本设计介绍了一种基于STM32单片机控制的智能水杯,可利用插口式电源或无线充电底座为加热器提供能量,并在达到某种饮品所需温度时进行保温。水杯内置充电电池,可选用USB接口或无线充电。在水杯内部设置无线模块,用户利用手机App与水杯进行匹配进行加热操作,加热完后水杯会通过手机App和液晶显示屏实时反馈液体温度,通过指示灯显示电量情况等,给用户进行提醒。该智能水杯设计创新,实用价值较高。This paper introduces an intelligent water cup based by STM32 microcontroller,it can provide energy for the heater by socket type power supply or wireless charging base,and hold temperature needed for some kind of drink.Builtedin rechargeable battery,water cup can use USB or wireless charging.The wireless module is set up inside it,and customers can use mobile App to match and heat.After heating,water cup feeds back liquid temperature through the mobile App,and then displays on LCD,reminds users through the indicator light.The intelligent water cup is designed innovatively and has high practical value.
上传时间： 2022-03-28
上传用户：
文章提出了一种基于AT89S51单片机的智能家居系统的设计,该系统具有室内煤气以及烟雾的检测、家庭室内防盗等功能。文章详细分析了系统的总体设计,详尽分析并设计了煤气传感器模块、烟雾传感器模块、人体红外感应传感器模块、报警模块等各硬件部分,并利用PROTUES软件进行了系统仿真。仿真结果证明:系统具有成本低、效率高、操作方便等优点,达到了预期设计的效果。This paper presents the design of an intelligent home system based on AT89S51 microcontroller.The system has the functions of detecting indoor gas and smoke,guarding against theft in the home,and so on.The overall design of the system is analyzed in detail.The gas sensor module,smoke sensor module,human infrared sensor module,alarm module and other hardware parts are analyzed and designed in detail,and the system simulation is carried out using PROTUES software.The simulation results show that the system has the advantages of low cost,high efficiency,convenient operation and so on,and achieves the expected design effect.
上传时间： 2022-03-28
上传用户：
本文首次设计并验证了基于macom三合一芯片设计的光模块电路,该电路旨在提供一种满足SFF-8472中规定的数字诊断功能的低成本SFP+模块。电路采用激光器驱动、限幅放大器、控制器以及时钟恢复单元集成的单芯片,在保证高精度数字诊断功能基础上,实现了低成本高可靠的特点。该电路在光接收接口组件与激光器驱动和限幅放大器单元的限幅放大器部分之间接入滤波器来提高模块的灵敏度及信号质量。在控制器单元的数字电位器的引脚上采用外加电阻的方式避免出现上电不发光的故障问题。该研究结果为下一代SFP-DD光模块设计与开发工作,奠定了一定的理论与实践基础。This paper designs and validates the optical module circuit based on the MACOM Trinity chip for the first time.This circuit aims to provide a low-cost SFP module which meets the digital diagnosis function specified in SFF-8472.The circuit uses a single chip integrated with laser driver,limiting amplifier,controller and clock recovery unit.On the basis of ensuring high precision digital diagnosis function,it achieves the characteristics of low cost and high reliability.The circuit connects a filter between the optical receiving interface module and the limiting amplifier part of the laser driver and limiting amplifier unit to improve the sensitivity and signal quality of the module.The pin of the digital potentiometer in the controller unit is equipped with an external resistance to avoid the problem of power failure.The research results lay a theoretical and practical foundation for optical module design in high-speed data center.
上传时间： 2022-04-03
上传用户：
实验教学一直是工科教学中不可或缺的组成部分,对培养学生的动手能力,独立思考能力,创新思维与发散思维具有重要的作用。针对目前电路教学实验中电路仿真实验与实物电路实验各自独立,无法统一问题,提出将仿真电路实验与实物电路实验有机的结合同步操作,并使用Web发布实现远程实验操作。采用Multisim作为电路实验仿真平台,NI Eiviss II作为实物电路实验硬件平台,运用LabVIEW整合Multisim电路仿真实验与实物电路实验,实现仿真与实物实验有机结合,两种实验可同步进行。学生在仿真实验中先可探索实验,然后做实物实验。同时运用LabVIEW开发出实验过程人机交互操作接口界面,使用过程中效果良好。Experimental teaching has always been an indispensable part of engineering education.And it always plays an important role in cultivating students'practical ability,independent thinking ability,innovative thinking and divergent thinking.But simulation experiment and physical experiment cannot be unified in the circuit teaching experiment at present.In order to solve this problem,this paper proposes to combine organically the simulation circuit experiment with physical circuit experiment,and synchronously operate them.This paper uses the WEB publishing to achieve remote experimental operation.Multisim is used as the circuit simulation platform,and NI Eiviss II is used as the physical circuit hardware platform.Multisim circuit simulation experiment and physical circuit experiment are implemented by LabVIEW to realize the combination of simulation experiment and physical experiment.Students do explore experiments in simulation experiment firstly,and then do physical experiment.And this paper uses LabVIEW to develop the experimental man-machine interface.
上传时间： 2022-04-05
上传用户：
本文设计了一种磁致伸缩位移传感器,介绍了该磁致伸缩位移传感器的测量原理,通过结构优化设计提高了仪器的性能,详述了硬件电路设计及实现方法,完成了软件设计,实现了高压充电、问询脉冲加载、时间测量及滤波等功能,并通过实验对其性能进行了验证。所研制的磁致伸缩位移传感器具有测量精度高、长期稳定性好等特点,满足了大量程、高精度、恶劣环境等测量的要求。A kind of sensor based on magnetostrictive principle is designed.The measuring principle of the magnetostrictive displacement sensor is introduced,the performance of the instrument is improved by the structural optimization design,and introduced the hardware circuit design and the realization method,completed the software design,realized the functions of the high voltage charging,inquiries pulse loading,time measurement and filtering,and its performance is verified through the experiment.The magnetostrictive displacement sensor has the characteristics of high measuring precision.The sensor meets the requirements of large range,high precision,poor environment and so on.
