前面讨论了很多内容，基本上涉及了有关PCB板的绝大部分相关的知识。第二章探讨了传输线的基本原理，第三章探讨了串扰，在第四章里我们阐述了许多在现代设计中必须关注的非理想互连的问题。对于信号从驱动端引脚到接收端引脚的电气路径的相关问题，我们已经做了一些探究，然而对于硅芯片，即处于封装内部的IC来说，其信号传输通常要通过过孔和连接器来进行，对这样的情况我们该如何处理？在本章中，我们将通过对封装、过孔和连接器的研究，阐述其原理，从而指导大家在设计的时候对整个电气路径进行完整地分析，即从驱动端内部IC芯片的焊盘到接受器IC芯片的焊盘。
标签： High-Speed Digital System desi
上传时间： 2013-11-24
上传用户：maizezhen
高速数字系统设计下载pdf:High-Speed Digital SystemDesign—A Handbook ofInterconnect Theory and DesignPracticesStephen H. HallGarrett W. HallJames A. McCallA Wiley-Interscience Publication JOHN WILEY & SONS, INC.New York • Chichester • Weinheim • Brisbane • Singapore • TorontoCopyright © 2000 by John Wiley & Sons, Inc.speeddigital systems at the platform level. The book walks the reader through everyrequired concept, from basic transmission line theory to digital timing analysis, high-speedmeasurement techniques, as well as many other topics. In doing so, a unique balancebetween theory and practical applications is achieved that will allow the reader not only tounderstand the nature of the problem, but also provide practical guidance to the solution.The level of theoretical understanding is such that the reader will be equipped to see beyondthe immediate practical application and solve problems not contained within these pages.Much of the information in this book has not been needed in past digital designs but isabsolutely necessary today. Most of the information covered here is not covered in standardcollege curricula, at least not in its focus on digital design, which is arguably one of the mostsignificant industries in electrical engineering.The focus of this book is on the design of robust high-volume, high-speed digital productssuch as computer systems, with particular attention paid to computer busses. However, thetheory presented is applicable to any high-speed digital system. All of the techniquescovered in this book have been applied in industry to actual digital products that have beensuccessfully produced and sold in high volume.Practicing engineers and graduate and undergraduate students who have completed basicelectromagnetic or microwave design classes are equipped to fully comprehend the theorypresented in this book. At a practical level, however, basic circuit theory is all thebackground required to apply the formulas in this book.
上传时间： 2013-10-26
上传用户：缥缈
三极管代换手册下载 前言 使用说明 三极管对照表 A B C D E F G H K L M …… 外形与管脚排列图
上传时间： 2013-10-24
上传用户：zjf3110
Radio Frequency Integrated Circuit Design I enjoyed reading this book for a number of reasons. One reason is that itaddresses high-speed analog design in the context of microwave issues. This isan advanced-level book, which should follow courses in basic circuits andtransmission lines. Most analog integrated circuit designers in the past workedon applications at low enough frequency that microwave issues did not arise.As a consequence, they were adept at lumped parameter circuits and often notcomfortable with circuits where waves travel in space. However, in order todesign radio frequency (RF) communications integrated circuits (IC) in thegigahertz range, one must deal with transmission lines at chip interfaces andwhere interconnections on chip are far apart. Also, impedance matching isaddressed, which is a topic that arises most often in microwave circuits. In mycareer, there has been a gap in comprehension between analog low-frequencydesigners and microwave designers. Often, similar issues were dealt with in twodifferent languages. Although this book is more firmly based in lumped-elementanalog circuit design, it is nice to see that microwave knowledge is brought inwhere necessary.Too many analog circuit books in the past have concentrated first on thecircuit side rather than on basic theory behind their application in communications.The circuits usually used have evolved through experience, without asatisfying intellectual theme in describing them. Why a given circuit works bestcan be subtle, and often these circuits are chosen only through experience. Forthis reason, I am happy that the book begins first with topics that require anintellectual approach—noise, linearity and filtering, and technology issues. Iam particularly happy with how linearity is introduced (power series). In therest of the book it is then shown, with specific circuits and numerical examples,how linearity and noise issues arise.
