCP_HDR_LEN_MASK 0xF000u #define NET_TCP_HDR_LEN_SHIFT 12u #define NET_TCP_HDR_LEN_NONE 0u #define NET_TCP_HDR_LEN_MIN 5u #define NET_TCP_HDR_LEN_MAX 15u #define NET_TCP_HDR_LEN_WORD_SIZE CPU_WORD_SIZE_32 #define NET_TCP_HDR_SIZE_MIN (NET_TCP_HDR_LEN_MIN * NET_TCP_HDR_LEN_WORD_SIZE) #if 0 /* See Note #1a. */ #define NET_TCP_HDR_SIZE_MAX (NET_TCP_HDR_LEN_MAX * NET_TCP_HDR_LEN_WORD_SIZE) #endif #define NET_TCP_HDR_SIZE_TOT_MIN (NET_IP_HDR_SIZE_TOT_MIN + NET_TCP_HDR_SIZE_MIN) #define NET_TCP_HDR_SIZE_TOT_MAX (NET_IP_HDR_SIZE_TOT_MAX + NET_TCP_HDR_SIZE_MAX) #define NET_TCP_PSEUDO_HDR_SIZE 12u /* = sizeof(NET_TCP_PSEUDO_HDR) */ #define NET_TCP_PORT_NBR_RESERVED NET_PORT_NBR_RESERVED #define NET_TCP_PORT_NBR_NONE NET_TCP_PORT_NBR_RESERVED #define NET_TCP_HDR_URG_PTR_NONE 0x0000u /* See Note #2. */ /*$PAGE*/ /* ********************************************************************************************************* * TCP HEADER FLAG DEFINES * * Note(s) : (1) See 'TCP HEADER Note #2' for flag fields. * * (2) Urgent pointer & data NOT supported (see 'net_tcp.h Note #1b'). ********************************************************************************************************* */ #define NET_TCP_HDR_FLAG_MASK 0x0FFFu #define NET_TCP_HDR_FLAG_NONE DEF_BIT_NONE #define NET_TCP_HDR_FLAG_RESERVED 0x0FE0u /* MUST be '0'. */ #define NET_TCP_HDR_FLAG_URGENT DEF_BIT_05 /* See Note #2. */ #define NET_TCP_HDR_FLAG_ACK DEF_BIT_04 #define NET_TCP_HDR_FLAG_PUSH DEF_BIT_03 #define NET_TCP_HDR_FLAG_RESET DEF_BIT_02 #define NET_TCP_HDR_FLAG_SYNC DEF_BIT_01 #define NET_TCP_HDR_FLAG_FIN DEF_BIT_00 #define NET_TCP_HDR_FLAG_CLOSE NET_TCP_HDR_FLAG_FIN /* ********************************************************************************************************* * TCP FLAG DEFINES ********************************************************************************************************* */ /* ------------------ NET TCP FLAGS ------------------- */ #define NET_TCP_FLAG_NONE DEF_BIT_NONE #define NET_TCP_FLAG_USED DEF_BIT_00 /* TCP conn cur used; i.e. NOT in free TCP conn pool. */ /* ------------------ TCP TX FLAGS ------------------- */ /* TCP tx flags copied from TCP hdr flags. */ #define NET_TCP_FLAG_TX_FIN NET_TCP_HDR_FLAG_FIN #define NET_TCP_FLAG_TX_CLOSE NET_TCP_FLAG_TX_FIN #define NET_TCP_FLAG_TX_SYNC NET_TCP_HDR_FLAG_SYNC #define NET_TCP_FLAG_TX_RESET NET_TCP_HDR_FLAG_RESET #define NET_TCP_FLAG_TX_PUSH NET_TCP_HDR_FLAG_PUSH #define NET_TCP_FLAG_TX_ACK NET_TCP_HDR_FLAG_ACK #define NET_TCP_FLAG_TX_URGENT NET_TCP_HDR_FLAG_URGENT #define NET_TCP_FLAG_TX_BLOCK DEF_BIT_07 /* ------------------ TCP RX FLAGS ------------------- */ #define NET_TCP_FLAG_RX_DATA_PEEK DEF_BIT_08 #define NET_TCP_FLAG_RX_BLOCK DEF_BIT_15 /*$PAGE*/ /* ********************************************************************************************************* * TCP TYPE DEFINES * * Note(s) : (1) NET_TCP_TYPE_&&& #define values specifically chosen as ASCII representations of the TCP * types. Memory displays of TCP types will display with their chosen ASCII names. ********************************************************************************************************* */ /* ------------------ NET TCP TYPES ------------------- */ #if (CPU_CFG_ENDIAN_TYPE == CPU_ENDIAN_TYPE_BIG) #define NET_TCP_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x54435020u /* "TCP " in ASCII. */ #else #if (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_32) #define NET_TCP_TYPE_NONE 0x454E4F4Eu /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x20504354u /* "TCP " in ASCII. */ #elif (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_16) #define NET_TCP_TYPE_NONE 0x4F4E454Eu /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x43542050u /* "TCP " in ASCII. */ #else /* Dflt CPU_WORD_SIZE_08. */ #define NET_TCP_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_TYPE_CONN 0x54435020u /* "TCP " in ASCII. */ #endif #endif /* ********************************************************************************************************* * TCP SEQUENCE NUMBER DEFINES * * Note(s) : (1) TCP initial transmit sequence number is incremented by a fixed value, preferably a large * prime value or a large value with multiple unique factors. * * (a) One reasonable TCP initial transmit sequence number increment value example : * * 65527 = 37 * 23 * 11 * 7 * * * #### NET_TCP_TX_SEQ_NBR_CTR_INC could be developer-configured in 'net_cfg.h'. * * See also 'NET_TCP_TX_GET_SEQ_NBR() Notes #1b2 & #1c2'. ********************************************************************************************************* */ #define NET_TCP_SEQ_NBR_NONE 0u #define NET_TCP_ACK_NBR_NONE NET_TCP_SEQ_NBR_NONE #define NET_TCP_TX_SEQ_NBR_CTR_INC 65527u /* See Note #1. */ #define NET_TCP_ACK_NBR_DUP_WIN_SIZE_SCALE 4 /*$PAGE*/ /* ********************************************************************************************************* * TCP DATA/TOTAL LENGTH DEFINES * * Note(s) : (1) (a) TCP total length #define's (NET_TCP_TOT_LEN) relate to the total size of a complete * TCP packet, including the packet's TCP header. Note that a complete TCP packet MAY * be fragmented in multiple Internet Protocol packets. * * (b) TCP data length #define's (NET_TCP_DATA_LEN) relate to the data size of a complete * TCP packet, equal to the total TCP packet length minus its TCP header size. Note * that a complete TCP packet MAY be fragmented in multiple Internet Protocol packets. ********************************************************************************************************* */ /* See Notes #1a & #1b. */ #define NET_TCP_DATA_LEN_MIN 0u #define NET_TCP_TOT_LEN_MIN (NET_TCP_HDR_SIZE_MIN + NET_TCP_DATA_LEN_MIN) #define NET_TCP_TOT_LEN_MAX (NET_IP_TOT_LEN_MAX - NET_IP_HDR_SIZE_MIN ) #define NET_TCP_DATA_LEN_MAX (NET_TCP_TOT_LEN_MAX - NET_TCP_HDR_SIZE_MIN) /*$PAGE*/ /* ********************************************************************************************************* * TCP SEGMENT SIZE DEFINES * * Note(s) : (1) (a) RFC # 879, Section 3 states that the TCP Maximum Segment Size "counts only * data octets in the segment, ... not the TCP header or the IP header". * * (b) RFC #1122, Section 4.2.2.6 requires that : * * (1) "The MSS value to be sent in an MSS option must be less than or equal to * * (A) MMS_R - 20 * * where MMS_R is the maximum size for a transport-layer message that can * be received." * * (2) "If an MSS option is not received at connection setup, TCP MUST assume a * default send MSS of 536 (576 - 40)." * * See also 'net_ip.h IP DATA/TOTAL LENGTH DEFINES Note #1'. ********************************************************************************************************* */ /* See Note #1. */ #define NET_TCP_MAX_SEG_SIZE_DFLT (NET_IP_MAX_DATAGRAM_SIZE_DFLT - NET_IP_HDR_SIZE_MIN - NET_TCP_HDR_SIZE_MIN) #define NET_TCP_MAX_SEG_SIZE_DFLT_RX NET_TCP_DATA_LEN_MAX /* See Note #1b1. */ #define NET_TCP_MAX_SEG_SIZE_DFLT_TX NET_TCP_MAX_SEG_SIZE_DFLT /* See Note #1b2. */ #define NET_TCP_MAX_SEG_SIZE_NONE 0u #define NET_TCP_MAX_SEG_SIZE_MIN NET_TCP_MAX_SEG_SIZE_DFLT #define NET_TCP_MAX_SEG_SIZE_MAX NET_TCP_DATA_LEN_MAX #define NET_TCP_SEG_LEN_MIN