本文首次设计并验证了基于macom三合一芯片设计的光模块电路,该电路旨在提供一种满足SFF-8472中规定的数字诊断功能的低成本SFP+模块。电路采用激光器驱动、限幅放大器、控制器以及时钟恢复单元集成的单芯片,在保证高精度数字诊断功能基础上,实现了低成本高可靠的特点。该电路在光接收接口组件与激光器驱动和限幅放大器单元的限幅放大器部分之间接入滤波器来提高模块的灵敏度及信号质量。在控制器单元的数字电位器的引脚上采用外加电阻的方式避免出现上电不发光的故障问题。该研究结果为下一代SFP-DD光模块设计与开发工作,奠定了一定的理论与实践基础。This paper designs and validates the optical module circuit based on the MACOM Trinity chip for the first time.This circuit aims to provide a low-cost SFP module which meets the digital diagnosis function specified in SFF-8472.The circuit uses a single chip integrated with laser driver,limiting amplifier,controller and clock recovery unit.On the basis of ensuring high precision digital diagnosis function,it achieves the characteristics of low cost and high reliability.The circuit connects a filter between the optical receiving interface module and the limiting amplifier part of the laser driver and limiting amplifier unit to improve the sensitivity and Signal quality of the module.The pin of the digital potentiometer in the controller unit is equipped with an external resistance to avoid the problem of power failure.The research results lay a theoretical and practical foundation for optical module design in high-speed data center.
上传时间： 2022-04-03
上传用户：
为了提高超高频RFID系统中阅读器在低信噪比的情况下仍具有较高的识别能力,提出一种基于FPGA系统结合软件无线电方法实现超高频RFID射频前端电路方案。超高频射频识别系统必须符合EPC Class 1generation 2标准,所设计的电路系统以Xilinx公司的XC6SLX16-2CSG324FPGA芯片为硬件基础,将数字基带调制解调和中频滤波电路在FPGA系统中设计实现,重点阐述了射频前端电路的设计结构、AD/DA转换电路,以及数字滤波器的设计。实验结果表明,所设计的超高频RFID阅读器简化了前端电路系统结构,提升了稳定性,增强了抗干扰能力。该电路系统在信噪比较低的情况下,能够较好地实现915MHz频率的射频接收和发送。In order to improve the reader UHF RFID system still has a higher ability to identify,in the case of low Signal-to-noise ratio.The UHF RFID systems must comply with EPC Class 1 generation 2 standard.In this paper,the design of the circuit system based on Xilinx＇s XC6SLX16-2CSG324 FPGA chip,and presents UHF RFID RF front-end circuit with software radio based on FPGA system.Digital baseband modem and IF filter circuit is designed and implemented in the FPGA system,and focused on designing the structure of the RF front-end circuit,AD/DA conversion circuits,and digital filter.Experimental results show that the UHF RFID reader de...
标签： 915mhz 超高频 rfid 阅读 射频 前端 电路 设计
上传时间： 2022-04-17
上传用户：shjgzh
介绍一种万能模拟信号输入采集电路,可以同时支持电压、电流、热电偶、热电阻等常见的工业类型信号,方便后级电路的测量。该研究成果通过不断优化和完善,已成功应用到了中控仪表的新产品中。The paper introduces a collection circuit of universal Signal input. The circuit support voltage, current, thermocouple, thermal resistance and other common industrial type Signal. The research results, which has been continuous optimized and improved, has been successfully applied to the new production of Zhejiang Supcon Instrument Co., Ltd.
标签： 采集电路
上传时间： 2022-04-21
上传用户：slq1234567890
Digital Signal Processing in Python基于python的数字信号处理原版，对于dsp算法的快速原型验证非常有帮助。
上传时间： 2022-04-28
上传用户：
针对交流电路过零检测电路存在结构复杂、过零点检测不准确、编程繁琐等问题，设计了一种基于LM339的硬件结构简单的过零检测电路。通过仿真软件Mulisim对该设计电路进行了仿真，实验证明了该方案过零检测的可行性、稳定性和可靠性，可直接作为交流电路中CPU的过零信号。Aiming at the problems of AC cilsuit zero crossing detection circuit such as complex structure, zero crossing detection and cumbersome programming, a zero crossing detection circuit with simple hardware structure based on LM339 was designed. The design circuit was simulated by simulation software Mulisim, and the feasibility, stability and reliability of zero crossing detection were proved by experiments, which can be used as zero crossing Signal of CPU in AC circuit directly.