标签： 位移传感器
上传时间： 2022-04-06
上传用户：
高通蓝牙芯片QCC5144 详细规格手册datasheet （共99页）含各个接口说明，应用原理图等信息。 QualcommTrueWireless™ stereo earbuds (无线双耳） Features（特点） ■ Qualifiedto Bluetooth v5.2 specification （蓝牙协议标准5.2） ■ 120 MHz Qualcomm ® Kalimba ™ audio DSP （120MHz 的音频DSP处理器） ■ 32 MHz/80MHz Developer Processor for applications ■ Firmware Processor for system ■ Flexible QSPI flash programmable platform （可编程的QSPI外挂存储器） ■ High-performance 24‑bit audio interface （高性能的24位音频接口） ■ Digital and analog microphone interfaces （含 数字 及模拟 MIC接口） ■ Flexible PIO controller and LED pins with PWM support ■ Serial interfaces: UART, Bit Serializer (I²C/SPI), USB 2.0 （支持串口，I2C， SPI，USB 接口） ■ Advanced audio algorithms （高级的音频算法） ■ ActiveNoise Cancellation: （支持ANC 主动降噪功能） Hybrid, Feedforward, and Feedback modes, using Digital or Analog Mics, enabled using license keys available from Qualcomm® ■ Qualcomm ® aptX ™ and aptX HD Audio （支持独特的aptx 功能）
上传时间： 2022-04-07
上传用户：
高通蓝牙芯片QCC3040 详细规格手册datasheet （共96页）QualcommTrueWireless™ stereo earbuds (无线双耳）Features（特点）■ Qualifiedto Bluetooth v5.2 specification （蓝牙协议标准5.2）■ 120 MHz Qualcomm ® Kalimba ™ audio DSP （120MHz 的音频DSP处理器）■ 32 MHz Developer Processor for applications （32MH的 应用处理器）■ Firmware Processor for system■ Flexible QSPI flash programmable platform （可编程的QSPI外挂存储器）■ High-performance 24‑bit audio interface （高性能的24位音频接口）■ Digital and analog microphone interfaces （含 数字 及模拟 MIC接口）■ Flexible PIO controller and LED pins with PWM support■ Serial interfaces: UART, Bit Serializer (I²C/SPI), USB 2.0 （支持串口，I2C， SPI，USB 接口）■ Advanced audio algorithms （高级的音频算法）■ ActiveNoise Cancellation: （支持ANC 主动降噪功能）Hybrid, Feedforward, and Feedback modes, using Digitalor Analog Mics, enabled using license keys available from Qualcomm®■ Qualcomm ® aptX ™ and aptX HD Audio （支持独特的aptx 功能）
上传时间： 2022-04-09
上传用户：slq1234567890
随着电磁阀在工业和日常应用的增多,其功耗越来越被人们所重视。通过对电磁阀驱动电路的研究,设计一套电磁阀节能驱动电路。不仅提高了电磁阀的响应时间,更重要的是降低了功耗,使电磁阀由工作在大电流状态下,变成大电流启动小电流维持的工作状态。减少了由电流过大引起的电磁阀线圈过热,增加了电磁阀的安全性。The power consumption of an electromagnetic valve is drawing increasingly more attentiori as it is widely used in industrial production and daily life. In this study, an energy - saving driving circuit of electromagnetic valves was designed. It can make an electromagnetic valve to start with a high current while work with a low current; thereby the power consumption can be reduced. Besides, it can shorten the response time of an electromagnetic valve and improve the security of the valve.
上传时间： 2022-04-16
上传用户：
为了提高超高频RFID系统中阅读器在低信噪比的情况下仍具有较高的识别能力,提出一种基于FPGA系统结合软件无线电方法实现超高频RFID射频前端电路方案。超高频射频识别系统必须符合EPC Class 1generation 2标准,所设计的电路系统以Xilinx公司的XC6SLX16-2CSG324FPGA芯片为硬件基础,将数字基带调制解调和中频滤波电路在FPGA系统中设计实现,重点阐述了射频前端电路的设计结构、AD/DA转换电路,以及数字滤波器的设计。实验结果表明,所设计的超高频RFID阅读器简化了前端电路系统结构,提升了稳定性,增强了抗干扰能力。该电路系统在信噪比较低的情况下,能够较好地实现915MHz频率的射频接收和发送。In order to improve the reader UHF RFID system still has a higher ability to identify,in the case of low signal-to-noise ratio.The UHF RFID systems must comply with EPC Class 1 generation 2 standard.In this paper,the design of the circuit system based on Xilinx＇s XC6SLX16-2CSG324 FPGA chip,and presents UHF RFID RF front-end circuit with software radio based on FPGA system.Digital baseband modem and IF filter circuit is designed and implemented in the FPGA system,and focused on designing the structure of the RF front-end circuit,AD/DA conversion circuits,and digital filter.Experimental results show that the UHF RFID reader de...
标签： 915mhz 超高频 rfid 阅读 射频 前端 电路 设计
上传时间： 2022-04-17
上传用户：shjgzh
HC-SR501 High Sensitivity Human Infrared Sensor Module Pyroelectric PCB.doc人体红外感应原理图
标签： 红外感应
上传时间： 2022-04-18
上传用户：
