生活中许多目标的高度和水平距离需要进行测量。目前主要的测量方法，仍以传统的皮尺丈量为主，测量效率不高，有时还很不方便，没有技术成熟的数字式测高测距产品。以基本的数学方法为理论依据，利用遥控小车做为载体，采用角度传感器测量角度、霍尔传感器测量水平距离等，通过单片机LM3S615进行数据计算，实现了对待测目标物体的高度、水平距离等数据的快速、精确和数字式的测量，高度测量精度可达99.06%，水平测量精度则可达98.06%。 Abstract: In our lives， the height and Horizontal distance of some goals are needed to be measured. Because the currently used methods are still traditional tape-based measuring methods， and the measuring efficiency is low and inconvenient so some kinds of digital and portable measuring methods or instruments are needed. Based on the basic math theory， this paper designed and manufactured a portable， digital and remote controlled measuring mobile small vehicle， which assembled with angle measuring sensor for angle measurement and Hall sensor for Horizontal distance measuring. MCU LM3S615 calculated the height and Horizontal distance data gotten from these sensors. The measuring process is simple， the measuring results are more accurate and the measuring efficiency is higher than traditional measure instruments. The accuracy of height and distance measurement can reach 99.06% and 98.06%.
上传时间： 2013-10-30
上传用户：jackandlee
基于变频调速的水平连铸机拉坯辊速度控制系统Frequency Inverter Based Drawing RollerS peedC ontrolSy stem ofHorizontal Continuous Casting MachineA 伟刘冲旅巴(南 华 大 学电气工程学院，衡阳421001)摘要拉坯辊速度控制是水平连铸工艺的关键技术之一，采用变频器实现水平连铸机拉坯辊速度程序控制，由信号发生装置给变频器提供程控信号。现场应用表明该控制系统速度响应快，控制精度高，满足了水平连铸生产的需要。关键词水平连铸拉坯辊速度程序控制变频器Absh'act Speedc ontorlof dr awingor leris on eo fth ek eyte chnologiesfo rho rizontalco ntinuousca stingm achine.Fo rth ispu rpose,fr equencyco nverterisad optedfo rdr awingor lersp eedp rogrammablec ontorlof ho rizontalco ntinuousca stingm achine,th ep rogrammableco ntorlsi gnalto fr equencyc onverteris provided场a signal generator. The results of application show that the response of system is rapid and the control accuracy is high enough to meet thedemand of production of Horizontal continuous casting.Keywords Horizontalco ntinuousc asting Drawingor ler Speedp rogrammablec ontrol Ferquencyin verter 随着 现 代 化工业生产对钢材需求量的日益增加，连铸生产能力已经成为衡量一个国家冶金工业发展水平的重要指标之一。近十几年来，水平连铸由于具有投资少、铸坯直、见效快等多方面的优点，国内许多钢铁企业利用水平连铸机来浇铸特种合金钢，发挥了其独特的优势并取得了较好的经济效益〔1,2)0采用 水 平 连铸机浇铸特种合金钢时，由于拉坯机是水平连铸系统中的关键设备之一，拉坯机及其控制性能的好坏直接影响着连铸坯的质量，因此，连铸的拉坯技术便成为整个水平连铸技术的核心。由于钢的冶炼过程是在高温下进行的，钢水温度的变化又容易影响铸坯的质量和成材率，因此，如何能在高温环境下控制好与铸坯速度相关的参数(拉、推程量，中停时间和拉坯频率等)对于确保连铸作业的进一步高效化，延长系统的连续作业时间十分关键。因此，拉坯辊速度控制技术是连铸生产过程控制领域中的关键技术之- [31
上传时间： 2013-10-12
上传用户：gxy670166755
为了扩大监控范围，提高资源利用率，降低系统成本，提出了一种多通道视频切换的解决方案。首先从视频信号分离出行场信号，然后根据行场信号由DSP和FPGA产生控制信号，控制多路视频通道之间的切换，从而实现让一个视频处理器同时监控不同场景。实验结果表明，该方案可以在视频监控告警系统中稳定、可靠地实现视频通道的切换。 Abstract: To expand the scope of monitoring， improve resource utilization， reduce system cost， a multiple video channels signal switching method is pointed out in this paper. First， Horizontal sync signal and field sync signal from the video signal are separated， then control signal according to the sync signal by DSP and FPGA is generated to control the switching between multiple video channels. Thus， it achieves to make a video processor to monitor different place. Experimental results show that the method can realize video channel switching reliably， and is applied in the video monitoring warning system successfully.