上传时间： 2022-05-03
上传用户：
本文提出基于AD2S1210的旋变信号转换电路,给出了具体的电路实现方法和配置方法.相比以往的RDC方案,本系统具有精度高,设计灵活,可靠性高等特点,可广泛应用于各种伺服系统中.In this paper, the switching Signal conversion circuit based on ADS1210 is proposed, and the specific circuit implementation and configuration method are given. Compared with the previous RDC scheme, this system has the characteristics of high precision, flexible design and high reliability, and can be widely used in various servo systems.
标签： ad2s1210
上传时间： 2022-05-04
上传用户：
基于TMS320F28335的超声波流量计硬件原理图+软件源码本文以TMS320F28335 处理器为核心，设计一种用于管道流量测量的超声波流量计。系统硬件由核心板，超声波发射和接收电路，切换电路，超声换能器，基于ADS805 的高速信号采集电路，人机交互以及电源等模块构成。采用时差法进行管道流量测量，时差测量采用SCOT 加权的广义互相关时延估计算法。本论文设计的超声波流量计具有测量速度快、准确性好、成本低等优点。关键字：C2000，超声波，流量，广义互相关算法AbstractA kind of ultrasonic flowmeter using for the pipe flow measurement is designed based onTMS320F28335 in this paper. The system hardware consists of the following parts: the core board,ultrasonic Signal transmitter and receiver circuits, switch circuit, ultrasonic transducer, Signalacquisition circuit based on ADS805, human-computer interaction module and power supplymodule, etc. The system use the method of time difference for pipeline flow measurement and thetime difference is calculated by the time-delay algorithm of SCOT weighted generalizedcross-correlation. The ultrasonic flowmeter has the features of high testing speed, high precisionand low cost, etc.Keywords: C2000,Ultrasonic, Flow, Generalized Cross-Correlation Algorithm
标签： tms320f28335 超声波流量计
上传时间： 2022-05-06
上传用户：
数字频率计是电工电子中常用的测量仪器,数字频率计通过用输入待测信号对一特定长度的信号进行计数,从而得出频率并通过数码管直观的显示出来。本文提出了一种与输入同步的数字频率计的设计,提高了频率计的精度,设计采用Multisim软件进行设计和仿真的过程,介绍了其工作原理,硬件电路设计和仿真的过程。设计采用了Multisim软件进行设计和仿真,设计结果得到的验证。Digital frequency counter is used to measure the frequency of a Signal.It is common to use a multivibrator to generate a standard 1 second time base Signal and count input Signal gated by this Signal.However,the asynchronous of this time base Signal with input Signal will bring errors.In this paper,a high precision frequency counter which use synchronized time base Signal generator is proposed.This frequency counter is designed and simulated by Multisim tools and result is verified.
标签： multisim
上传时间： 2022-05-08
上传用户：
Allen的Think系列，讲述数字信号处理器（DSP）基本概念，用Python语言描述这些概念。可实际运行代码，更深的理解DSP。
上传时间： 2022-05-14
上传用户：
莱昂斯《数字信号处理（第三版）（英文版）》在Richard G. Lyons所著Understanding Digital Signal Processing, Second Edition的基础上进行了改编，针对通信类学校本科教学大纲，删除了教学中一般不涉及的内容，调整了章节顺序，并增加了z反变换、滤波器结构、线性相位FIR滤波器和其结构、模拟滤波器简介的内容，使教内容材更加完整。全书在概述了离散序列和系统的定义和实例之后，详细讨论了离散系统的特性、信号的离散化和离散卷积、z变换、离散时间傅里叶变换和离散傅里叶变换、快速傅里叶变换、数字滤波器结构、以及有限和无限脉冲响应数字滤波器的设计等基本概念和基本理论。书中涉及的数学知识以简明形式给出，深入浅出，易于理解。本书每章都增加了例题、习题和MATLAB例题，以便加强对每章内容的理解和掌握。 书中通过具有启发性的解释和精心挑选的例子，采用易于理解的数学表示方法，循序渐进地对数字信号处理技术加以说明和解释，帮助读者从整体掌握DSP基础，并逐步掌握较高层次的DSP概念和应用。本书特点：包含大量实际直观的例子；强调实际的、日常的DSP应用和解决方案·提供了全新的正交信号处理内容，包括易于理解的三维空间图；包括即使是经验丰富的专业人士也可能忽略的技术方法；涵盖频率采样、内插式FER、CIC等重要滤波器；提供流行的数字信号处理技巧。
标签： 数字信号处理
上传时间： 2022-05-22
上传用户：