上传时间： 2014-12-23
上传用户：han_zh
介绍高速电路的设计
标签： High-speed Digital Design 高速数字
上传时间： 2013-10-16
上传用户：yt1993410
在高速数字电路飞速发展的今天，信号的频率不断提高, 信号完整性设计在P C B设计中显得日益重要。其中由于传输线效应所引起的信号反射问题是信号完整性的一个重要方面。本文研究分析了高速PCB 设计中的反射问题的产生原因，并利用HyperLynx 软件进行了仿真，最后提出了相应的解决方法。
上传时间： 2013-10-16
上传用户：2728460838
具有OBFL功能的电路板经配置后，可以把故障相关数据存储在非易失性存储器中，并可在日后加以检索和显示以用于故障分析。这些故障记录有助于电路板故障的事后检查。要实现OBFL系统功能，需要同时使用软硬件。在硬件方面，需要：a)确定给出电路板件故障信息的板载OBFL资源(如温度感应器、存储器、中断资源、电路板ID，等等)；b)在电路板或者系统出现故障时用以保存故障信息的板载非易失性存储。OBFL软件的作用是在正常的电路板运行以及电路板故障期间配置电路板变量并将其作为OBFL记录存储在非易失性存储中。OBFL软件还应具备一定的智能，能够分析多项出错事件、记录和历史故障记录，以逐步缩小范围的方式确认故障原因。这种分析可以大大减轻故障排查工作，否则将有大量的OBFL记录需要故障分析工程师手动核查。
上传时间： 2013-11-03
上传用户：1595690
工艺流程波峰焊中的成型工作，是生产过程中效率最低的部分之一，相应带来了静电损坏风险并使交货期延长，还增加了出错的机会。双面贴装A面布有大型IC器件，B面以片式元件为主充分利用PCB空间，实现安装面积最小化，效率高单面混装* 如果通孔元件很少，可采用回流焊和手工焊的方式一面贴装、另一面插装* 如果通孔元件很少，可采用回流焊和手工焊的方式
上传时间： 2013-11-14
上传用户：哈哈hah
Pspice教程课程内容：在这个教程中，我们没有提到关于网络表中的Pspice 的网络表文件输出，有关内容将会在后面提到!而且我想对大家提个建议：就是我们不要只看波形好不好，而是要学会分析，分析不是分析的波形，而是学会分析数据，找出自己设计中出现的问题!有时候大家可能会看到，其实电路并没有错，只是有时候我们的仿真设置出了问题，需要修改。有时候是电路的参数设计的不合理，也可能导致一些莫明的错误!我觉得大家做一个分析后自己看看OutFile文件!点,就可以看到详细的情况了!基本的分析内容：1．直流分析2．交流分析3．参数分析4．瞬态分析进阶分析内容：1． 最坏情况分析.2． 蒙特卡洛分析3． 温度分析4． 噪声分析5． 傅利叶分析6． 静态直注工作点分析数字电路设计部分浅谈附录A: 关于Simulation Setting的简介附录B： 关于测量函数的简介附录C：关于信号源的简介
上传时间： 2014-12-24
上传用户：plsee
当你认为你已经掌握了PCB 走线的特征阻抗Z0，紧接着一份数据手册告诉你去设计一个特定的差分阻抗。令事情变得更困难的是，它说：“……因为两根走线之间的耦合可以降低有效阻抗，使用50Ω的设计规则来得到一个大约80Ω的差分阻抗！”这的确让人感到困惑！这篇文章向你展示什么是差分阻抗。除此之外，还讨论了为什么是这样，并且向你展示如何正确地计算它。 单线：图1(a)演示了一个典型的单根走线。其特征阻抗是Z0，其上流经的电流为i。沿线任意一点的电压为V=Z0*i（ 根据欧姆定律）。一般情况，线对：图1(b)演示了一对走线。线1 具有特征阻抗Z11，与上文中Z0 一致，电流i1。线2具有类似的定义。当我们将线2 向线1 靠近时，线2 上的电流开始以比例常数k 耦合到线1 上。类似地，线1 的电流i1 开始以同样的比例常数耦合到线2 上。每根走线上任意一点的电压，还是根据欧姆定律，
标签： 差分阻抗
上传时间： 2013-10-20
上传用户：lwwhust