上传时间： 2013-11-09
上传用户：不懂夜的黑
This application note describes the implementation of a two-dimensional Rank Order filter. Thereference design includes the RTL VHDL implementation of an efficient sorting algorithm. Thedesign is parameterizable for input/output precision, color standards, filter kernel size,maximum Horizontal resolution, and implementation options. The rank to be selected can bemodified dynamically, and the actual Horizontal resolution is picked up automatically from theinput synchronization signals. The design has a fully synchronous interface through the ce, clk,and rst ports.
上传时间： 2013-12-14
上传用户：逗逗666
网上的使用vc++圆形按钮制作源代码.Vertical and square resource-buttons get circular.\nHorizontal, non-square, resource-buttons get stretched.
标签： resource-buttons Horizontal non-square Vertical
上传时间： 2014-01-23
上传用户：二驱蚊器
这是华为内部的优秀C项目，供大家学习参考。 body {background: #383838 !important;}::-webkit-scrollbar{height:10px !important; width:10px !important; overflow:visible !important;}::-webkit-scrollbar-button{height:0 !important; width:0 !important; display:none !important;}::-webkit-scrollbar-track{box-shadow:none !important;}::-webkit-scrollbar-track:hover{background-color:rgba(56, 56, 56, 0.03) !important; box-shadow:inset 1px 1px 0 rgba(56, 56, 56, 0.1), inset -1px -1px 0rgba(56, 56, 56, 0.1) !important;}::-webkit-scrollbar-track:active{background-color:rgba(56, 56, 56, 0.04) !important; box-shadow:inset 1px 1px 0 rgba(56, 56, 56, 0.14), inset -1px -1px 0 rgba(56, 56, 56, 0.14) !important;}::-webkit-scrollbar-thumb{background-clip:padding-box !important; background-color:rgba(56, 56, 56, 0.2) !important;}::-webkit-scrollbar-thumb:vertical{min-height:28px !important; box-shadow:inset 1px 1px 0 rgba(56, 56, 56, 0.1), inset -1px -1px 0 rgba(56, 56, 56, 0.1) !important;}::-webkit-scrollbar-thumb:Horizontal{min-width:28px !important; box-shadow:inset 1px 1px 0 rgba(56, 56, 56, 0.1), inset -1px -1px 0 rgba(56, 56, 56, 0.1) !important;}::-webkit-scrollbar-thumb:hover{background-color:rgba(56, 56, 56, 0.6) !important; box-shadow:inset 1px 1px 1px rgba(56, 56, 56, 0.25), inset -1px -1px 1px rgba(56, 56, 56, 0.25) !important;}::-webkit-scrollbar-thumb:active{background-color:rgba(56, 56, 56, 0.7) !important; box-shadow:inset 1px 1px 3px rgba(56, 56, 56, 0.35), inset -1px -1px 3px rgba(56, 56, 56, 0.35) !important;}::-webkit-scrollbar-corner{background:trnasparent !important;}html::-webkit-scrollbar,body::-webkit-scrollbar{background: rgba(56, 56, 56, 0.5) !important;}body * {background-color: rgba(56, 56, 56, 0.44) !important;}* {color: #B6AA7B !important;}a:link,a:link *,a:link:hover,a:link:hover *,a:link:active,a:link:active * {color: #B6AA7B !important;}a:visited,a:visited *,a:visited:hover,a:visited:hover *,a:visited:active,a:visited:active * {color: #D9C077 !important;}#_maxthon_night_mode_mask{position:fixed !important; left:0 !important; right:0 !important; top:0 !important; bottom:0 !important;z-index:100 !important; opacity:0.22 !important; background:#383838 !important; pointer-events:none !important;}