NET_TCP_DATA_LEN_MIN #define NET_TCP_SEG_LEN_MAX NET_TCP_DATA_LEN_MAX #define NET_TCP_SEG_LEN_SYNC 1u #define NET_TCP_SEG_LEN_FIN 1u #define NET_TCP_SEG_LEN_CLOSE NET_TCP_SEG_LEN_FIN #define NET_TCP_SEG_LEN_ACK 0u #define NET_TCP_SEG_LEN_RESET 0u #define NET_TCP_SEG_LEN_PROBE 0u #define NET_TCP_DATA_LEN_TX_SYNC 0u #define NET_TCP_DATA_LEN_TX_FIN 0u #define NET_TCP_DATA_LEN_TX_CLOSE NET_TCP_DATA_LEN_TX_FIN #define NET_TCP_DATA_LEN_TX_ACK 0u #define NET_TCP_DATA_LEN_TX_PROBE_NO_DATA 0u #define NET_TCP_DATA_LEN_TX_PROBE_DATA 1u #define NET_TCP_DATA_LEN_TX_RESET 0u #define NET_TCP_TX_PROBE_DATA 0x00u /* ********************************************************************************************************* * TCP WINDOW SIZE DEFINES * * Note(s) : (1) Although NO RFC specifies the absolute minimum TCP connection window size value allowed, * RFC #793, Section 3.7 'Data Communication : Managing the Window' states that for "the * window ... there is an assumption that this is related to the currently available data * buffer space available for this connection". ********************************************************************************************************* */ #define NET_TCP_WIN_SIZE_NONE 0u #define NET_TCP_WIN_SIZE_MIN NET_TCP_MAX_SEG_SIZE_MIN #define NET_TCP_WIN_SIZE_MAX DEF_INT_16U_MAX_VAL /*$PAGE*/ /* ********************************************************************************************************* * TCP HEADER OPTIONS DEFINES * * Note(s) : (1) See the following RFC's for TCP options summary : * * (a) RFC # 793, Section 3.1 'Header Format : Options' * (b) RFC #1122; Sections 4.2.2.5, 4.2.2.6 * * (2) TCP option types are encoded in the first octet for each TCP option as follows : * * -------- * | TYPE | * -------- * * The TCP option type value determines the TCP option format : * * (a) The following TCP option types are single-octet TCP options -- i.e. the option type * octet is the ONLY octet for the TCP option. * * (1) TYPE = 0 End of Options List * (2) TYPE = 1 No Operation * * * (b) All other TCP options MUST be multi-octet TCP options (see RFC #1122, Section 4.2.2.5) : * * ------------------------------ * | TYPE | LEN | TCP OPT | * ------------------------------ * * where * TYPE Indicates the specific TCP option type * LEN Indicates the total TCP option length, in octets, including * the option type & the option length octets * TCP OPT Additional TCP option octets, if any, that contain the remaining * TCP option information * * The following TCP option types are multi-octet TCP options where the option's second * octet specify the total TCP option length, in octets, including the option type & the * option length octets : * * (1) TYPE = 2 Maximum Segment Size See RFC # 793, Section 3.1 'Header Format : * Options : Maximum Segment Size'; * RFC #1122, Section 4.2.2.6; * RFC # 879, Section 3 * * (2) TYPE = 3 Window Scale See 'net_tcp.h Note #1c1' * (3) TYPE = 4 SACK Allowed See 'net_tcp.h Note #1c2' * (4) TYPE = 5 SACK Option See 'net_tcp.h Note #1c2' * (5) TYPE = 6 Echo Request See 'net_tcp.h Note #1c3' * (6) TYPE = 7 Echo Reply See 'net_tcp.h Note #1c3' * (7) TYPE = 8 Timestamp See 'net_tcp.h Note #1c4' * * (3) TCP header allows for a maximum option list length of 40 octets : * * NET_TCP_HDR_OPT_SIZE_MAX = NET_TCP_HDR_SIZE_MAX - NET_TCP_HDR_SIZE_MIN * * = 60 - 20 * * = 40 * * (4) 'NET_TCP_OPT_SIZE' MUST be pre-defined PRIOR to all definitions that require TCP option * size data type. ********************************************************************************************************* */ /*$PAGE*/ #define NET_TCP_HDR_OPT_END_LIST 0u #define NET_TCP_HDR_OPT_NOP 1u #define NET_TCP_HDR_OPT_MAX_SEG_SIZE 2u #define NET_TCP_HDR_OPT_WIN_SCALE 3u #define NET_TCP_HDR_OPT_SACK_PERMIT 4u #define NET_TCP_HDR_OPT_SACK 5u #define NET_TCP_HDR_OPT_ECHO_REQ 6u #define NET_TCP_HDR_OPT_ECHO_REPLY 7u #define NET_TCP_HDR_OPT_TS 8u #define NET_TCP_HDR_OPT_PAD NET_TCP_HDR_OPT_END_LIST #define NET_TCP_HDR_OPT_LEN_END_LIST 1u #define NET_TCP_HDR_OPT_LEN_NOP 1u #define NET_TCP_HDR_OPT_LEN_MAX_SEG_SIZE 4u #define NET_TCP_HDR_OPT_LEN_WIN_SCALE 3u #define NET_TCP_HDR_OPT_LEN_SACK_PERMIT 2u #define NET_TCP_HDR_OPT_LEN_ECHO_REQ 6u #define NET_TCP_HDR_OPT_LEN_ECHO_REPLY 6u #define NET_TCP_HDR_OPT_LEN_TS 10u #define NET_TCP_HDR_OPT_LEN_SACK_MIN 6u #define NET_TCP_HDR_OPT_LEN_SACK_MAX 38u #define NET_TCP_HDR_OPT_LEN_MIN 1u #define NET_TCP_HDR_OPT_LEN_MIN_LEN 2u #define NET_TCP_HDR_OPT_LEN_MAX 38u typedef CPU_INT32U NET_TCP_OPT_SIZE; /* TCP opt size data type (see Note #4). */ #define NET_TCP_HDR_OPT_SIZE_WORD (sizeof(NET_TCP_OPT_SIZE)) #define NET_TCP_HDR_OPT_SIZE_MAX (NET_TCP_HDR_SIZE_MAX - NET_TCP_HDR_SIZE_MIN) #define NET_TCP_HDR_OPT_NBR_MIN 0u #define NET_TCP_HDR_OPT_NBR_MAX (NET_TCP_HDR_OPT_SIZE_MAX / NET_TCP_HDR_OPT_SIZE_WORD) #define NET_TCP_HDR_OPT_IX NET_TCP_HDR_SIZE_MIN /*$PAGE*/ /* ********************************************************************************************************* * TCP OPTION CONFIGURATION TYPE DEFINES * * Note(s) : (1) NET_TCP_OPT_CFG_TYPE_&&& #define values specifically chosen as ASCII representations of * the TCP option configuration types. Memory displays of TCP option configuration buffers * will display the TCP option configuration TYPEs with their chosen ASCII names. ********************************************************************************************************* */ /* ---------------- TCP OPT CFG TYPES ----------------- */ #if (CPU_CFG_ENDIAN_TYPE == CPU_ENDIAN_TYPE_BIG) #define NET_TCP_OPT_CFG_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x4D535320u /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x57494E20u /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x53434B50u /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x5341434Bu /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x45524551u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4543484Fu /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x54532020u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #else #if (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_32) #define NET_TCP_OPT_CFG_TYPE_NONE 0x454E4F4Eu /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x2053534Du /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x204E4957u /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x504B4353u /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x4B434153u /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x51455245u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4F484345u /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x20205354u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #elif (CPU_CFG_DATA_SIZE == CPU_WORD_SIZE_16) #define NET_TCP_OPT_CFG_TYPE_NONE 0x4F4E454Eu /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x534D2053u /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x4957204Eu /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x4353504Bu /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x41534B43u /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x52455145u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x43454F48u /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x53542020u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #else /* Dflt CPU_WORD_SIZE_08. */ #define NET_TCP_OPT_CFG_TYPE_NONE 0x4E4F4E45u /* "NONE" in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_MAX_SEG_SIZE 0x4D535320u /* "MSS " in ASCII. */ #define NET_TCP_OPT_CFG_TYPE_WIN_SCALE 0x57494E20u /* "WIN " in ASCII (see 'net_tcp.h Note #1c1'). */ #define NET_TCP_OPT_CFG_TYPE_SACK_PERMIT 0x53434B50u /* "SCKP" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_SACK 0x5341434Bu /* "SACK" in ASCII (see 'net_tcp.h Note #1c2'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REQ 0x45524551u /* "EREQ" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_ECHO_REPLY 0x4543484Fu /* "ECHO" in ASCII (see 'net_tcp.h Note #1c3'). */ #define NET_TCP_OPT_CFG_TYPE_TS 0x54532020u /* "TS " in ASCII (see 'net_tcp.h Note #1c4'). */ #endif #endif /*$PAGE*/ /* ********************************************************************************************************* * TCP CONNECTION TIMEOUT DEFINES * * Note(s) : (1) (a) (1) RFC #1122, Section 4.2.2.13 'DISCUSSION' states that "the graceful close algorithm * of TCP requires that the connection state remain defined on (at least) one end of * the connection, for a timeout period of 2xMSL ... During this period, the (remote * socket, local socket) pair that defines the connection is busy and cannot be reused". * * (2) The following sections reiterate that the TIME-WAIT state timeout scalar is two * maximum segment lifetimes (2 MSL) : * * (A) RFC #793, Section 3.9 'Event Processing : SEGMENT ARRIVES : * Check Sequence Number : TIME-WAIT STATE' * (B) RFC #793, Section 3.9 'Event Processing : SEGMENT ARRIVES : * Check FIN Bit : TIME-WAIT STATE' * * (b) (1) RFC #793, Section 3.3 'Sequence Numbers : Knowing When to Keep Quiet' states that * "the Maximum Segment Lifetime (MSL) is ... to be 2 minutes. This is an engineering * choice, and may be changed if experience indicates it is desirable to do so". * * (2) Microsoft Corporation's Windows XP defaults MSL to 15 seconds. ********************************************************************************************************* */ /* Max seg timeout (see Note #1b) : */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_MIN_SEC ( 0u ) /* ... min = 0 seconds */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_MAX_SEC ( 2u * DEF_TIME_NBR_SEC_PER_MIN) /* ... max = 2 minutes */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_DFLT_SEC ( 15u ) /* ... dflt = 15 seconds */ #define NET_TCP_CONN_TIMEOUT_MAX_SEG_SCALAR 2u /* ... scalar (see Note #1a). */ #define NET_TCP_CONN_TIMEOUT_CONN_DFLT_SEC (120u * DEF_TIME_NBR_SEC_PER_MIN) /* Dflt conn timeout = 120 minutes */ #define NET_TCP_CONN_TIMEOUT_USER_DFLT_SEC ( 30u * DEF_TIME_NBR_SEC_PER_MIN) /* Dflt user timeout = 30 minutes */ /*$PAGE*/ /* ********************************************************************************************************* * TCP CONNECTION STATES * * Note(s) : (1) See the following RFC's for TCP state machine summary : * * (a) RFC # 793; Sections 3.2, 3.4, 3.5, 3.9 * (b) RFC #1122; Sections 4.2.2.8, 4.2.2.10, 4.2.2.11, 4.2.2.13, 4.2.2.18, 4.2.2.20 * * (2) (a) #### Additional closing-data-available state used for closing connections to allow the * application layer to receive any remaining data. * * See also 'net_tcp.c NetTCP_RxPktConnHandlerFinWait1() Note #2f5A2', * 'net_tcp.c NetTCP_RxPktConnHandlerFinWait2() Note #2f5B', * 'net_tcp.c NetTCP_RxPktConnHandlerClosing() Note #2d2B2a1B', * & 'net_tcp.c