This paper presents a space vector modulation(SVM)-based switching strategy for a three-level neutral point clamped (NPC) converter that is adapted as a STATCOM.
上传时间： 2013-10-20
上传用户：zyt
Who has never experienced oscillations issues when using an operational amplifier? Opampsare often used in a simple voltage follower configuration. However, this is not the bestconfiguration in terms of capacitive loading and potential risk of oscillations.Capacitive loads have a big impact on the stability of operational amplifier-basedapplications. Several compensation methods exist to stabilize a standard op-amp. Thisapplication note describes the most common ones, which can be used in most cases.The general theory of each compensation method is explained, and based on this, specific
上传时间： 2013-10-28
上传用户：chenbhdt
Control systems are becoming increasingly dependent on digital processing and so require sensors able to provide direct digital inputs. Sensors based on time measurement, having outputs based on a frequency or phase, have an advantage over conventional analogue sensors in that their outputs can be measured directly in digital systems by pulse counting.
上传时间： 2013-10-08
上传用户：wuyuying
A complete design for a data acquisition card for the IBM PC is detailed in this application note. Additionally, C language code is provided to allow sampling of data at speed of more than 20kHz. The speed limitation is strictly based on the execution speed of the "C" data acquisition loop. A "Turbo" XT can acquire data at speeds greater than 20kHz. Machines with 80286 and 80386 processors can go faster than 20kHz. The computer that was used as a test bed in this application was an XT running at 4.77MHz and therefore all system timing and acquisition time measurements are based on a 4.77MHz clock speed.
上传时间： 2013-10-29
上传用户：BOBOniu
Low power operation of electronic apparatus has becomeincreasingly desirable. Medical, remote data acquisition,power monitoring and other applications are good candidatesfor battery driven, low power operation. Micropoweranalog circuits for transducer-based signal conditioningpresent a special class of problems. Although micropowerICs are available, the interconnection of these devices toform a functioning micropower circuit requires care. (SeeBox Sections, “Some Guidelines for Micropower Designand an Example” and “Parasitic Effects of Test Equipmenton Micropower Circuits.”) In particular, trade-offs betweensignal levels and power dissipation become painful whenperformance in the 10-bit to 12-bit area is desirable.
上传时间： 2013-10-22
上传用户：rocketrevenge
The equal-area theorem●This is sinusoidal PWM (SPWM)●The equal-area theorem can be appliedto realize any shape of waveforms ●Natural sampling●Calculation based on equal-area criterion●Selected harmonic elimination●Regular sampling●Hysteresis-band control●Triangular wave comparison withfeedback control
上传时间： 2013-11-22
上传用户：linyao
Radio Frequency Integrated Circuit Design I enjoyed reading this book for a number of reasons. One reason is that itaddresses high-speed analog design in the context of microwave issues. This isan advanced-level book, which should follow courses in basic circuits andtransmission lines. Most analog integrated circuit designers in the past workedon applications at low enough frequency that microwave issues did not arise.As a consequence, they were adept at lumped parameter circuits and often notcomfortable with circuits where waves travel in space. However, in order todesign radio frequency (RF) communications integrated circuits (IC) in thegigahertz range, one must deal with transmission lines at chip interfaces andwhere interconnections on chip are far apart. Also, impedance matching isaddressed, which is a topic that arises most often in microwave circuits. In mycareer, there has been a gap in comprehension between analog low-frequencydesigners and microwave designers. Often, similar issues were dealt with in twodifferent languages. Although this book is more firmly based in lumped-elementanalog circuit design, it is nice to see that microwave knowledge is brought inwhere necessary.Too many analog circuit books in the past have concentrated first on thecircuit side rather than on basic theory behind their application in communications.The circuits usually used have evolved through experience, without asatisfying intellectual theme in describing them. Why a given circuit works bestcan be subtle, and often these circuits are chosen only through experience. Forthis reason, I am happy that the book begins first with topics that require anintellectual approach—noise, linearity and filtering, and technology issues. Iam particularly happy with how linearity is introduced (power series). In therest of the book it is then shown, with specific circuits and numerical examples,how linearity and noise issues arise.