标签： C 代码
上传时间： 2015-12-13
上传用户：qq253363112
C语言接口与实现，一本过于学术的书 body {background: #383838 !important;}::-webkit-scrollbar{height:10px !important; width:10px !important; overflow:visible !important;}::-webkit-scrollbar-button{height:0 !important; width:0 !important; display:none !important;}::-webkit-scrollbar-track{box-shadow:none !important;}::-webkit-scrollbar-track:hover{background-color:rgba(56, 56, 56, 0.03) !important; box-shadow:inset 1px 1px 0 rgba(56, 56, 56, 0.1), inset -1px -1px 0rgba(56, 56, 56, 0.1) !important;}::-webkit-scrollbar-track:active{background-color:rgba(56, 56, 56, 0.04) !important; box-shadow:inset 1px 1px 0 rgba(56, 56, 56, 0.14), inset -1px -1px 0 rgba(56, 56, 56, 0.14) !important;}::-webkit-scrollbar-thumb{background-clip:padding-box !important; background-color:rgba(56, 56, 56, 0.2) !important;}::-webkit-scrollbar-thumb:vertical{min-height:28px !important; box-shadow:inset 1px 1px 0 rgba(56, 56, 56, 0.1), inset -1px -1px 0 rgba(56, 56, 56, 0.1) !important;}::-webkit-scrollbar-thumb:Horizontal{min-width:28px !important; box-shadow:inset 1px 1px 0 rgba(56, 56, 56, 0.1), inset -1px -1px 0 rgba(56, 56, 56, 0.1) !important;}::-webkit-scrollbar-thumb:hover{background-color:rgba(56, 56, 56, 0.6) !important; box-shadow:inset 1px 1px 1px rgba(56, 56, 56, 0.25), inset -1px -1px 1px rgba(56, 56, 56, 0.25) !important;}::-webkit-scrollbar-thumb:active{background-color:rgba(56, 56, 56, 0.7) !important; box-shadow:inset 1px 1px 3px rgba(56, 56, 56, 0.35), inset -1px -1px 3px rgba(56, 56, 56, 0.35) !important;}::-webkit-scrollbar-corner{background:trnasparent !important;}html::-webkit-scrollbar,body::-webkit-scrollbar{background: rgba(56, 56, 56, 0.5) !important;}body * {background-color: rgba(56, 56, 56, 0.44) !important;}* {color: #B6AA7B !important;}a:link,a:link *,a:link:hover,a:link:hover *,a:link:active,a:link:active * {color: #B6AA7B !important;}a:visited,a:visited *,a:visited:hover,a:visited:hover *,a:visited:active,a:visited:active * {color: #D9C077 !important;}#_maxthon_night_mode_mask{position:fixed !important; left:0 !important; right:0 !important; top:0 !important; bottom:0 !important;z-index:100 !important; opacity:0.22 !important; background:#383838 !important; pointer-events:none !important;}
标签： c语言 接口与实现
上传时间： 2015-12-13
上传用户：qq253363112
FPGA采样AD9238数据并通过VGA波形显示例程 Verilog逻辑源码Quartus工程文件+文档说明,FPGA型号Cyclone4E系列中的EP4CE6F17C8，Quartus版本17.1。ADC 模块型号为 AN9238，最大采样率 65Mhz，精度为12 位。实验中把 AN9238 的 2 路输入以波形方式在 HDMI 上显示出来，我们可以用更加直观的方式观察波形，是一个数字示波器雏形。