NetTCP_RxPktConnHandlerLastAck() Note #2d2A1b'. ********************************************************************************************************* */ #define NET_TCP_CONN_STATE_NONE 0u #define NET_TCP_CONN_STATE_FREE 1u #define NET_TCP_CONN_STATE_CLOSED 10u #define NET_TCP_CONN_STATE_LISTEN 20u #define NET_TCP_CONN_STATE_SYNC_RXD 30u #define NET_TCP_CONN_STATE_SYNC_RXD_PASSIVE 31u #define NET_TCP_CONN_STATE_SYNC_RXD_ACTIVE 32u #define NET_TCP_CONN_STATE_SYNC_TXD 35u #define NET_TCP_CONN_STATE_CONN 40u #define NET_TCP_CONN_STATE_FIN_WAIT_1 50u #define NET_TCP_CONN_STATE_FIN_WAIT_2 51u #define NET_TCP_CONN_STATE_CLOSING 52u #define NET_TCP_CONN_STATE_TIME_WAIT 53u #define NET_TCP_CONN_STATE_CLOSE_WAIT 55u #define NET_TCP_CONN_STATE_LAST_ACK 56u #define NET_TCP_CONN_STATE_CLOSING_DATA_AVAIL 59u /* See Note #2a. */ /* ********************************************************************************************************* * TCP CONNECTION QUEUE STATES ********************************************************************************************************* */ #define NET_TCP_RX_Q_STATE_NONE 0u #define NET_TCP_RX_Q_STATE_CLOSED 100u #define NET_TCP_RX_Q_STATE_CLOSING 101u #define NET_TCP_RX_Q_STATE_SYNC 110u #define NET_TCP_RX_Q_STATE_CONN 111u #define NET_TCP_TX_Q_STATE_NONE 0u #define NET_TCP_TX_Q_STATE_CLOSED 200u #define NET_TCP_TX_Q_STATE_CLOSING 201u #define NET_TCP_TX_Q_STATE_SYNC 210u #define NET_TCP_TX_Q_STATE_CONN 211u #define NET_TCP_TX_Q_STATE_SUSPEND 215u #define NET_TCP_TX_Q_STATE_CLOSED_SUSPEND 220u #define NET_TCP_TX_Q_STATE_CLOSING_SUSPEND 221u /*$PAGE*/ /* ********************************************************************************************************* * TCP CONNECTION CODE DEFINES **************
上传时间： 2015-11-22
上传用户：the same kong
高通(Qualcomm)蓝牙芯片QCC5144_硬件设计详细指导书（官方内部培训手册）其内容是针对硬件设计、部分重要元器件选择(ESD，Filter）及走线注意事项的详细说明。2 Power management 2.1 SMPS 2.1.1 Components specification 2.1.2 Input power supply selection 92.1.3 Minimize SMPS EMI emissions 2.1.4 Internal LDOs and digital core decoupling 2.1.5 Powering external components 2.2 Charger 2.2.1 Charger connections.2.2.2 General charger operation2.2.3 Temperature measurement during charging 2.3 SYS_CTRL 3 Bluetooth radio3.1 RF PSU component choice 3.2 RF band-pass filter3.3 Layout (天线 走线的注意事项)4 Audio4.1 Audio bypass capacitors 4.2 Earphone speaker output4.3 Line/Mic input 4.4 Headphone output optimizition5 LED pads 5.1 LED driver 5.2 Digital/Button input 5.3 Analog input5.4 Disabled 6 Reset pin (Reset#)7 USB interfaces7.1 USB device port7.1.1 USB device port7.1.2 Layout notes 7.1.3 USB charger detectionA QCC5144 VFBGA example schematic and BOM B Recommended SMPS components specificationB.1 Inductor specifition B.2 Recommended inductors B.3 SMPS capacitor specifition
上传时间： 2022-04-07
上传用户：默默
eeworm.com VIP专区 单片机源码系列 38资源包含以下内容：1. C51的存储种类和存储器类型.doc2. 单片机外围电路设计.pdf3. LCD12864数据手册.rar4. 51单片机C语言全新教程_(强力推荐).pdf5. 模数转换器设计指南 第十八版.rar6. 单片机:推箱子游戏HEX文件.rar7. pcf8591中文.pdf8. 基于单片机的推箱子游戏仿真结果.rar9. DS1302实时时钟芯片的C语言源程序.ppt10. 单片机使用工具.exe11. 单片机语音技术.pdf12. 基于AT89S51单片机的频率可调的方波信号发生器.rar13. 汇编小程序.rar14. TX-1C型单片机原理图.pdf15. 单片机ppt教程.zip16. 单片机控制的电动车控制器.doc17. 单片机C语言程序设计实训100例.pdf18. C语言编程宝典.rar19. 基于STC89C52单片机的全自动充电机设计.zip20. 学习MSP430单片机讲座（软件）.pdf21. 基于GSM短信模块的定位跟踪系统设计实现.pdf22. 加油机监控系统设计.pdf23. 基于GSM无线传输的远程抄表终端设计论文.pdf24. 单片机原理实验指导书.doc25. MSP430 C语言例题.pdf26. DS18B20温度测量、报警系统的设计.doc27. [电动机的单片机控制].王晓明.扫描版.pdf28. PIC单片机C语言.pdf29. MSP430寄存器.doc30. 单片机双机通信系统-课程设计.doc31. PIC16C5X系列单片机的原理及应用.pdf32. ABB_使用入门_-_IRC5_与_RobotStudio_Online.pdf33. 单片机与数模转换器的接口.pdf34. 