上传时间： 2014-12-23
上传用户：han_zh
数字与模拟电路设计技巧IC与LSI的功能大幅提升使得高压电路与电力电路除外，几乎所有的电路都是由半导体组件所构成，虽然半导体组件高速、高频化时会有EMI的困扰，不过为了充分发挥半导体组件应有的性能，电路板设计与封装技术仍具有决定性的影响。 模拟与数字技术的融合由于IC与LSI半导体本身的高速化，同时为了使机器达到正常动作的目的，因此技术上的跨越竞争越来越激烈。虽然构成系统的电路未必有clock设计，但是毫无疑问的是系统的可靠度是建立在电子组件的选用、封装技术、电路设计与成本，以及如何防止噪讯的产生与噪讯外漏等综合考虑。机器小型化、高速化、多功能化使得低频/高频、大功率信号/小功率信号、高输出阻抗/低输出阻抗、大电流/小电流、模拟/数字电路，经常出现在同一个高封装密度电路板，设计者身处如此的环境必需面对前所未有的设计思维挑战，例如高稳定性电路与吵杂(noisy)性电路为邻时，如果未将噪讯入侵高稳定性电路的对策视为设计重点，事后反复的设计变更往往成为无解的梦魇。模拟电路与高速数字电路混合设计也是如此，假设微小模拟信号增幅后再将full scale 5V的模拟信号，利用10bit A/D转换器转换成数字信号，由于分割幅宽祇有4.9mV，因此要正确读取该电压level并非易事，结果造成10bit以上的A/D转换器面临无法顺利运作的窘境。另一典型实例是使用示波器量测某数字电路基板两点相隔10cm的ground电位，理论上ground电位应该是零，然而实际上却可观测到4.9mV数倍甚至数十倍的脉冲噪讯(pulse noise)，如果该电位差是由模拟与数字混合电路的grand所造成的话，要测得4.9 mV的信号根本是不可能的事情，也就是说为了使模拟与数字混合电路顺利动作，必需在封装与电路设计有相对的对策，尤其是数字电路switching时，ground vance noise不会入侵analogue ground的防护对策，同时还需充分检讨各电路产生的电流回路(route)与电流大小，依此结果排除各种可能的干扰因素。以上介绍的实例都是设计模拟与数字混合电路时经常遇到的瓶颈，如果是设计12bit以上A/D转换器时，它的困难度会更加复杂。
上传时间： 2013-11-16
上传用户：731140412
PCB 被动组件的隐藏特性解析 传统上，EMC一直被视为「黑色魔术（black magic）」。其实，EMC是可以藉由数学公式来理解的。不过，纵使有数学分析方法可以利用，但那些数学方程式对实际的EMC电路设计而言，仍然太过复杂了。幸运的是，在大多数的实务工作中，工程师并不需要完全理解那些复杂的数学公式和存在于EMC规范中的学理依据，只要藉由简单的数学模型，就能够明白要如何达到EMC的要求。本文藉由简单的数学公式和电磁理论，来说明在印刷电路板（PCB）上被动组件（passivecomponent）的隐藏行为和特性，这些都是工程师想让所设计的电子产品通过EMC标准时，事先所必须具备的基本知识。导线和PCB走线导线（wire）、走线（trace）、固定架……等看似不起眼的组件，却经常成为射频能量的最佳发射器（亦即，EMI的来源）。每一种组件都具有电感，这包含硅芯片的焊线（bond wire）、以及电阻、电容、电感的接脚。每根导线或走线都包含有隐藏的寄生电容和电感。这些寄生性组件会影响导线的阻抗大小，而且对频率很敏感。依据LC 的值（决定自共振频率）和PCB走线的长度，在某组件和PCB走线之间，可以产生自共振（self-resonance），因此，形成一根有效率的辐射天线。在低频时，导线大致上只具有电阻的特性。但在高频时，导线就具有电感的特性。因为变成高频后，会造成阻抗大小的变化，进而改变导线或PCB 走线与接地之间的EMC 设计，这时必需使用接地面（ground plane）和接地网格（ground grid）。导线和PCB 走线的最主要差别只在于，导线是圆形的，走线是长方形的。导线或走线的阻抗包含电阻R和感抗XL = 2πfL，在高频时，此阻抗定义为Z = R + j XL j2πfL，没有容抗Xc = 1/2πfC存在。频率高于100 kHz以上时，感抗大于电阻，此时导线或走线不再是低电阻的连接线，而是电感。一般而言，在音频以上工作的导线或走线应该视为电感，不能再看成电阻，而且可以是射频天线。
上传时间： 2013-10-09
上传用户：时代将军
本文将接续介绍电源与功率电路基板，以及数字电路基板导线设计。宽带与高频电路基板导线设计a.输入阻抗1MHz，平滑性(flatness)50MHz 的OP增幅器电路基板图26 是由FET 输入的高速OP 增幅器OPA656 构成的高输入阻抗OP 增幅电路，它的gain取决于R1、R2，本电路图的电路定数为2 倍。此外为改善平滑性特别追加设置可以加大噪讯gain，抑制gain-频率特性高频领域时峰值的R3。图26 高输入阻抗的宽带OP增幅电路图27 是高输入阻抗OP 增幅器的电路基板图案。降低高速OP 增幅器反相输入端子与接地之间的浮游容量非常重要，所以本电路的浮游容量设计目标低于0.5pF。如果上述部位附着大浮游容量的话，会成为高频领域的频率特性产生峰值的原因，严重时频率甚至会因为feedback 阻抗与浮游容量，造成feedback 信号的位相延迟，最后导致频率特性产生波动现象。此外高输入阻抗OP 增幅器输入部位的浮游容量也逐渐成为问题，图27 的电路基板图案的非反相输入端子部位无full ground设计，如果有外部噪讯干扰之虞时，接地可设计成网格状(mesh)。图28 是根据图26 制成的OP 增幅器Gain－频率特性测试结果，由图可知即使接近50MHz频率特性非常平滑，-3dB cutoff频率大约是133MHz。
标签： PCB
上传时间： 2013-11-13
上传用户：hebanlian