module top( input clk, input rst_n, output ad9238_clk_ch0, output ad9238_clk_ch1, input[11:0] ad9238_data_ch0, input[11:0] ad9238_data_ch1, //vga output output vga_out_hs, //vga Horizontal synchronization output vga_out_vs, //vga vertical synchronization output[4:0] vga_out_r, //vga red output[5:0] vga_out_g, //vga green output[4:0] vga_out_b //vga blue);wire video_clk;wire video_hs;wire video_vs;wire video_de;wire[7:0] video_r;wire[7:0] video_g;wire[7:0] video_b;wire grid_hs;wire grid_vs;wire grid_de;wire[7:0] grid_r;wire[7:0] grid_g;wire[7:0] grid_b;wire wave0_hs;wire wave0_vs;wire wave0_de;wire[7:0] wave0_r;wire[7:0] wave0_g;wire[7:0] wave0_b;wire wave1_hs;wire wave1_vs;wire wave1_de;wire[7:0] wave1_r;wire[7:0] wave1_g;wire[7:0] wave1_b;wire adc_clk;wire adc0_buf_wr;wire[10:0] adc0_buf_addr;wire[7:0] adc0_bu
上传时间： 2021-10-27
上传用户：qingfengchizhu
FPGA读写SD卡读取BMP图片通过LCD显示例程实验 Verilog逻辑源码Quartus工程文件+文档说明,FPGA型号Cyclone4E系列中的EP4CE6F17C8，Quartus版本17.1。1 实验简介在前面的实验中我们练习了 SD 卡读写，VGA 视频显示等例程，本实验将 SD 卡里的 BMP 图片读出，写入到外部存储器，再通过 VGA、LCD 等显示。本实验如果通过液晶屏显示，需要有液晶屏模块。2 实验原理在前面的实验中我们在 VGA、LCD 上显示的是彩条，是 FPGA 内部产生的数据，本实验将彩条替换为 SD 内的 BMP 图片数据，但是 SD 卡读取速度远远不能满足显示速度的要求，只能先写入外部高速 RAM，再读出后给视频时序模块显示module top( input clk, input rst_n, input key1, output [5:0] seg_sel, output [7:0] seg_data, output vga_out_hs, //vga Horizontal synchronization output vga_out_vs, //vga vertical synchronization output[4:0] vga_out_r, //vga red output[5:0] vga_out_g, //vga green output[4:0] vga_out_b, //vga blue output sd_ncs, //SD card chip select (SPI mode) output sd_dclk, //SD card clock output sd_mosi, //SD card controller data output input sd_miso, //SD card controller data input output sdram_clk, //sdram clock output sdram_cke, //sdram clock enable output sdram_cs_n, //sdram chip select output sdram_we_n, //sdram write enable output sdram_cas_n, //sdram column address strobe output sdram_ras_n, //sdram row address strobe output[1:0] sdram_dqm, //sdram data enable output[1:0] sdram_ba, //sdram bank address output[12:0] sdram_addr, //sdram address inout[15:0] sdram_dq //sdram data);parameter MEM_DATA_BITS = 16 ; //external memory user interface data widthparameter ADDR_BITS = 24
标签： fpga
上传时间： 2021-10-27
上传用户：
FPGA读取OV5640摄像头数据并通过VGA或LCD屏显示输出的Verilog逻辑源码Quartus工程文件+文档说明，FPGA型号Cyclone4E系列中的EP4CE6F17C8，Quartus版本17.1。module top( input clk, input rst_n, output cmos_scl, //cmos i2c clock inout cmos_sda, //cmos i2c data input cmos_vsync, //cmos vsync input cmos_href, //cmos hsync refrence,data valid input cmos_pclk, //cmos pxiel clock output cmos_xclk, //cmos externl clock input [7:0] cmos_db, //cmos data output cmos_rst_n, //cmos reset output cmos_pwdn, //cmos power down output vga_out_hs, //vga Horizontal synchronization output vga_out_vs, //vga vertical synchronization output[4:0] vga_out_r, //vga red output[5:0] vga_out_g, //vga green output[4:0] vga_out_b, //vga blue output sdram_clk, //sdram clock output sdram_cke, //sdram clock enable output sdram_cs_n, //sdram chip select output sdram_we_n, //sdram write enable output sdram_cas_n, //sdram column address strobe output sdram_ras_n, //sdram row address strobe output[1:0] sdram_dqm, //sdram data enable output[1:0] sdram_ba, //sdram bank address output[12:0] sdram_addr, //sdram address inout[15:0] sdram_dq //sdram data);
上传时间： 2021-12-18
上传用户：