单片机c实例100.doc35. DS18B20温度测量、报警系统的设计.doc36. 智能小车设计论文(电路+程序+论文).doc37. 单片机小工具.exe38. 基于单片机温度控制系统的硬件设计.pdf39. EK-LM3S8962评估板用户手册.pdf40. 电子基础--单片机微处理器和微控制器.rar41. C语言32个关键字.doc42. DD-900实验开发板原理图.pdf43. 波形发生器的设计.ppt44. MCS-51单片机实用子程序集.pdf45. MSP430中文手册.pdf46. 单片机波形发生器的设计.pdf47. iar_msp430_教程.pdf48. MSP430系列常用模块应用原理.pdf49. 通用LED点阵代码生成器.exe50. AVR单片机入门教程.pdf51. PSHLY-B回路电阻测试仪.doc52. 摇摇棒程序C语言代码.doc53. C语言编程宝典.rar54. ISP下载线.rar55. 六位数码管知识学习.doc56. Keil与proteus完美结合.zip57. ht6221资料.pdf58. 51单片机开发入门与典型实例.rar59. MSP430中实现硬件精确延时方法.pdf60. 单片机模块教学讲义.doc61. 51单片机C语言编程入门(中科大).pdf62. EM78P520N 中文版.pdf63. 懒人C51初始化程序.exe.exe64. EM78P468N 中文版.pdf65. 字模软件 V0.1.exe66. EM78P418N 中文版.pdf67. PWM调速计算软件.exe68. EM78P176N 中文版.pdf69. EM78P173N 中文版.pdf70. EM78P372N规格书.pdf71. MSP430单片机教学课件.pdf72. 495个C语言问题.pdf73. PIC单片机实用教程-提高篇.pdf74. 贴片外观检验规范.doc75. 51单片机-1602-按键-温度-时钟.doc76. LED光立方制作.ppt77. 指针式与数字式万用表各有优缺点.doc78. PL-2303 Win7 Driver Installer.exe79. 键盘输入接口与状态机编程学习.doc80. 单片机和电机的简单结合运用.rar81. 51单片机自动变速的跑马灯试验.pdf82. 《实战AVR单片机C语言》.pdf83. 电压表液晶显示.rar84. 卡尔曼滤波的基本原理及应用.pdf85. PT100温度传感器.pdf86. 温度传感器按键设置上下温度1602的应用.rar87. MC9S08DZ60中文数据手册.pdf88. 单片机智能小车巡迹壁障.doc89. msp430程序运用步骤讲解.pdf90. 基于STC12C5A60S2与AD620的小信号采集系统.rar91. 避障模块.rar92. STC89C51RC中文手册.pdf93. 89c51的等精度频率计lcd1602显示.rar94. 经典基本电路分析.pdf95. 单片机C语言应用程序设计（修订版）.rar96. Keil_uVision4_V9.00汉化包.rar97. 基于单片机的无刷直流电机的控制系统——论文.doc98. DIY_3D8光立方.pdf99. 单片机项目18-汉字显示（LCD12864）.rar100. 单片机项目24-基于VB的上位机程序设计.rar
上传时间： 2013-07-19
上传用户：eeworm
VIP专区-嵌入式/单片机编程源码精选合集系列（13）资源包含以下内容：1. CPMinterrupt 860中断管理.2. 菲利普LPC900系列写Flash源码.3. 前段时间做了一个AT91M55800的芯片测试.4. tms320c5402 bootloader.5. tms320c54x realtime os.6. tms320 c5416 boot code.7. MGLS-240128TA液晶点阵显示驱动程序.8. 嵌入式WINDOWSCE的书.9. 嵌入式TCP/IP包.10. sl811hs的host源程序.11. 嵌入式产品中的osip的源代码..12. msp430的FLASH自编程子程序.13. IGNITE开发板说明书.14. 嵌入式实时系统中的优先级反转问题.15. 仅供参考.16. 仅供参考.17. LCD driver 程序.18. 一个能跨页面读写的I2C源码.19. 一个2051控制两个步进电机的源码.20. 1330液晶源码（可直接调用汉字）.21. pcf8583 常用时钟芯片的使用.22. 1815 LCD drive IC 类驱动测试程序.23. 内存检测程序源代码.24. 嵌入式系统词汇表.25. demonstrate how to use the bulk endpoint pairing feature of the EZ-USB chip.26. A Simple isochronous transfer. Reads 8051 ports A,B and C, and continuously sends a five byte packet.27. 44b0x bootloader.28. 键盘只有一个键 b.29. tornado安装说明及KEY.30. 6711a板程序的傅立叶变换.31. 6711开发的源程序.32. 6711开发程序例子.33. 6711开发板源程序.34. 6711开发板源程序.35. 智能楼宇自动控制系统.36. YAFFS的升级版本YAFFS2.37. 嵌入开发笔记 用ps阅读器打开.38. 嵌入式系统的重要概念.39. 嵌入式系统的调试方法.40. 一个在mck2407板上控制无刷电机恒速运行的程序.
上传时间： 2013-07-21
上传用户：eeworm
VIP专区-嵌入式/单片机编程源码精选合集系列（49）资源包含以下内容：1. 凌阳非接触式红外测温传感器的C51源程序。.2. 液晶模块LCD2X8C驱动程序.3. 含t h r e a d x,u c o s 的b s p.4. 液晶sed1335芯片.5. 8237可编程DMA控制器altera提供.6. xilinx嵌入式开发源码.7. ZLG的LPC2220读取SD卡的源代码.8. 三星44b0 usbpid驱动程序.9. 三星44B0的一款BOOTLOADER.10. i2c_slave mode for pic.11. max7219驱动.12. max7219控制程序.13. 语音通用程序.14. adc通用程序.15. 通用语音资料.16. ATMEGA128....液晶显示程序.17. 基于MSP430的单片机的TC35/MC35的无线通讯MODEM.18. Uc-Os ii的多任务操作系统全部原代码（强烈推荐）.19. nios开发ucos源码.20. MinOS嵌入式操作系统,C/C++源代码!基于KeilC51编译器..21. 基于51单片机的滤波程序.22. IIC读写程序.23. 无刷电机无位置传感器dsp程序.24. c51液晶显示程序,显示模块,可通用于基于HD44780内控器的液晶显示器..25. DP-51H下载仿真实验仪提供80C51与接口实例.ZLG7290例程*.26. DP-51H下载仿真实验仪提供80C51与接口实例.读EEPROM并显示例程*.27. 一个读取PCI配置空间的TOOL (在DOS下OR WIN 98).28. AT89C52实时时钟DS1302测试,带Proteus文件.29. 用AT89C52演奏音乐.30. 这个是安防用的控制键盘C源程序,采用KEIL C51开发.用于控制前端解码器!.31. 这是一个用于视频切换的控制程序,采用AT89C51芯片,KEIL 51开发.32. 自己近期写的一个串口通信的小程序.33. 这是基于蓝海微芯LJD-SY-XA+单片机开发系统的远程无线监控系统的DA及AD采集和数码显示的部分.34. 基于51内核的单片机的ucos-ii操作系统的移植的源代码.35. 此代码是实现将lwip协议移植于51单片机的测试程序.36. DOS下采用中断接收数据的串口通讯的例子,很难找到的好东西!.37. lpc2292的can总线的简单收发程序 底层驱动程序都有.38. 数字密码锁设计的源代码,喜欢的朋友就下载..39. 一个使用STGapiBuffer编程的例子.40. 好东西 AVR study.
上传时间： 2013-04-15
上传用户：eeworm
VIP专区-嵌入式/单片机编程源码精选合集系列（84）资源包含以下内容：1. 基于fpga和sopc的用VHDL语言编写的EDA的PS/2鼠标与VGA控制模块.2. 基于fpga和sopc的用VHDL语言编写的EDA的VGA彩条信号显示控制器.3. 基于fpga和sopc的用VHDL语言编写的EDA的VGA图像显示控制器.4. 基于fpga和sopc的用VHDL语言编写的EDA的PS/2和VGA控制显示控制器.5. 基于fpga和sopc的用VHDL语言编写的EDA的USB控制模块程序.6. 基于fpga和sopc的用VHDL语言编写的EDA的32位Nios CPU嵌入式系统软硬件设计.7. 基于fpga和sopc的用VHDL语言编写的EDA的32位Nios CPU嵌入式系统及其DMA设计俄罗斯方块游戏机.8. 北京革新公司的2410的看门狗测试程序.9. 基于PHILIPS ARM7的I2C驱动程序.10. rf cc2420开发的PROTEL原理图 处理器mega128 公司内部资料.11. MP4 AVI CODE AND TFT LCD CODE.12. 鼠标驱动范例.13. 采用CPLD来培植ALTERA公司的CYCLONE系列FPGA.14. DVB系统的SDI数据数据传输接口.15. VHDL数字钟 数字电子钟 此数字电子钟具有的功能包括： 1. 计时.16. 这十篇论文主要讲述了VXWORKS对外设的控制和通讯.17. 这是语音芯片ISD4004的操作代码.18. 这是芯片PMC6388的硬件初始化程序.19. 优先级算法以及调度算法中其他的算法。想要下载的朋友可以看看.20. 基于DAM6416开发板的PCI下载程序.21. 基于DAM6416的通过PCI的主机和视频口的通信程序.22. 基于DAM6416的通过PCI的视频口和主机的通信程序.23. 自己编制的加法器的verilog程序 希望对大家有所帮助.24. 在win(2000/2003)下面制作CRAMFS映像文件 专门用于嵌入式Linux开发 由于网络上没有类似的软件 索性自己写了一个 经过测试OK 全部源代码.25. 51按键典型程序 51按键典型程序.26. 液晶显示控制模块T6963的完整C函数,包括图形文本方式显示.27. arm开发板资料CPLD源代码armcore9.28. G729编码和解码的Matlab源程序 调用方法： 1.需要编码时.29. 我编的遗传算法matlab程序.30. MPS430ZIGBB PPT文档 相关介绍 对了解有一定作用.31. 该程序用来测试89C51与IDE硬盘的接口.32. 一个使用PROTEL99设计的一款程控滤波器.33. 2410开发板底板原理图.34. 大学当中跟别人做的一个东西.35. C8051F350的抗干扰数据采集程序.36. 完整的在Windows下 PCI CAN卡的驱动程序及测试程序.37. 功能：双字节十六进制小数转换成双字节ＢＣＤ码小数 入口条件：待转换的双字节十六进制小数在R2、R3中。 出口信息：转换后的双字节ＢＣＤ码小数仍在R2、R3中。 影响资源：PSW、A、B、R2.38. 浮点数代数值比较（不影响待比较操作数） 入口条件：待比较操作数分别在[R0]和[R1]中。 出口信息：若CY=1.39. 功能：浮点取整函数 入口条件：操作数在[R0]中。 出口信息：结果仍在[R0]中。 影响资源：PSW、A、R2、R3、R4、位PFA 堆栈需求： ６字节.40. 功能：浮点倒数函数 入口条件：操作数在[R0]中。 出口信息：OV=0时.
标签： 显微
上传时间： 2013-04-15
上传用户：eeworm
Protel 99 for Win在电路设计中的应用
上传时间： 2013-04-15
上传用户：eeworm
专辑类----PCB及CAD相关资料专辑 Protel-99-for-Win在电路设计中的应用-281页-9.5M.rar
上传时间： 2013-04-24
上传用户：ggwz258
